How you get water to your pump is important to the functionality and longevity of your pump system.

These pick up tubes shown fit the Reliance Auqatainer 7 gallon, 4 Gallon or 7 Gallon Jumbotainer 2.0 water containers but we can create any length you might need.

The standard connection on top is a 3/8 push fitting.

The tubing that can be used for this is 3/8 OD x 1/4 ID Polyethylene or Polyurethane. We do not recommend the use of Vinyl tubing as it is not approved for drinking water use.

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A custom designed stainless steel strainer finishes off the bottle of the pick up tube and keeps larger particles from traveling into the tube. 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container. This is so that you are less likely to pull air into the system if the water is run completely dry. 

Looking for 3/8" tubing, or install kits for Espresso machines, Sinks and more 

7 Gallon Aquatainer available Separately 

----------------

Check out this quick video on the use of the pick up tube

 Looking for a Pick Up Tube for a standard 5 Gallon Water Tank

If you need a custom length please note required size in notes section during check out 

How you get water to your pump is important to the functionality and longevity of your pump system. We designed these pick up tubes as a solution for anyone looking to move water from a tank with ease.

These pick up tubes shown fit a standard 5 gallon water container/ jug but we can create any length you might need.

*The 5 Gallon Pick Up Tube comes with a blue cap on the top that fits most standard 5 gallon water bottles. Please note, the cap does not seal or create a water tight fit, it is designed to sit gently on top of the water jug to keep out debris. This cap does not fit threaded or glass bottles

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A *NEW* slim fit stainer on the end allows for an easy installation! 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container,  his is designed in an effort to keep settled debris from clogging your inlet screen

Total length of Pick Up Tube is approximately 20" - depth of pick up tube into container can be controlled by adjusting placement of lid.

Use a Reliance Brand Fresh Water Tank? Check out our Pick Up Tube for Reliance Tanks

Check out this quick video on the use of the pick up tube

If you need a custom length please note required size in notes section during check out 

We developed this water pickup tube kit as a solution to water delivery from a Scepter Water Can when connected to a water pump.

Made with 1/2” food safe poly tube. The tubing connection is 3/8 beverage tubing with quick connects for easy tank fills.

With this deign the lid stays connected to the pick up tube at all times. It cannot be removed. 

We've added foot valve and strainer to the bottom of the tube to lessen the chance of air entering the system during tank changes.

This kit will allow you to connect a Scepter Water Can to your water pump with ease.

This is the most effective solution available in a kit form.

Does not include tank

• Crafted from food-grade LDPE and HDPE plastic, this 5-gallon water jug container for drinking ensures that the water you carry remains uncontaminated and safe to drink
• Durable water storage jug 5-gallon container that boasts a 5-gallon/20-liter capacity, ensuring you have access to safe and clean drinking water during your upcoming activities
• Minimum wall thickness of this 5-gallon water jug container is 0.10 inches (2.5 mm), which ensures durability and longevity; Filling water is easy because of the container's small spout or spigot
• Have clean water with you wherever your next outdoor adventure takes you with Scepter's lightweight 5-gallon water cooler jug portable water storage container
• Sleek tan color with dimensions measuring (L x W x H)13.7 x 6.8 x 18.8 inches and a weight of 4.33 pounds, this water jug storage container is not only functional but also aesthetically pleasing

*Please note: Air vent should be open while in use

Please note: Water tanks/jugs are not eligible for return or exchange. 

• Rigid, 7-gallon /  26.5 liter rectangular water container with molded contour grip
• Made with BPA free HDPE Plastic
• Space-saving design for easy storing and stacking when empty
• New and improved screw-on vent; hideaway spigot for on-demand water dispensing
• Suitable for outdoors activities and emergency water storage
• NOTE: Prolonged exposure to direct sunlight will cause the water container to degrade and become brittle, increasing the chance of leaks. It is highly recommended to store water containers in cool shaded areas.
• Five-year warranty against manufacturer's defects
• Measurements are 11.5 x 12 x 16 inches
• 
  
  2lbs 

Please note: Water tanks/jugs are not eligible for return or exchange. 

• Works seamlessly with all Caffewerks water pump systems using our CPC quick connects.
• At 3 gallons of volume the tanks are lighter to carry and they fit very well in cart configurations.

• Perfect for use in mobile food service, including food trucks and mobile carts, Home espresso machine installs, and anywhere else you need portable water containers.
• Volume-maximizing design — while many water containers contain 10L, ours goes to 11. 
  
