All Rhino Coffee Gear Rinsers are Certified by NSF International and conform to the requirements of NSF/ANSI 169 - Special Purpose Food Equipment and Devices. Click Here for documentation.

This vessel rinser features a new honeycomb drain tray grid and a new Actuator Star design, which both help to prevent liquid retention on the working surfaces. It also includes a Rhino Spinjet Valve which sprays and spins at the same time for an effective clean. At 600mm in length, the RHPR600-S fits multiple milk pitchers and blenders pitchers comfortably, making it perfect for all busy hospitality environments.

FEATURES:

EFFECTIVE MECHANICAL CLEANING
The Spinjet Valve sprays and spins at the same time creating a more robust mechanical cleaning action than regular rinsing valves. It is ideal for press type brewers using tea leaves, stubborn coffee grounds, milk and other residues that can often be difficult to clean. 

SUPERIOR DRAINAGE
The honeycomb grate design helps increase the open space of the grid, reducing static build-up of liquids and making cleaning easy. 
The low profile body is optimally sloped to ensure effective removal of liquids, reducing common odors caused from static waste. 
A large drain outlet and wide grate-free opening near the drain creates a convenient location to quickly discard larger volumes of liquid.

LARGER VESSEL OPTIONS
The Actuator Star diameter allows both small and larger vessels to be cleaned easily.

An ideal add-on for blender jugs and other larger vessels is the Blender Adapter Kit. This kit includes an extension rod and a larger actuator to suit plungers, 
milkshake cups, and popular blender jugs such as Blendtec® and Vitamix®.

SPECIFICATIONS

- Dimensions (approx): 238mm (W) x 600mm (L) 85mm (D) approx. (9.38 x 23.6 x 3.35 in) (Depth from drain elbow to top of bench.)
- Materials: Stainless Steel
- Drain Hose: 25mm/1Inch (not included) 

-NSF Certified 

Standard Inclusions:

• 1x Sink
• 1x Spin jet spray valve (Standard or Hot)*
• 1x Hexagon grate drip tray
• 1 x John Guest Hose Adapter (drain hose not included)

* Standard SpinJet Valve for cold water use only or Hot Valve 3EDP for use with hot water, best for use with blended drinks or milks 

Depth Requirements: 
The Rhino rinsers are 1.57" deep, however, this is without fittings. We recommend at least 6" of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.

 Install and FAQ information, Click Here! 

----------

Looking for a smaller Rinser? Check out the 300mm Rinser 

Wishing it was a slightly smaller Rinser? Check out the Caffewerks Mini Rinser 

Even Smaller? We've got a 150mm Rinser too! 

----------

For best installation practices use an elbow fitting to connect water line to rinser. 

Add on:

Looking for an install kit for your Caffewerks Pump System? Click Here 

Looking for a drain hose? Click Here

Looking for the Rinser Riser? Click Here 

Click here to view the Spinjet parts diagram.

*PLEASE NOTE*
- PLV: It is recommended that a Pressure Limiting Valve (PLV) is used when installing on a mains water line.
- Do not cut out bench top surfaces prior to receiving your rinser: Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical vessel rinser on-hand prior to cutting into bench top surfaces. Bombora Supplies does not take responsibility for errors concerning installation and provides the sizes and dimensions as a layout guide only.  

Interested in wholesale pricing? Apply here  

The Rhino Coffee Gear RHPR300-S has been designed to fit in the bench of cafes, restaurants, coffee bars, and juice bars. This vessel rinser features a new honeycomb drain tray and a new Actuator Star design, which both help to prevent liquid build-up. It also includes a Rhino Spinjet Valve which sprays and spins at the same time for an effective clean. Sitting at 300mm in length, the RHPR300-S fits multiple milk pitchers comfortably, making it perfect for all busy hospitality environments.

Features: 

Better Drainage - The drain sink has a sloped surface and large 2" drain ensuring that there is no residue left behind

Bigger Vessels - The large actuator plate makes it useful across a broader range of equipment. Now you can rinse your french press and Chemex devices on your rinser!

Spinjet Spray Mechanism - The new Spinjet valve spins and sprays at the same time creating a more robust mechanical cleaning action than normal rinsing valves. It is ideal for plungers using tea & coffee grounds, milk and other residues that tend to hold firm.

NSF Certified - All Rhino Coffee Gear Milk Pitcher Rinsers are NSF Certified.

