3 products
24" x 9" Rhino® Pitcher Rinser 600mm + Spinjet // RHPR600-S
All Rhino Coffee Gear Rinsers are Certified by NSF International and conform to the requirements of NSF/ANSI 169 - Special Purpose Food Equipment and Devices. Click Here for documentation.
This vessel rinser features a new honeycomb drain tray grid and a new Actuator Star design, which both help to prevent liquid retention on the working surfaces. It also includes a Rhino Spinjet Valve which sprays and spins at the same time for an effective clean. At 600mm in length, the RHPR600-S fits multiple milk pitchers and blenders pitchers comfortably, making it perfect for all busy hospitality environments.
FEATURES:
EFFECTIVE MECHANICAL CLEANING
The Spinjet Valve sprays and spins at the same time creating a more robust mechanical cleaning action than regular rinsing valves. It is ideal for press type brewers using tea leaves, stubborn coffee grounds, milk and other residues that can often be difficult to clean.
SUPERIOR DRAINAGE
The honeycomb grate design helps increase the open space of the grid, reducing static build-up of liquids and making cleaning easy.
The low profile body is optimally sloped to ensure effective removal of liquids, reducing common odors caused from static waste.
A large drain outlet and wide grate-free opening near the drain creates a convenient location to quickly discard larger volumes of liquid.
LARGER VESSEL OPTIONS
The Actuator Star diameter allows both small and larger vessels to be cleaned easily.
An ideal add-on for blender jugs and other larger vessels is the Blender Adapter Kit. This kit includes an extension rod and a larger actuator to suit plungers,
milkshake cups, and popular blender jugs such as Blendtec® and Vitamix®.
SPECIFICATIONS
- Dimensions (approx): 238mm (W) x 600mm (L) 85mm (D) approx. (9.38 x 23.6 x 3.35 in) (Depth from drain elbow to top of bench.)
- Materials: Stainless Steel
- Drain Hose: 25mm/1Inch (not included)
-NSF Certified
Standard Inclusions:
* Standard SpinJet Valve for cold water use only or Hot Valve 3EDP for use with hot water, best for use with blended drinks or milks
Depth Requirements:
The Rhino rinsers are 1.57" deep, however, this is without fittings. We recommend at least 6" of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.
----------
Looking for a smaller Rinser? Check out the 300mm Rinser
Wishing it was a slightly smaller Rinser? Check out the Caffewerks Mini Rinser
Even Smaller? We've got a 150mm Rinser too!
----------
For best installation practices use an elbow fitting to connect water line to rinser.
Add on:
Looking for an install kit for your Caffewerks Pump System? Click Here
Looking for a drain hose? Click Here
Looking for the Rinser Riser? Click Here
Click here to view the Spinjet parts diagram.
*PLEASE NOTE*
- PLV: It is recommended that a Pressure Limiting Valve (PLV) is used when installing on a mains water line.
- Do not cut out bench top surfaces prior to receiving your rinser: Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical vessel rinser on-hand prior to cutting into bench top surfaces. Bombora Supplies does not take responsibility for errors concerning installation and provides the sizes and dimensions as a layout guide only.
Interested in wholesale pricing? Apply here
Amazing company. Ships freaky fast!
The pitcher rinser has definitely up our work flow and looks great on the counter top!
Thanks again!
12" x 9" Rhino® Pitcher Rinser 300mm + Spinjet // RHPR300-S
The Rhino Coffee Gear RHPR300-S has been designed to fit in the bench of cafes, restaurants, coffee bars, and juice bars. This vessel rinser features a new honeycomb drain tray and a new Actuator Star design, which both help to prevent liquid build-up. It also includes a Rhino Spinjet Valve which sprays and spins at the same time for an effective clean. Sitting at 300mm in length, the RHPR300-S fits multiple milk pitchers comfortably, making it perfect for all busy hospitality environments.
Features:
Better Drainage - The drain sink has a sloped surface and large 2" drain ensuring that there is no residue left behind
Bigger Vessels - The large actuator plate makes it useful across a broader range of equipment. Now you can rinse your french press and Chemex devices on your rinser!
