• Rigid, 7-gallon /  26.5 liter rectangular water container with molded contour grip
• Made with BPA free HDPE Plastic
• Space-saving design for easy storing and stacking when empty
• New and improved screw-on vent; hideaway spigot for on-demand water dispensing
• Suitable for outdoors activities and emergency water storage
• NOTE: Prolonged exposure to direct sunlight will cause the water container to degrade and become brittle, increasing the chance of leaks. It is highly recommended to store water containers in cool shaded areas.
• Five-year warranty against manufacturer's defects
• Measurements are 11.5 x 12 x 16 inches
• 
  
  2lbs 

Please note: Water tanks/jugs are not eligible for return or exchange. 

• Works seamlessly with all Caffewerks water pump systems using our CPC quick connects.
• At 3 gallons of volume the tanks are lighter to carry and they fit very well in cart configurations.

• Perfect for use in mobile food service, including food trucks and mobile carts, Home espresso machine installs, and anywhere else you need portable water containers.
• Volume-maximizing design — while many water containers contain 10L, ours goes to 11. 
  
• Multiple dispensing options built in, including two openings for easy filling, dispensing, and cleaning.
• Use these for camping too! Designed to be easy to carry from car to campsite and fits in the space behind your vehicle’s wheel well.
• Comfortable, removable webbed carry handles, built-in tiedown guides.
• Spigot and quick-connect fitting for accessory attachment included.
• Constructed from BPA-free, food-grade LDPE.

Consists of:
1 x Hydration Water Jug 11L / 2.9 Gal

Product Dimensions:
254mm (10") L x 178mm (7.01") W x 369mm (14.53") H

Weight:
1.75kg (3.86lbs)

Operating Instructions

Please note: Water tanks/jugs are not eligible for return or exchange. 

Rugged and ready for anything in its path, the Rhino-Pak is a heavy-duty, puncture-resistant water container built for the toughest excursions.

• 5.5 gallon (23L) capacity
• Made rugged — 33% thicker than standard water containers
• Durable spout and vent cap
  
• Narrow profile for easy storage when not in use
• Food safe: FDA approved and BPA-free

*Please note container does say "6 US GAL / 23L" on side of container 

Dimensions:

Length (inches): 14.8 / Width: 6.3 / Height: 19.3
Weight: 2.9 lbs.

Please note: Water tanks/jugs are not eligible for return or exchange. 

These quick connection fittings make removal of equipment and devices easy.

Four inches of 3/8 OD tubing is provided on each connector. Each kit includes one female and one male quick connect.

Easy installation into our push fittings.  Additional fittings maybe required to connect inline with components. 

How you get water to your pump is important to the functionality and longevity of your pump system.

These pick up tubes shown fit the Reliance Auqatainer 7 gallon, 4 Gallon or 7 Gallon Jumbotainer 2.0 water containers but we can create any length you might need.

The standard connection on top is a 3/8 push fitting.

The tubing that can be used for this is 3/8 OD x 1/4 ID Polyethylene or Polyurethane. We do not recommend the use of Vinyl tubing as it is not approved for drinking water use.

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A custom designed stainless steel strainer finishes off the bottle of the pick up tube and keeps larger particles from traveling into the tube. 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container. This is so that you are less likely to pull air into the system if the water is run completely dry. 

Looking for 3/8" tubing, or install kits for Espresso machines, Sinks and more 

7 Gallon Aquatainer available Separately 

----------------

Check out this quick video on the use of the pick up tube

 Looking for a Pick Up Tube for a standard 5 Gallon Water Tank

If you need a custom length please note required size in notes section during check out 

How you get water to your pump is important to the functionality and longevity of your pump system. We designed these pick up tubes as a solution for anyone looking to move water from a tank with ease.

These pick up tubes shown fit a standard 5 gallon water container/ jug but we can create any length you might need.

*The 5 Gallon Pick Up Tube comes with a blue cap on the top that fits most standard 5 gallon water bottles. Please note, the cap does not seal or create a water tight fit, it is designed to sit gently on top of the water jug to keep out debris. This cap does not fit threaded or glass bottles

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A *NEW* slim fit stainer on the end allows for an easy installation! 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container,  his is designed in an effort to keep settled debris from clogging your inlet screen

Total length of Pick Up Tube is approximately 20" - depth of pick up tube into container can be controlled by adjusting placement of lid.

Use a Reliance Brand Fresh Water Tank? Check out our Pick Up Tube for Reliance Tanks

Check out this quick video on the use of the pick up tube

If you need a custom length please note required size in notes section during check out 

We developed this water pickup tube kit as a solution to water delivery from a Scepter Water Can when connected to a water pump.

Made with 1/2” food safe poly tube. The tubing connection is 3/8 beverage tubing with quick connects for easy tank fills.

With this deign the lid stays connected to the pick up tube at all times. It cannot be removed. 

We've added foot valve and strainer to the bottom of the tube to lessen the chance of air entering the system during tank changes.

This kit will allow you to connect a Scepter Water Can to your water pump with ease.

This is the most effective solution available in a kit form.

Does not include tank

How you get water to your pump is important to the functionality and longevity of your pump system.

These pick up tubes shown fit the standard Hed Pak style 5 gallon water container. 

The standard connection on top is a 3/8 push fitting.