• Multiple dispensing options built in, including two openings for easy filling, dispensing, and cleaning.
• Use these for camping too! Designed to be easy to carry from car to campsite and fits in the space behind your vehicle’s wheel well.
• Comfortable, removable webbed carry handles, built-in tiedown guides.
• Spigot and quick-connect fitting for accessory attachment included.
• Constructed from BPA-free, food-grade LDPE.

Consists of:
1 x Hydration Water Jug 11L / 2.9 Gal

Product Dimensions:
254mm (10") L x 178mm (7.01") W x 369mm (14.53") H

Weight:
1.75kg (3.86lbs)

Operating Instructions

Please note: Water tanks/jugs are not eligible for return or exchange. 

These quick connection fittings make removal of equipment and devices easy.

Four inches of 3/8 OD tubing is provided on each connector. Each kit includes one female and one male quick connect.

Easy installation into our push fittings.  Additional fittings maybe required to connect inline with components. 

Filtro Azul

Adding UV-C LED water purification to your build is as easy as installing the Filtro Azul device before the point of use.

• Flow rates up to 8 LPM 
• Higher flow rates can be addressed with multiple units in parallel 
• Disinfection performance third party validated
• Self-contained in one unit (reactor, light source, ballast, and controls)
• State of the art UV-C LEDs with lamp life up to 10,000 hours
• Highly configurable with water and electrical connections, cooling, and UV-C output power

Have total confidence in the water quality for your family, eliminating up to 99.9999% of bacteria and viruses. When used with our 5" Carbon Block Prefilter, the system also provides for removal of:

• Reduced chlorine, taste and odor
• Effective filtering of cryptosporidium and 
• giardia cysts
• High capacity chlorine reduction
• Nominal 0.5 micron rating

Maintenance-free

Very low maintenance requirements & operates on-demand –only when water is flowing.

Low power consumption. The system is activated only when water is flowing, reducing power consumption by 90% compared to traditional other systems.

12v power source required.

Pressurized water required.

Omnipure K Series Inline Filters - GAC/Scale Reduction -  K2586KK

2"x10"-3/8" Quick-Connect GAC/Polyphosphate Filter

A simple solution for inline filtration running to your espresso machine or water tap. 3/8"Push Fit fittings compatible with all Caffewerks Water Pump Systems.

Documents for Item 

Specification Sheets

• For Compliance with Prop 65 Arsenic: Flush all carbon filters at the rated flow rate for 5+ minutes prior to using water from filter.

If backordered, estimated lead time is: 2-3 Weeks

Filtro UV-C + Carbon

Adding UV-C LED water purification to your build is as easy as installing the Filtro UV-C + Carbon System before the point of use.

UV-C LED and Carbon Block pre-filter combined for the perfect addition to your water pump system

• Flow rates up to 8 LPM 
• Higher flow rates can be addressed with multiple units in parallel 
• Disinfection performance third party validated
• Self-contained in one unit (reactor, light source, ballast, and controls)
• State of the art UV-C LEDs with lamp life up to 10,000 hours
• Highly configurable with water and electrical connections, cooling, and UV-C output power

Have total confidence in the water quality for your family, eliminating up to 99.9999% of bacteria and viruses. The 5" Carbon Block Pre-filter also provides for removal of:

• Reduced chlorine, taste and odor
• Effective filtering of cryptosporidium and 
• giardia cysts
• High capacity chlorine reduction
• Nominal 0.5 micron rating

Pre Mounted to a HDPE plastic mounting panel. Predrilled and ready for installation

Maintenance-free

Very low maintenance requirements & operates on-demand –only when water is flowing.

Low power consumption. The system is activated only when water is flowing, reducing power consumption by 90% compared to traditional other systems.

Dimensions

10.5w x 9.5t x 5.5 d

Weight

8 Lbs

12v power source required.

Pressurized water required.

Using a Caffewerks Dual Stage Water Filter System on an espresso machine can have several benefits:

1. Improved taste: Water filters can remove impurities such as chlorine, sediment, and minerals that can affect the taste of your espresso. By removing these impurities, the water used to make your espresso will taste cleaner and less harsh.

2. Increased lifespan of the machine: Minerals in hard water can build up and damage the internal components of an espresso machine over time. Using a water filter can reduce the mineral buildup and extend the lifespan of your machine.