Specifications:

• Dimensions (approx): 231mm / 9.09in (W) x 354mm / 13.97in (L) 85mm / 9.34in (D) approx. (Depth from drain elbow to top of the bench.) 
• 12" x 9" 
• Materials: Stainless Steel
• Drain Hose: 25mm/1" size (not included)
• NSF Certified

Standard Inclusions:

• 1x Sink
• 1x Spin jet spray valve (Standard or Hot)*
• 1x Hexagon grate drip tray
• 1 x John Guest Hose Adapter (drain hose not included)

* Standard SpinJet Valve for cold water use only or Hot Valve 3EDP for use with hot water, best for use with blended drinks or milks 

Add on:

Looking for an install kit for your Caffewerks Pump System? Click Here 

Looking for a drain hose? Click Here

Looking for the Rinser Riser? Click Here 

 Install and FAQ information, Click Here! 

 All Rhino Coffee Gear Rinsers are Certified by NSF International and conform to the requirements of NSF/ANSI 169 - Special Purpose Food Equipment and Devices. Click Here for documentation

-------------

Looking for a larger Rinser? Check out the 600mm Rinser 

Wishing it was a slightly smaller Rinser? Check out the Caffewerks Mini Rinser 

-------------

Interested in wholesale pricing? Apply here 

For best installation practices use an elbow fitting to connect water line to rinser. 

Glass rinser, bar rinser, pitcher rinser, jug rinser, bar tools, barista tools, espresso, coffee, cocktail, beer, bartender tools

ESPRESSO PARTS, NSF APPROVED, BAR AND CAFE RINSER, - SIZE 7" X 15"

 The Caffewerks Mini Pitcher Rinser is an innovative and efficient tool designed to enhance the coffee-making experience. This compact device incorporates advanced features such as the Spinjet Valve and a sloped sink for faster drainage, ensuring optimal performance and convenience.

The Spinjet Valve is a key component of the Mini Pitcher Rinser, specifically engineered to provide powerful and precise rinsing action. When activated, the Spinjet Valve creates a high-pressure water stream that rotates within the rinser, thoroughly cleaning and rinsing the pitcher or other coffee tools placed inside. This unique mechanism ensures thorough removal of coffee residues and helps maintain impeccable hygiene standards.

The sloped sink feature is another notable aspect of the Caffewerks Mini Pitcher Rinser. The sink is intentionally designed with a slight slope to facilitate faster drainage. This means that after the rinsing process, water quickly flows out of the sink, via the  low profile 1 1/4 strainer, preventing any pooling or stagnant water. 

The Mini Pitcher Rinser itself is compact and space-saving, 5" x 9" /140mm x 230mm making it ideal for both home and commercial coffee setups. Its small footprint allows it to be conveniently placed on countertops, espresso machine drip trays, or any other designated space without occupying excessive room. Despite its compact size, the Mini Pitcher Rinser delivers exceptional performance and durability, ensuring reliable and efficient rinsing for extended periods.

The Caffewerks Mini Pitcher Rinser with the Spinjet Valve is a game-changer in the coffee industry. It combines the power of a high-pressure water stream with a clever drainage design, resulting in an efficient rinsing process. Whether used by home baristas, coffee enthusiasts, or in commercial settings, this innovative tool streamlines the coffee preparation process and maintains optimal cleanliness standards.

 * Standard SpinJet Valve for cold water use only or Hot Valve 3EDP for use with hot water, best for use with blended drinks or milks 

Dimensions: 5" x 9" / 140mm x 230mm

Weight: 3 lbs

Looking for an install kit for your Caffewerks Pump System? Click Here 

Looking for a drain hose? Click Here

Depth Requirements: 
The Caffewerks Mini Rinser is 3.5" deep, however, this is without fittings. We recommend at least 6" of clearance under the counter for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply.

Note:

For best installation practices use an elbow fitting to connect water line to rinser.

 We recommend the use of a 30 PSI Pressure regulator.

Click here to view the Spinjet parts diagram.

Cut Dimensions are not provided via email. It is suggested that you wait until you have the physical product. Caffe Werks LLC. is not responsible for cutout data. 

---------

Wishing it was a slightly larger Rinser? Check out the 300mm Rinser 

Thinking of something even larger? Check out the 600mm Rinser 

The Rhino Coffee Gear RHPR150-S has been designed to fit in the bench of cafes, coffee bars, and other hospitality environments. This vessel rinser features a new actuator star design and a Rhino Spinjet Valve which sprays and spins at the same time for an effective clean. Sitting at 150mm in length, the RHPR150-S is the most compact pitcher rinser in the Rhino range and is the perfect option for smaller cafes and coffee bars.

We BEAT any price on this as we are the manufacturer and designer.

