We BEAT any price on this as we are the manufacturer and designer.

• Rhino Coffee Gear Spinjet Spray Assembly with actuator plate.
• Suitable upgrade to most spray mechanisms and pitcher rinser spray assemblies
• Certifications: NSF, CSA, CalGreen Compliant, Massachusetts State Plumbing Board approved
• Coldwater use only
• Check out this conversion video

The Rhino Caffewerks Spinjet valve sprays and spins at the same time creating a more robust mechanical cleaning action than normal rinsing valves. It is ideal for plungers using tea & coffee grounds, milk and other residues that tend to hold firm.

Suitable upgrade to most spray mechanisms and pitcher rinser spray assemblies.

Actuator star diameter: 135mm / 5.3" standard

A 123mm /4.8"Actuator star is available for retrofit purposes

Connection: External 1/2" thread, suggested install parts include  CI321214S & Push Fit 3/8 Stem Elbow or our exclusive one piece elbow

The height of the rinser is 40mm above the actuator plate

Please note: If you are retro-fitting the Rhino Coffee Gear spray assembly to a current rinser with drain tray, we recommend seating the actuator plate under the drain tray to ensure full and correct action can be achieved when depressed.


Cold water use only

 Install, Spec and FAQ information, Click Here! 

Rhino Spinjet HOT Spray Assembly & Actuator Star // 3-EDP

Rhino Coffee Gear Spinjet upgrade allows you to easily turn your standard Rhino Coffee Gear spray assembly into a Spinjet option. Simply unscrew the current shower and screw on the spinjet.

The Spinjet upgrade valve sprays and spins at the same time creating a more robust mechanical cleaning action than normal rinsing valves. It is ideal for plungers using tea and coffee grounds, milk and other residues that tend to hold firm.

Click here to view the Spinjet parts diagram. 

Certifications:

- CalGreen Compliant
- Massachusetts State Plumbing Board approved

SPINJET Pitcher Rinser / Glass Rinser Service Gasket Kit for routine maintenance & gasket replacement on the Rhino Coffee Gear Spinjet Rinser & Valve Set.

These all silicone gaskets out perform old style rubber gaskets. A new spring is included to maintain good return pressure.

The Rhino Spinjet Valve Service Gasket Kit has been designed for routine maintenance and gasket replacement on the Rhino Coffee Gear Spinjet Rinser and Valve Set.

Inclusions:

• 1 x Spring
• 1x Piston Gasket
• 3 x Mechanism O-rings

Please note: This gasket kit is suitable for replacing gaskets in the RHPR600-S, RHSPINSET, RHPR300-S, RHPR150-S. 

Looking for other SpinJet Repair Parts

Here is a great video on how to install the parts

Trouble Shoot and FAQ information 

Rhino Spinjet Valve Service Gasket Kit 3 - EDPM has been produced to allow current users of the Rhino Spinjet valve platform to upgrade, to our hot water (55 Deg C)  suitable variant, utilising hard-wearing, and durable EPDM material. This Gasket kit is suitable for use in routine maintenance and gasket replacement on the Rhino Coffee Gear RHSPINSET, and RH3PE Spinjet Rinser and Valve Sets.

Inclusions:

• 1 x Spring
• 1x Piston Gasket
• 3 x Mechanism O-rings”

The RHVCS-SP is a replacement stainless steel vented cap screw for the Rhino Coffee Gear Pitcher Rinser Spinjet Valve.

Specifications:

- Diameter: 8mm
- Length: 10mm
- Thread: G3/16
- Suits: RHSPINUPGRADE
- Pack of 3

Mechanism Piston Screw for Rhino Coffee Gear Pitcher Rinsers.

Specifications:

• Dimensions: 35mm (L) x 4mm (Head:11mm in diameter)
• Suits: Rhino Spinset variations ONLY - RHSPINSET, RHPR600-S, RHPR300-S

Fits: Rhino Spinset  - RHSPINSET, RHPR600-S, RHPR300-S

as well as all CBC, krome dispense and Espressoparts rinsers

3 pack of replacement washers to suit the Rhino Spinjet Rinser Valve. 

SPINJET Pitcher Rinser / Glass Rinser Service Parts for routine maintenance / replacement on the Rhino Coffee Gear Spinjet Rinser & Valve Set.

These 304 stainless steel wobbly washers help lock the Spinjet to the valve. 

Specifications:

• Material: Stainless Steel
• Quantity: Pack of 3

This pitcher rinser connection fitting is Push Fit 3/8 tube x 1/2 BSP 90 degree elbow.

