The Rhino Coffee Gear RHPR600-S has been designed to fit in the counter of cafes, restaurants, espresso bars, juice and cocktail bars.
All Rhino Coffee Gear Rinsers are Certified by NSF International and conform to the requirements of NSF/ANSI 169 - Special Purpose Food Equipment and Devices. Click Here for documentation.
This vessel rinser features a new honeycomb drain tray grid and a new Actuator Star design, which both help to prevent liquid retention on the working surfaces. It also includes a Rhino Spinjet Valve which sprays and spins at the same time for an effective clean. At 600mm in length, the RHPR600-S fits multiple milk pitchers and blenders pitchers comfortably, making it perfect for all busy hospitality environments.
FEATURES:
EFFECTIVE MECHANICAL CLEANING The Spinjet Valve sprays and spins at the same time creating a more robust mechanical cleaning action than regular rinsing valves. It is ideal for press type brewers using tea leaves, stubborn coffee grounds, milk and other residues that can often be difficult to clean.
SUPERIOR DRAINAGE The honeycomb grate design helps increase the open space of the grid, reducing static build-up of liquids and making cleaning easy. The low profile body is optimally sloped to ensure effective removal of liquids, reducing common odors caused from static waste. A large drain outlet and wide grate-free opening near the drain creates a convenient location to quickly discard larger volumes of liquid.
LARGER VESSEL OPTIONS The Actuator Star diameter allows both small and larger vessels to be cleaned easily.
An ideal add-on for blender jugs and other larger vessels is the Blender Adapter Kit. This kit includes an extension rod and a larger actuator to suit plungers, milkshake cups, and popular blender jugs such as Blendtec® and Vitamix®.
SPECIFICATIONS
- Dimensions (approx): 238mm (W) x 600mm (L) 85mm (D) approx. (9.38 x 23.6 x 3.35 in) (Depth from drain elbow to top of bench.) - Materials: Stainless Steel - Drain Hose: 25mm/1Inch (not included)
-NSF Certified
Standard Inclusions:
1x Sink
1x Spin jet spray valve (Standard or Hot)*
1x Hexagon grate drip tray
1 x John Guest Hose Adapter (drain hose not included)
* Standard SpinJet Valve for cold water use only or Hot Valve 3EDP for use with hot water, best for use with blended drinks or milks
Depth Requirements: The Rhino rinsers are 1.57" deep, however, this is without fittings. We recommend at least 6" of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.
*PLEASE NOTE* -PLV: It is recommended that a Pressure Limiting Valve (PLV) is used when installing on a mains water line. -Do not cut out bench top surfaces prior to receiving your rinser: Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical vessel rinser on-hand prior to cutting into bench top surfaces. Bombora Supplies does not take responsibility for errors concerning installation and provides the sizes and dimensions as a layout guide only.
The Rhino Coffee Gear RHPR300-S has been designed to fit in the bench of cafes, restaurants, coffee bars, and juice bars. This vessel rinser features a new honeycomb drain tray and a new Actuator Star design, which both help to prevent liquid build-up. It also includes a Rhino Spinjet Valve which sprays and spins at the same time for an effective clean. Sitting at 300mm in length, the RHPR300-S fits multiple milk pitchers comfortably, making it perfect for all busy hospitality environments.
Features:
Better Drainage - The drain sink has a sloped surface and large 2" drain ensuring that there is no residue left behind
Bigger Vessels - The large actuator plate makes it useful across a broader range of equipment. Now you can rinse your french press and Chemex devices on your rinser!
Spinjet Spray Mechanism - The new Spinjet valve spins and sprays at the same time creating a more robust mechanical cleaning action than normal rinsing valves. It is ideal for plungers using tea & coffee grounds, milk and other residues that tend to hold firm.
NSF Certified - All Rhino Coffee Gear Milk Pitcher Rinsers are NSF Certified.
Specifications:
Dimensions (approx): 231mm / 9.09in (W) x 354mm / 13.97in (L) 85mm / 9.34in (D) approx. (Depth from drain elbow to top of the bench.)
