The Rhino Coffee Gear RHPR600-S has been designed to fit in the counter of cafes, restaurants, espresso bars, juice and cocktail bars.
All Rhino Coffee Gear Rinsers are Certified by NSF International and conform to the requirements of NSF/ANSI 169 - Special Purpose Food Equipment and Devices. Click Here for documentation.
This vessel rinser features a new honeycomb drain tray grid and a new Actuator Star design, which both help to prevent liquid retention on the working surfaces. It also includes a Rhino Spinjet Valve which sprays and spins at the same time for an effective clean. At 600mm in length, the RHPR600-S fits multiple milk pitchers and blenders pitchers comfortably, making it perfect for all busy hospitality environments.
FEATURES:
EFFECTIVE MECHANICAL CLEANING The Spinjet Valve sprays and spins at the same time creating a more robust mechanical cleaning action than regular rinsing valves. It is ideal for press type brewers using tea leaves, stubborn coffee grounds, milk and other residues that can often be difficult to clean.
SUPERIOR DRAINAGE The honeycomb grate design helps increase the open space of the grid, reducing static build-up of liquids and making cleaning easy. The low profile body is optimally sloped to ensure effective removal of liquids, reducing common odors caused from static waste. A large drain outlet and wide grate-free opening near the drain creates a convenient location to quickly discard larger volumes of liquid.
LARGER VESSEL OPTIONS The Actuator Star diameter allows both small and larger vessels to be cleaned easily.
An ideal add-on for blender jugs and other larger vessels is the Blender Adapter Kit. This kit includes an extension rod and a larger actuator to suit plungers, milkshake cups, and popular blender jugs such as Blendtec® and Vitamix®.
SPECIFICATIONS
- Dimensions (approx): 238mm (W) x 600mm (L) 85mm (D) approx. (9.38 x 23.6 x 3.35 in) (Depth from drain elbow to top of bench.) - Materials: Stainless Steel - Drain Hose: 25mm/1Inch (not included)
-NSF Certified
Standard Inclusions:
1x Sink
1x Spin jet spray valve (Standard or Hot)*
1x Hexagon grate drip tray
1 x John Guest Hose Adapter (drain hose not included)
* Standard SpinJet Valve for cold water use only or Hot Valve 3EDP for use with hot water, best for use with blended drinks or milks
Depth Requirements: The Rhino rinsers are 1.57" deep, however, this is without fittings. We recommend at least 6" of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.
*PLEASE NOTE* -PLV: It is recommended that a Pressure Limiting Valve (PLV) is used when installing on a mains water line. -Do not cut out bench top surfaces prior to receiving your rinser: Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical vessel rinser on-hand prior to cutting into bench top surfaces. Bombora Supplies does not take responsibility for errors concerning installation and provides the sizes and dimensions as a layout guide only.
Rhino Coffee Gear has reimagined the tried and tested Spinjet valve system to meet the changing needs of the industry. With an all-new extended stainless steel body, coupled with CNC-milled Delrin, and robust seal components, the RH3PE valve provides customers with the ability to use the valve in HOT water applications (Up to 55 degrees Celsius / 131 Degrees Fahrenheit).
Cleaning and maintaining your beverage pitchers properly is a multi-step process. Regular rinsing of these implements throughout the day is key to removing unwanted solids that can cause cross-contamination in your finished product, and lessen the life of the tools you used to produce them. The existing technology in Rhino’s patented Spinjet technology utilises water pressure to channel flow into the cleaning jets, creating a fast rotating motion. This rotating movement creates a superior cleaning action that rinses matter away from the surface from multiple angles.
How do you improve a fantastic cleaning action when chemicals are not practical? We add temperature. Warm water assists in making a large number of contaminants more soluble which in turn, makes them easier to remove from a surface.
Suitable for the cleaning of beverage implements used in making fruit juices, non-dairy-based smoothies, and alcoholic, and non-alcoholic cocktails.
Product Specifications:
Dimensions (approximate): 140 mm (Length total) - 60 mm (Length above sink) - 85mm (Length below sink).
Materials: Stainless Steel body, Delrin Spinjet.
Inlet thread size : ½: BSP Male thread
Certifications:
The RH3PE-SPINSET valve is NSF certified to standard ASME 1812.19.13 / CSA B45.4 2017, when installed in conjunction with a sink that meets regulatory standards. Installation Information:
Depth Requirements: The Rhino rinsers are 40mm deep, however, this is without fittings. We recommend at least 150mm of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.
It is recommended that the RH3PE-SPINSET is installed in conjunction with a 350 kpa / 50 psi PLV.
It is also recommended that the RH3PE-SPINSET is installed in conjunction with a Tempering valve set at no greater than 55 Degrees Celsius / 131 Degrees Fahrenheit.
The Rhino Pitcher Rinser Riser RHRISER300-BK in Black suits the Rhino Coffee Gear 300mm Pitcher Rinser. These risers have been designed to allow a simple installation without the need for a professional shop fitter to cut specific dimensions into the bench. Instead, the riser lifts the sink above the bench, enabling a smaller hole to be cut into the benchtop to supply water and drainage.
Features:
Allows for a smaller supply line access hole to be cut into the bench.
Removes the need for a large, exact cut-out to fit specific rinser dimensions.
Shallow profile design reduces visual clutter on the benchtop and doesn't disrupt workflow.
Allows for an easy upgrade from the RHPR150-S to the RHPR300 without any more cutting into your bench.
Specifications:
Material: Powder-coated stainless steel
Colour: Black
Dimensions: 354mm (13.94in) L x 232mm (9.13in) W x 45mm (1.77in) H
Upgrade Your Existing Rinser with the RHRISER-300-BK:
Are you looking to upgrade your existing RHPR150-S or similar low footprint rinser but don’t want the headache of hiring an installer to cut into your benchtops again? Rhino’s new RHRISER300-BK allows you to make a quick and easy upgrade, enabling you to utilise our larger Rhino RHPR300-S Pitcher Rinser. What advantages can I expect from utilising The Rhino Pitcher Rinser 300mm?
Rhino’s award-winning Spinjet Spray Valve which reduces water usage by up to 50% and cleans 2 x faster than other valves in the market. The Spinjet Valve sprays and spins at the same time creating a superior mechanical cleaning action compared to regular rinsing valves.
A honeycomb grate design which minimises the surface area of the drain tray, reducing the static build-up of liquids and making cleaning easy.
The Actuator Star diameter and design allows both small and large volume vessels to be cleaned with ease.
A low profile body which is optimally sloped and angled to ensure effective removal of liquids, reducing common odours caused by static waste.
The RHPR300-S features a spacious drainage grate, that is able to store roughly 4 milk jugs at once.
A large drain outlet and a wide grate-free opening near the drain which creates a convenient location to quickly discard larger volumes of liquid.