That elusive piece that you can’t buy at the hardware store. 

If you are installing a rinser in a low profile setting this helps get it done.

Looking for the straight version of the rinser fitting?

The Rhino Coffee Gear Blender Rinser Attachment allows users to clean their blender jugs at their existing in-bench Rhino Pitcher Rinser, instead of at the sink.

At 198mm wide (7.80 in), the Rhino Blender Rinser Attachment suits the majority of blender jugs on the market. The Actuator Plate sits over the existing spray head and is secured into position by the stainless steel riser and spinjet valve. This increases the height by 100mm (3.93 in) to ensure a thorough, effortless clean, every time.

This functional attachment can be used as a vessel cleaner for many different environments, including cafes, espresso bars, restaurants, bars, smoothie bars, and juice bars.

Kit contains:

1x Black Actuator Plate
1 x Stainless Steel Riser (Please note: This item does not include the Spray Valve, Spinjet Adapter, or the Rinser Tray)

Material: BPA-free plastic and stainless steel

Dimensions: 198mm (W) x 100mm (H)

-At 198mm wide (7.79"), the Rhino Blender Rinser Attachment suits the majority of blender jugs on the market. 

The Rhino Blender Rinser Attachment Spinjet Set is the complete adapter kit to transform your existing standard 600mm or 300mm Rhino Pitcher Rinser into a rinser for larger vessels and blenders.

This set allows large vessels and blender jugs to be rinsed easily, with a Spinjet Valve, a riser, and a large actuator plate. The Spinjet Valve sprays and spins at the same time for an effective and efficient clean, while the stainless steel riser extends the height of the Valve to ensure the spray reaches even the tallest vessels and blender jugs. The large actuator plate is 198mm wide, to fit the most popular blender jug brands such as Blendtec and Vitamix.

The RHBRM-SB kit contains:

1 x Spinjet Upgrade (top section only)
1 x Stainless Steel Riser
1 x Black Blender Actuator Plate (plastic)
1 x Stainless Steel bush

-At 198mm wide (7.79"), the Rhino Blender Rinser Attachment suits the majority of blender jugs on the market.

The Rhino Coffee Gear Actuator Star is a replacement actuator for any existing Rhino Coffee Gear Pitcher Rinser.

The RHPRSTAR suits the RHPR300, RHPR600, RHPR600-S, RHPR300-BL, RHPR600-BL, RHPR600-2BL, and the RHPR600-S-BL.

Diameter: 135mm / 5.3" or 123mm /4.8" 

135mm will fit both the 300mm and 600mm rinsers 

123mm will fit older style rinser units 

Material: Stainless Steel

Back Stock / Older style SpinJet Rinser Valve Actuator Plate 

*Please allow 7-14 days for shipping as this ships from the AU warehouse*

Rhino Coffee Gear Hex Rinser Tray suits the Rhino 300mm Pitcher Rinser range.

Dimensions: 300mm (L) x 175mm (W)

Has a built in 90 degree elbow that connects to the drain fitting on the 150mm rinser 

This hose fits snug onto the SpinJet Rinser Drain

elbow sleeve internal ø 22 mm
straight sleeve internal ø 19 mm

Perfect for use with our 300mm, 600mm and Caffewerks Mini Rinser pitcher rinsers. 

This hose fits snug onto the SpinJet Rinser Drain

5ft long 

straight sleeve internal ø 19 mm

Our pitcher rinser install kit is designed to work with our water pump systems. Also works great when connecting to standard water service. 

kit includes: 

6’ 3/8 tubing

(1) 3/8 tube check valve

(1) 3/8 on /off ball valve

(1) Rinser Connection Fitting Push Fit 3/8 tube x 1/2 BSP 90 Angle elbow

(1) 3/8 Tube Union Tee

Need a Tubing Cutter? 

• Spout Type : Long Reach
• Height : 9"
• Reach : 5.5"
• Stud Length : 3"
• NSF/ANSI Certified : Yes

These quick connection fittings make removal of equipment and devices easy.

These Push Fit 3/8” x Quick Connect are made of rugged FDA approved Acetal Plastic. Each connector has a built in check valve so no water is lost during disconnected transport. Each kit includes one female and one male quick connect.

Available as individual Male and Female parts as well. 

Easy installation just like all of our push fittings.

The Rhino Coffee Gear RHPR300-S has been designed to fit in the bench of cafes, restaurants, coffee bars, and juice bars. This vessel rinser features a new honeycomb drain tray and a new Actuator Star design, which both help to prevent liquid build-up. It also includes a Rhino Spinjet Valve which sprays and spins at the same time for an effective clean. Sitting at 300mm in length, the RHPR300-S fits multiple milk pitchers comfortably, making it perfect for all busy hospitality environments.