3. Better performance: By reducing mineral buildup, a water filter can help maintain the optimal water pressure and temperature for making espresso. This can result in a more consistent and better-quality espresso.

4. Easier maintenance: A water filter can help reduce the amount of maintenance required for your espresso machine. By reducing mineral buildup, you may need to descale your machine less frequently.

Overall, using a water filter on your espresso machine can improve the taste and quality of your espresso, extend the lifespan of your machine, and reduce the amount of maintenance required.

Coffee is 98% water and filtration is the best way to protect your espresso equipment, and clean water is also the best way to keep your coffee tasting great. 

The Caffewerks Dual Panel is a sediment pre-filter to ensure that the secondary carbon block filter will last longer. 

1. The first filter is a High Efficiency 2-1/2" Polypropylene Sediment Depth Filter, which is a reliable and economical solution for pre-filtration in many applications. The 2-1/2" sediment depth filter offers greater surface area for longer life and greater dirt holding capacity. The filters are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.

2. The Second filter is a carbon block cartridge that is highly effective at reducing chlorine taste and odor from potable drinking water. The unique structure of the carbon block enables it to reduce giardia, cryptosporidium and other cysts and fine sediment particles down to 0.5 microns. The filter is manufactured entirely from  FDA-compliant materials. NSF and FDA Approved.

Features:

• Reduces chlorine, taste and odor
• Effective at filtering cryptosporidium and 
• giardia cysts
• High capacity chlorine reduction
• Nominal 0.5 micron rating
• Made entirely of FDA-approved materials
• Ideal choice for a wide range of residential, food service, commercial and industrial applications

Best Practice is to replace the filters twice a year, about every 6 months.

Replacment fitlers can be found here  

Dimensions: 

10.5” Wide 

4.5”   Deep 

9”   Tall 

Weight: 

6.5 LBS

 *Color of filter cap may vary*

Water Filter Spec Sheets 

Filter Replacement Guide 

 *Each Water Pump System is built to order. Please allow 10-15 days for order processing prior to shipping*

Replacement Filters for Caffewerks Connect Cube Filtro 

Pre Sediment Filter:

This is aHigh Efficiency 2-1/2" Polypropylene Sediment Depth Filter, which is a reliable and economical solution for pre-filtration in many applications. The 2-1/2" sediment depth filter offers greater surface area for longer life and greater dirt holding capacity. The filters are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.

Carbon Block Filter:

The Carbon Block cartridge that is highly effective at reducing chlorine taste and odor from potable drinking water. The unique structure of the carbon block enables it to reduce giardia, cryptosporidium and other cysts and fine sediment particles down to 0.5 microns. The filter is manufactured entirely from  FDA-compliant materials. NSF and FDA Approved.

Features:

• Reduces chlorine, taste and odor
• Effective at filtering cryptosporidium and 
• giardia cysts
• High capacity chlorine reduction
• Nominal 0.5 micron rating
• Made entirely of FDA-approved materials
• Ideal choice for a wide range of residential, food service, commercial and industrial applications

Water Filter Spec Sheets 

• Spout Type : Long Reach
• Height : 9"
• Reach : 5.5"
• Stud Length : 3"
• NSF/ANSI Certified : Yes

How you get water to your pump is important to the functionality and longevity of your pump system.

These pick up tubes shown fit the standard Hed Pak style 5 gallon water container. 

The standard connection on top is a 3/8 push fitting.

The tubing that can be used for this is 3/8 OD x 1/4 ID Polyethylene or Polyurethane. We do not recommend the use of Vinyl tubing as it is not approved for drinking water use.

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A custom designed stainless steel strainer finishes off the bottle of the pick up tube and keeps larger particles from traveling into the tube. 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container. This is so that you are less likely to pull air into the system if the water is run completely dry. 

Looking for 3/8" tubing, or install kits for Espresso machines, Sinks and more 

*Hedpak container not included 

----------------

Check out this quick video on the use of the pick up tube

 Looking for a Pick Up Tube for a standard 5 Gallon Water Tank

If you need a custom length please note required size in notes section during check out 

These quick connection fittings make removal of equipment and devices easy.

These Push Fit 3/8” x Quick Connect are made of rugged FDA approved Acetal Plastic. Each connector has a built in check valve so no water is lost during disconnected transport. Each kit includes one female and one male quick connect.

Available as individual Male and Female parts as well. 

Easy installation just like all of our push fittings.