• Rhino Coffee Gear Spinjet Spray Assembly with actuator plate.
• Suitable upgrade to most spray mechanisms and pitcher rinser spray assemblies
• Certifications: NSF, CSA, CalGreen Compliant, Massachusetts State Plumbing Board approved
• Coldwater use only
• Check out this conversion video

The Rhino Caffewerks Spinjet valve sprays and spins at the same time creating a more robust mechanical cleaning action than normal rinsing valves. It is ideal for plungers using tea & coffee grounds, milk and other residues that tend to hold firm.

Suitable upgrade to most spray mechanisms and pitcher rinser spray assemblies.

Actuator star diameter: 135mm / 5.3" standard

A 123mm /4.8"Actuator star is available for retrofit purposes

Connection: External 1/2" thread, suggested install parts include  CI321214S & Push Fit 3/8 Stem Elbow or our exclusive one piece elbow

The height of the rinser is 40mm above the actuator plate

Please note: If you are retro-fitting the Rhino Coffee Gear spray assembly to a current rinser with drain tray, we recommend seating the actuator plate under the drain tray to ensure full and correct action can be achieved when depressed.


Cold water use only

 Install, Spec and FAQ information, Click Here! 

Rhino Spinjet HOT Spray Assembly & Actuator Star // 3-EDP

This rinser kit features the standard Rhino 600mm Spinjet Pitcher Rinser with an additional Blender attachment for larger vessels and popular blender jugs such as Vitamix and Blendtec.

All Rhino Coffee Gear Rinsers are Certified by NSF International and conform to the requirements of NSF/ANSI 169 - Special Purpose Food Equipment and Devices. Click Here for documentation

The RHPR600-S-BL features the standard Rhino Spinjet Valve, which spins and sprays in a fast, sweeping action, easily removing stubborn waste from your vessel. Its low profile body is optimally sloped and angled to ensure effective removal of liquids, reducing common odours caused from static waste. The additional large actuator plate supports blender jugs and larger vessels such as plungers and milkshake cups.

This rinser kit contains:
- 1 x Rhino 600mm Spinjet Rinser (RHPR600-S)  * standard or Hot valve available 
- 1 x Rhino Rinser Blender Attachment (RHBRM)

* Standard SpinJet Valve for cold water use only or Hot Valve 3EDP for use with hot water, best for use with blended drinks or milks 


Features:
- Single drain tray
- Rhino Spinjet Valve
- Low profile body
- Large drain outlet
- Large actuator plate
- Easy to clean
- NSF Certified

Specifications:
- Dimensions: 238mm (W) x 600mm (L) 185mm (D) approx. (Height inclusive of RHBRM Riser)
- Materials: Stainless Steel
- Drain Hose: 25mm/1mm size (not included) 

-At 198mm wide (7.79"), the Rhino Blender Rinser Attachment suits the majority of blender jugs on the market.

Blender attachment Dimensions: 198mm/7.7in (W) x 100mm/3.9in (H)

 Install and FAQ information, Click Here! 

This rinser kit features the standard Rhino 300mm Vessel Rinser, with an additional Blender Attachment for larger vessels and popular blender jugs such as Vitamix and Blendtec.

The RHPR300-BL also features the Rhino Spinjet Valve, which spins and sprays in a fast, sweeping action, easily removing stubborn waste from your vessel. Its low profile body is optimally sloped and angled to ensure effective removal of liquids, reducing common odours caused from static waste. The large actuator plate supports blender jugs and larger vessels such as plungers and milkshake cups.

This rinser kit contains:
- 1 x Rhino 300mm Spinjet Rinser (RHPR300-S) * standard or Hot valve available 

- 1 x Rhino Rinser Blender Attachment (RHBRM)

* Standard SpinJet Valve for cold water use only or Hot Valve 3EDP for use with hot water, best for use with blended drinks or milks 

Features:
- Rhino Spinjet Valve
- Low profile body
- Large actuator plate
- Easy to clean
- NSF Certified

Specifications:
- Dimensions: 231mm (W) x 354mm (L) 185mm (D) approx. (9.09 x 13.94 x 7.23 in) Height inclusive of Riser. 
- Materials: Stainless Steel
- Drain Hose: 25mm/1mm size (not included) 

-At 198mm wide (7.79"), the Rhino Blender Rinser Attachment suits the majority of blender jugs on the market.

 Install and FAQ information, Click Here! 

Depth Requirements: 

The Rhino rinsers are 1.57" deep, however, this is without fittings. We recommend at least 6" of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.  

Please Note - It is recommended that a Pressure Limiting Valve (PLV) is used when installing on a mains water line.

The Rhino Pitcher Rinser Riser RHRISER300-BK in Black suits the Rhino Coffee Gear 300mm Pitcher Rinser. These risers have been designed to allow a simple installation without the need for a professional shop fitter to cut specific dimensions into the bench. Instead, the riser lifts the sink above the bench, enabling a smaller hole to be cut into the benchtop to supply water and drainage.