Features: 

Better Drainage - The drain sink has a sloped surface and large 2" drain ensuring that there is no residue left behind

Bigger Vessels - The large actuator plate makes it useful across a broader range of equipment. Now you can rinse your french press and Chemex devices on your rinser!

Spinjet Spray Mechanism - The new Spinjet valve spins and sprays at the same time creating a more robust mechanical cleaning action than normal rinsing valves. It is ideal for plungers using tea & coffee grounds, milk and other residues that tend to hold firm.

NSF Certified - All Rhino Coffee Gear Milk Pitcher Rinsers are NSF Certified.

Specifications:

• Dimensions (approx): 231mm / 9.09in (W) x 354mm / 13.97in (L) 85mm / 9.34in (D) approx. (Depth from drain elbow to top of the bench.) 
• 12" x 9" 
• Materials: Stainless Steel
• Drain Hose: 25mm/1" size 
• NSF Certified

Standard Inclusions:

• 1x Sink
• 1x Spin jet spray valve 
• 1x Hexagon grate drip tray
• 1 x John Guest Hose Adapter
• 1x Drain Hose 
• 1 x Caffewerks Install Kit for pitcher rinser 

* Standard SpinJet Valve for cold water use only or Hot Valve 3EDP for use with hot water, best for use with blended drinks or milks 

All Rhino Coffee Gear Rinsers are Certified by NSF International and conform to the requirements of NSF/ANSI 169 - Special Purpose Food Equipment and Devices. Click Here for documentation.

This vessel rinser features a new honeycomb drain tray grid and a new Actuator Star design, which both help to prevent liquid retention on the working surfaces. It also includes a Rhino Spinjet Valve which sprays and spins at the same time for an effective clean. At 600mm in length, the RHPR600-S fits multiple milk pitchers and blenders pitchers comfortably, making it perfect for all busy hospitality environments.

FEATURES:

EFFECTIVE MECHANICAL CLEANING
The Spinjet Valve sprays and spins at the same time creating a more robust mechanical cleaning action than regular rinsing valves. It is ideal for press type brewers using tea leaves, stubborn coffee grounds, milk and other residues that can often be difficult to clean. 

SUPERIOR DRAINAGE
The honeycomb grate design helps increase the open space of the grid, reducing static build-up of liquids and making cleaning easy. 
The low profile body is optimally sloped to ensure effective removal of liquids, reducing common odors caused from static waste. 
A large drain outlet and wide grate-free opening near the drain creates a convenient location to quickly discard larger volumes of liquid.

LARGER VESSEL OPTIONS
The Actuator Star diameter allows both small and larger vessels to be cleaned easily.

An ideal add-on for blender jugs and other larger vessels is the Blender Adapter Kit. This kit includes an extension rod and a larger actuator to suit plungers, 
milkshake cups, and popular blender jugs such as Blendtec® and Vitamix®.

SPECIFICATIONS

- Dimensions (approx): 238mm (W) x 600mm (L) 85mm (D) approx. (9.38 x 23.6 x 3.35 in) (Depth from drain elbow to top of bench.)
- Materials: Stainless Steel

-NSF Certified 

Standard Inclusions:

• 1x Sink
• 1x Spin jet spray valve
• 1x Hexagon grate drip tray
• 1 x John Guest Hose Adapter
• 1x Drain hose 
• 1x Caffewerks Install Kit for Pitcher Rinser 

* Standard SpinJet Valve for cold water use only or Hot Valve 3EDP for use with hot water, best for use with blended drinks or milks 

Depth Requirements: 
The Rhino rinsers are 1.57" deep, however, this is without fittings. We recommend at least 6" of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.

The Rhino Coffee Gear RHPR150-S has been designed to fit in the bench of cafes, coffee bars, and other hospitality environments. This vessel rinser features a new actuator star design and a Rhino Spinjet Valve which sprays and spins at the same time for an effective clean. Sitting at 150mm in length, the RHPR150-S is the most compact pitcher rinser in the Rhino range and is the perfect option for smaller cafes and coffee bars.

Standard Inclusions:

• 1x Sink 150mm
• 1x Spin jet spray valve
  
• 1 x John Guest Hose Adapter 
• 1x Drain Hose 
• 1 x Caffewerks Install Kit for pitcher rinser 

* Standard SpinJet Valve for cold water use only or Hot Valve 3EDP for use with hot water, best for use with blended drinks or milks