Adventure Vanwerks // Adventure Vehicle Plumbing and Electrical

How you get water to your pump is important to the functionality and longevity of your pump system.

These pick up tubes shown fit the Reliance Auqatainer 7 gallon, 4 Gallon or 7 Gallon Jumbotainer 2.0 water containers but we can create any length you might need.

The standard connection on top is a 3/8 push fitting.

The tubing that can be used for this is 3/8 OD x 1/4 ID Polyethylene or Polyurethane. We do not recommend the use of Vinyl tubing as it is not approved for drinking water use.

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A custom designed stainless steel strainer finishes off the bottle of the pick up tube and keeps larger particles from traveling into the tube. 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container. This is so that you are less likely to pull air into the system if the water is run completely dry. 

Looking for 3/8" tubing, or install kits for Espresso machines, Sinks and more 

7 Gallon Aquatainer available Separately 

----------------

Check out this quick video on the use of the pick up tube

 Looking for a Pick Up Tube for a standard 5 Gallon Water Tank

If you need a custom length please note required size in notes section during check out 

How you get water to your pump is important to the functionality and longevity of your pump system. We designed these pick up tubes as a solution for anyone looking to move water from a tank with ease.

These pick up tubes shown fit a standard 5 gallon water container/ jug but we can create any length you might need.

*The 5 Gallon Pick Up Tube comes with a blue cap on the top that fits most standard 5 gallon water bottles. Please note, the cap does not seal or create a water tight fit, it is designed to sit gently on top of the water jug to keep out debris. This cap does not fit threaded or glass bottles

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A *NEW* slim fit stainer on the end allows for an easy installation! 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container,  his is designed in an effort to keep settled debris from clogging your inlet screen

Total length of Pick Up Tube is approximately 20" - depth of pick up tube into container can be controlled by adjusting placement of lid.

Use a Reliance Brand Fresh Water Tank? Check out our Pick Up Tube for Reliance Tanks

Check out this quick video on the use of the pick up tube

If you need a custom length please note required size in notes section during check out 

Created for those looking to connect two Caffewerks Pick Up Tubes to one Water Pump System.

Connecting two fresh water tanks to your mobile water pump system and espresso machine can have several benefits:

1. Increased Water Storage: By connecting two fresh water tanks, you effectively increase the amount of water available for your system. This is particularly useful if you anticipate needing a larger water supply for extended periods without access to a water source.

2. Extended Operation Time: Having two fresh water tanks connected to your system allows for longer operation without the need for refilling. This connection allows your pump system to pull water from both tanks simultaneously. 

3. Convenience and Efficiency: Connecting two tanks to your system can make refilling and maintenance more convenient. This setup saves time and effort, especially if you frequently need to refill the tanks.

Remember to properly configure and maintain your system, including using appropriate filters to ensure the water remains clean and suitable for use in your espresso machine.

*Pick Up Tube Not Included 

How you get water to your pump is important to the functionality and longevity of your pump system.

These pick up tubes shown fit the standard Hed Pak style 5 gallon water container. 

The standard connection on top is a 3/8 push fitting.

The tubing that can be used for this is 3/8 OD x 1/4 ID Polyethylene or Polyurethane. We do not recommend the use of Vinyl tubing as it is not approved for drinking water use.

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A custom designed stainless steel strainer finishes off the bottle of the pick up tube and keeps larger particles from traveling into the tube. 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container. This is so that you are less likely to pull air into the system if the water is run completely dry. 

Looking for 3/8" tubing, or install kits for Espresso machines, Sinks and more 

*Hedpak container not included 

----------------

Check out this quick video on the use of the pick up tube

 Looking for a Pick Up Tube for a standard 5 Gallon Water Tank

If you need a custom length please note required size in notes section during check out