2 products
Rhino Spinjet Spray Assembly & Actuator Plate // RHSPINSET
We BEAT any price on this as we are the manufacturer and designer.
The Rhino Caffewerks Spinjet valve sprays and spins at the same time creating a more robust mechanical cleaning action than normal rinsing valves. It is ideal for plungers using tea & coffee grounds, milk and other residues that tend to hold firm.
Suitable upgrade to most spray mechanisms and pitcher rinser spray assemblies.
Actuator star diameter: 135mm / 5.3" standard
A 123mm /4.8"Actuator star is available for retrofit purposes
Connection: External 1/2" thread, suggested install parts include CI321214S & Push Fit 3/8 Stem Elbow or our exclusive one piece elbow
The height of the rinser is 40mm above the actuator plate
Please note: If you are retro-fitting the Rhino Coffee Gear spray assembly to a current rinser with drain tray, we recommend seating the actuator plate under the drain tray to ensure full and correct action can be achieved when depressed.
Cold water use only
Great upgrade for a more efficient task!
Product helps staff perform the rinsing task with ease. Replaced units that would jam and not shut off, causing water to spray everywhere. This unit takes care of that problem!
Rhino Spinjet Spray Assembly & Actuator Plate // RHSPINSET
Rhino Spinjet Spray Assembly & Actuator Plate // RHSPINSET
Rhino Spinjet Spray Assembly & Actuator Plate // RHSPINSET
Rhino Spinjet Spray Assembly & Actuator Plate // RHSPINSET
24" x 9" Rhino® Pitcher Rinser 600mm + Spinjet with Blender Attachment // RHPR600-S-BL
This rinser kit features the standard Rhino 600mm Spinjet Pitcher Rinser with an additional Blender attachment for larger vessels and popular blender jugs such as Vitamix and Blendtec.
All Rhino Coffee Gear Rinsers are Certified by NSF International and conform to the requirements of NSF/ANSI 169 - Special Purpose Food Equipment and Devices. Click Here for documentation
The RHPR600-S-BL features the standard Rhino Spinjet Valve, which spins and sprays in a fast, sweeping action, easily removing stubborn waste from your vessel. Its low profile body is optimally sloped and angled to ensure effective removal of liquids, reducing common odours caused from static waste. The additional large actuator plate supports blender jugs and larger vessels such as plungers and milkshake cups.
This rinser kit contains:
- 1 x Rhino 600mm Spinjet Rinser (RHPR600-S) * standard or Hot valve available
- 1 x Rhino Rinser Blender Attachment (RHBRM)
* Standard SpinJet Valve for cold water use only or Hot Valve 3EDP for use with hot water, best for use with blended drinks or milks
Features:
- Single drain tray
- Rhino Spinjet Valve
- Low profile body
- Large drain outlet
- Large actuator plate
- Easy to clean
- NSF Certified
Specifications:
- Dimensions: 238mm (W) x 600mm (L) 185mm (D) approx. (Height inclusive of RHBRM Riser)
- Materials: Stainless Steel
- Drain Hose: 25mm/1mm size (not included)
-At 198mm wide (7.79"), the Rhino Blender Rinser Attachment suits the majority of blender jugs on the market.
Blender attachment Dimensions: 198mm/7.7in (W) x 100mm/3.9in (H)
Found Caffewerks while searching for our rinsers. Purchase was seamless and delivery as quick as possible. Thanks!!