Spinjet Spray Mechanism - The new Spinjet valve spins and sprays at the same time creating a more robust mechanical cleaning action than normal rinsing valves. It is ideal for plungers using tea & coffee grounds, milk and other residues that tend to hold firm.
NSF Certified - All Rhino Coffee Gear Milk Pitcher Rinsers are NSF Certified.
Specifications:
Standard Inclusions:
* Standard SpinJet Valve for cold water use only or Hot Valve 3EDP for use with hot water, best for use with blended drinks or milks
Add on:
Looking for an install kit for your Caffewerks Pump System? Click Here
Looking for a drain hose? Click Here
Looking for the Rinser Riser? Click Here
All Rhino Coffee Gear Rinsers are Certified by NSF International and conform to the requirements of NSF/ANSI 169 - Special Purpose Food Equipment and Devices. Click Here for documentation
-------------
Looking for a larger Rinser? Check out the 600mm Rinser
Wishing it was a slightly smaller Rinser? Check out the Caffewerks Mini Rinser
-------------
Interested in wholesale pricing? Apply here
For best installation practices use an elbow fitting to connect water line to rinser.
Glass rinser, bar rinser, pitcher rinser, jug rinser, bar tools, barista tools, espresso, coffee, cocktail, beer, bartender tools
ESPRESSO PARTS, NSF APPROVED, BAR AND CAFE RINSER, - SIZE 7" X 15"
Easy to install
6" x 6" Rhino Square Pitcher Rinser 150mm + Spinjet // RHPR150-S
The Rhino Coffee Gear RHPR150-S has been designed to fit in the bench of cafes, coffee bars, and other hospitality environments. This vessel rinser features a new actuator star design and a Rhino Spinjet Valve which sprays and spins at the same time for an effective clean. Sitting at 150mm in length, the RHPR150-S is the most compact pitcher rinser in the Rhino range and is the perfect option for smaller cafes and coffee bars.
Features:
- The Spinjet Valve sprays and spins at the same time creating a more robust mechanical cleaning action than regular rinsing valves. It is ideal for plungers using tea leaves, stubborn coffee grounds, and milk and other residues that can often be difficult to clean.
- Compact design is perfect for smaller bench spaces.
- Easy installation.
- Actuator Star design helps to prevent the build up of milk residue and is easy to clean.
- 304 Stainless Steel construction.
- No sharp edges; corners are rounded for safety.
- NSF Certified
Specifications:
- Dimensions: 175mm (W) x 159mm (L) x 62mm (D) approx. (Depth with fittings: 110mm)
- Materials: Stainless Steel
- Drain Hose: 25mm/1" size
- Flow Rate: 120 lph approx.
Standard Inclusions:
- 1 x Sink
- 1 x Spinjet Spray Mechanism with 123 mm stainless steel activation star (Standard or Hot)*
- 1 x John Guest Hose Adapter
- 1 x Drain Outlet
* Standard SpinJet Valve for cold water use only or Hot Valve 3EDP for use with hot water, best for use with blended drinks or milks
Depth Requirements:
We recommend at least 150mm of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.
All Rhino Milk Pitcher Rinsers are NSF Certified.
Installation Notes:
- Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical pitcher rinser on hand prior to cutting into bench top surfaces. Bombora does not take responsibility for installation cut out error and provides the sizes and dimensions as a layout guide only.
- It is recommended that a Pressure Limiting Valve (PLV - also known as a Pressure Restricting Valve or Water Pressure Regulator) is used when installing on mains water line.
Add on:
Looking for an install kit for your Caffewerks Pump System? Click Here
Looking for a drain hose? Click Here
Downloads & Links:
I love it!!! It is perfect for my needs and even fun to use.
n/a
Quick and exceptional service
I am building my coffee cart and this pitcher rinser is perfect! Thank you Caffeewerks for having these available while I’m buying other stuff as well.