The tubing that can be used for this is 3/8 OD x 1/4 ID Polyethylene or Polyurethane. We do not recommend the use of Vinyl tubing as it is not approved for drinking water use.

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A custom designed stainless steel strainer finishes off the bottle of the pick up tube and keeps larger particles from traveling into the tube. 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container. This is so that you are less likely to pull air into the system if the water is run completely dry. 

Looking for 3/8" tubing, or install kits for Espresso machines, Sinks and more 

*Hedpak container not included 

----------------

Check out this quick video on the use of the pick up tube

 Looking for a Pick Up Tube for a standard 5 Gallon Water Tank

If you need a custom length please note required size in notes section during check out 

Looking to add a second fresh water pick up tube to your Hydro Connect Cube or Filtro Connect Cube? Look no further! 

The Connect Cube Pick Up Tube includes 5ft of NSF approved Surethane tubing with disconnects and a Caffewerks 7 Gal Reliance pick up tubes.

Created for those looking to connect two Caffewerks Pick Up Tubes to one Water Pump System.

Connecting two fresh water tanks to your mobile water pump system and espresso machine can have several benefits:

1. Increased Water Storage: By connecting two fresh water tanks, you effectively increase the amount of water available for your system. This is particularly useful if you anticipate needing a larger water supply for extended periods without access to a water source.

2. Extended Operation Time: Having two fresh water tanks connected to your system allows for longer operation without the need for refilling. This connection allows your pump system to pull water from both tanks simultaneously. 

3. Convenience and Efficiency: Connecting two tanks to your system can make refilling and maintenance more convenient. This setup saves time and effort, especially if you frequently need to refill the tanks.

Remember to properly configure and maintain your system, including using appropriate filters to ensure the water remains clean and suitable for use in your espresso machine.

*Pick Up Tube Not Included 

• Spout Type : Long Reach
• Height : 9"
• Reach : 5.5"
• Stud Length : 3"
• NSF/ANSI Certified : Yes

9 1/4 x 11 1/4"  / 5.25" deep

• Compact, economical and easy to install
• Available in Black
• Molded in one piece from quality ABS plastic
• Adheres to metal, wood & plastic laminations
• Cut hole in shelf or counter top and apply glue to underside of integral rim – set in place
• 9 1/4 x 11 1/4" 
• Bowl depth 5.25 inches
• Cut out size: 8" x 8" 
• Deck faucet mount 4" o.c.
  

N.S.F. Certified Under Standard 2
Accepted by Most Local Health Departments

*Does not include faucet. 

Do not cut out bench top surfaces prior to receiving sink: Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical sink on-hand prior to cutting into bench top surfaces. Caffewerks does not take responsibility for errors concerning installation and provides the sizes and dimensions as a layout guide only.  

Moli Brand Sinks are a custom order and are not eligible for return or exchange. 

18 1/4" W x 23" L Over All

Sink bowl 14 1/4" x 6 1/2"x 5 1/2"

•  Compact, economical and easy to install
• Available in Black
• Molded in one piece from quality ABS plastic
• Adheres to metal, wood & plastic laminations
• Cut hole in shelf or counter top and apply glue to underside of integral rim – set in place
• 18 1/4" x 23" o.a.
•  Sink bowl size: 14 1/4" x 6 1/2" x 5 1/2"
• Twist lock drain stopper
• 1 1/2" drains
• Includes drip rail and faucet deck
• Cut out size: 21 3/4" x 15"
  
• Deck faucet mount 4" o.c.

N.S.F. Certified Under Standard 2
Accepted by Most Local Health Departments

* Does not include faucet 

 Do not cut out bench top surfaces prior to receiving sink: Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical sink on-hand prior to cutting into bench top surfaces. Caffewerks does not take responsibility for errors concerning installation and provides the sizes and dimensions as a layout guide only.  

Moli Brand Sinks are a custom order and are not eligible for return or exchange. 

• Compact, economical and easy to install
• Available in Black
• Molded in one piece from quality ABS plastic
• Adheres to metal, wood & plastic laminations
• Cut hole in shelf or counter top and apply glue to underside of integral rim – set in place
• 18 1/4" x 23" o.a.
• Sink bowl size: 14 1/4" x 6 1/2" x 5 1/2"
• Twist lock drain stopper
• 1 1/2" drains
• Includes drip rail and faucet deck
• Faucet Model PF-4 (optional) order with 6" or 8" spout
• Cut out size: 21 3/4" x 15"
• Deck faucet mount 4" o.c.

N.S.F. Certified Under Standard 2
Accepted by Most Local Health Departments

* Does not include faucet 

Do not cut out bench top surfaces prior to receiving sink: Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical sink on-hand prior to cutting into bench top surfaces. Caffewerks does not take responsibility for errors concerning installation and provides the sizes and dimensions as a layout guide only.  

Moli Brand Sinks are a custom order and are not eligible for return or exchange. 

These quick connection fittings make removal of equipment and devices easy.

These Push Fit 3/8” x Quick Connect are made of rugged FDA approved Acetal Plastic. Each connector has a built in check valve so no water is lost during disconnected transport. Each kit includes one female and one male quick connect.

Available as individual Male and Female parts as well. 

Easy installation just like all of our push fittings.