Features:

• Allows for a smaller supply line access hole to be cut into the bench.
• Removes the need for a large, exact cut-out to fit specific rinser dimensions.
• Shallow profile design reduces visual clutter on the benchtop and doesn't disrupt workflow.
• Allows for an easy upgrade from the RHPR150-S to the RHPR300 without any more cutting into your bench.

Specifications:

• Material: Powder-coated stainless steel
• Colour: Black
• Dimensions: 354mm (13.94in) L x 232mm (9.13in) W x 45mm (1.77in) H

Upgrade Your Existing Rinser with the RHRISER-300-BK:

Are you looking to upgrade your existing RHPR150-S or similar low footprint rinser but don’t want the headache of hiring an installer to cut into your benchtops again? Rhino’s new RHRISER300-BK allows you to make a quick and easy upgrade, enabling you to utilise our larger Rhino RHPR300-S Pitcher Rinser. What advantages can I expect from utilising The Rhino Pitcher Rinser 300mm?

•  Rhino’s award-winning Spinjet Spray Valve which reduces water usage by up to 50% and cleans 2 x faster than other valves in the market. The Spinjet Valve sprays and spins at the same time creating a superior mechanical cleaning action compared to regular rinsing valves.
•  A honeycomb grate design which minimises the surface area of the drain tray, reducing the static build-up of liquids and making cleaning easy.
• The Actuator Star diameter and design allows both small and large volume vessels to be cleaned with ease.
• A low profile body which is optimally sloped and angled to ensure effective removal of liquids, reducing common odours caused by static waste.
• The RHPR300-S features a spacious drainage grate, that is able to store roughly 4 milk jugs at once.
• A large drain outlet and a wide grate-free opening near the drain which creates a convenient location to quickly discard larger volumes of liquid.

Designed by and built by Caffewerks, the Connect Cube line of mobile water, filtration and power distribution equipment will change the way you think about water supply systems.

The Portable Rinser Connect Cube is designed to work along side our full line of Connect Cubes, or individually on its own. The perfect size for your counter, table or cart. It can also sit squarely on top of the Caffewerks High Volume Hydro Connect Cube. 

The Connect Cube Portable Rinser Connect Cube uses a 1.7 Gallons Per Minute water pump making sure you always have enough water ready to go. The Portable Rinser is built inside a custom, easy to carry, durable HDPE stackable case. One quick connect inlet, and one drain line is located on the outside of the case, but still protected from any bumps or jostling.

Our unique stacking design saves space and the built in handle make them easy to transport. 

Includes: 

300mm Spin Jet Rinser 

Built in Caffewerks Pump and Accumulator System

Drain Hose 

Fresh Water Pick Up Tube for 7 gallon Aquatainer

Quick Connect Water Line 

HDPE Carry Case / Stackable Connect Cube

*optional Water Faucet 

Dimensions: 

12" Wide 

18"   Deep  

6"   Tall 

Weight: 

13lb

A few reasons why the Caffewerks Portable Rinser // Connect Cube is an excellent choice for mobile coffee businesses

1. Portability: As a mobile coffee business, you need equipment that is compact, lightweight, and easy to transport. The Portable Rinser Connect Cube is designed with portability in mind. It features a compact and self-contained design that allows you to bring it wherever your business takes you. Whether you're operating out of a food truck, a pop-up café, or catering events, the cube's portability ensures that you can effortlessly set up and provide efficient rinsing capabilities on the go.

2 Versatility: The Portable Rinser Connect Cube is incredibly versatile, accommodating various barware and utensils used in a mobile coffee business. It is equipped with a rinser platform and a powerful rinsing nozzles, enabling you to rinse cups, glasses, pitchers, and other items quickly and thoroughly.

3. Water Conservation: Mobile coffee businesses often face water resource constraints, especially in outdoor or remote locations. The Portable Rinser Connect Cube is designed to minimize water usage while maintaining effective rinsing capabilities.

The Caffewerks Portable Rinser // Connect Cube offers unparalleled convenience, versatility, and efficiency for mobile coffee businesses. Its portability, ease of installation, water conservation features, and durable construction make it the ideal choice for those who value mobility, functionality, and quality in their rinsing equipment. With the cube by your side, you can provide excellent rinsing capabilities on the go, ensuring a seamless and professional coffee experience for your customers.

If you need assistance Click here for our water pump consulting services starting at 55.00  

 *Each Water Pump System is built to order. Please allow 10-15 days for order processing prior to shipping*