12" x 9"
Materials: Stainless Steel
Drain Hose: 25mm/1" size (not included)
NSF Certified
Standard Inclusions:
1x Sink
1x Spin jet spray valve (Standard or Hot)*
1x Hexagon grate drip tray
1 x John Guest Hose Adapter (drain hose not included)
* Standard SpinJet Valve for cold water use only or Hot Valve 3EDP for use with hot water, best for use with blended drinks or milks
Add on:
Looking for an install kit for your Caffewerks Pump System? Click Here
All Rhino Coffee Gear Rinsers are Certified by NSF International and conform to the requirements of NSF/ANSI 169 - Special Purpose Food Equipment and Devices. Click Here for documentation
The Rhino Caffewerks Spinjet valve sprays and spins at the same time creating a more robust mechanical cleaning action than normal rinsing valves. It is ideal for plungers using tea & coffee grounds, milk and other residues that tend to hold firm.
Suitable upgrade to most spray mechanisms and pitcher rinser spray assemblies.
The height of the rinser is 40mm above the actuator plate
Please note: If you are retro-fitting the Rhino Coffee Gear spray assembly to a current rinser with drain tray, we recommend seating the actuator plate under the drain tray to ensure full and correct action can be achieved when depressed.
Rhino Coffee Gear has reimagined the tried and tested Spinjet valve system to meet the changing needs of the industry. With an all-new extended stainless steel body, coupled with CNC-milled Delrin, and robust seal components, the RH3PE valve provides customers with the ability to use the valve in HOT water applications (Up to 55 degrees Celsius / 131 Degrees Fahrenheit).
Cleaning and maintaining your beverage pitchers properly is a multi-step process. Regular rinsing of these implements throughout the day is key to removing unwanted solids that can cause cross-contamination in your finished product, and lessen the life of the tools you used to produce them. The existing technology in Rhino’s patented Spinjet technology utilises water pressure to channel flow into the cleaning jets, creating a fast rotating motion. This rotating movement creates a superior cleaning action that rinses matter away from the surface from multiple angles.
How do you improve a fantastic cleaning action when chemicals are not practical? We add temperature. Warm water assists in making a large number of contaminants more soluble which in turn, makes them easier to remove from a surface.
Suitable for the cleaning of beverage implements used in making fruit juices, non-dairy-based smoothies, and alcoholic, and non-alcoholic cocktails.
Product Specifications:
Dimensions (approximate): 140 mm (Length total) - 60 mm (Length above sink) - 85mm (Length below sink).
Materials: Stainless Steel body, Delrin Spinjet.
Inlet thread size : ½: BSP Male thread
Certifications:
The RH3PE-SPINSET valve is NSF certified to standard ASME 1812.19.13 / CSA B45.4 2017, when installed in conjunction with a sink that meets regulatory standards. Installation Information:
Depth Requirements: The Rhino rinsers are 40mm deep, however, this is without fittings. We recommend at least 150mm of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.
It is recommended that the RH3PE-SPINSET is installed in conjunction with a 350 kpa / 50 psi PLV.
It is also recommended that the RH3PE-SPINSET is installed in conjunction with a Tempering valve set at no greater than 55 Degrees Celsius / 131 Degrees Fahrenheit.
This rinser kit features the standard Rhino 600mm Spinjet Pitcher Rinser with an additional Blender attachment for larger vessels and popular blender jugs such as Vitamix and Blendtec.
All Rhino Coffee Gear Rinsers are Certified by NSF International and conform to the requirements of NSF/ANSI 169 - Special Purpose Food Equipment and Devices. Click Here for documentation
The RHPR600-S-BL features the standard Rhino Spinjet Valve, which spins and sprays in a fast, sweeping action, easily removing stubborn waste from your vessel. Its low profile body is optimally sloped and angled to ensure effective removal of liquids, reducing common odours caused from static waste. The additional large actuator plate supports blender jugs and larger vessels such as plungers and milkshake cups.
This rinser kit contains: - 1 x Rhino 600mm Spinjet Rinser (RHPR600-S) * standard or Hot valve available - 1 x Rhino Rinser Blender Attachment (RHBRM)
* Standard SpinJet Valve for cold water use only or Hot Valve 3EDP for use with hot water, best for use with blended drinks or milks
Features: - Single drain tray - Rhino Spinjet Valve - Low profile body - Large drain outlet - Large actuator plate - Easy to clean - NSF Certified