How you get water to your pump is important to the functionality and longevity of your pump system.

These pick up tubes shown fit the Reliance Auqatainer 7 gallon, 4 Gallon or 7 Gallon Jumbotainer 2.0 water containers but we can create any length you might need.

The standard connection on top is a 3/8 push fitting.

The tubing that can be used for this is 3/8 OD x 1/4 ID Polyethylene or Polyurethane. We do not recommend the use of Vinyl tubing as it is not approved for drinking water use.

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A custom designed stainless steel strainer finishes off the bottle of the pick up tube and keeps larger particles from traveling into the tube. 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container. This is so that you are less likely to pull air into the system if the water is run completely dry. 

Looking for 3/8" tubing, or install kits for Espresso machines, Sinks and more 

7 Gallon Aquatainer available Separately 

----------------

Check out this quick video on the use of the pick up tube

 Looking for a Pick Up Tube for a standard 5 Gallon Water Tank

If you need a custom length please note required size in notes section during check out 

• Crafted from food-grade LDPE and HDPE plastic, this 5-gallon water jug container for drinking ensures that the water you carry remains uncontaminated and safe to drink
• Durable water storage jug 5-gallon container that boasts a 5-gallon/20-liter capacity, ensuring you have access to safe and clean drinking water during your upcoming activities
• Minimum wall thickness of this 5-gallon water jug container is 0.10 inches (2.5 mm), which ensures durability and longevity; Filling water is easy because of the container's small spout or spigot
• Have clean water with you wherever your next outdoor adventure takes you with Scepter's lightweight 5-gallon water cooler jug portable water storage container
• Sleek tan color with dimensions measuring (L x W x H)13.7 x 6.8 x 18.8 inches and a weight of 4.33 pounds, this water jug storage container is not only functional but also aesthetically pleasing

*Please note: Air vent should be open while in use

Please note: Water tanks/jugs are not eligible for return or exchange. 

• Works seamlessly with all Caffewerks water pump systems using our CPC quick connects.
• At 3 gallons of volume the tanks are lighter to carry and they fit very well in cart configurations.

• Perfect for use in mobile food service, including food trucks and mobile carts, Home espresso machine installs, and anywhere else you need portable water containers.
• Volume-maximizing design — while many water containers contain 10L, ours goes to 11. 
  
• Multiple dispensing options built in, including two openings for easy filling, dispensing, and cleaning.
• Use these for camping too! Designed to be easy to carry from car to campsite and fits in the space behind your vehicle’s wheel well.
• Comfortable, removable webbed carry handles, built-in tiedown guides.
• Spigot and quick-connect fitting for accessory attachment included.
• Constructed from BPA-free, food-grade LDPE.

Consists of:
1 x Hydration Water Jug 11L / 2.9 Gal

Product Dimensions:
254mm (10") L x 178mm (7.01") W x 369mm (14.53") H

Weight:
1.75kg (3.86lbs)

Operating Instructions

Please note: Water tanks/jugs are not eligible for return or exchange. 

These quick connection fittings make removal of equipment and devices easy.

Four inches of 3/8 OD tubing is provided on each connector. Each kit includes one female and one male quick connect.

Easy installation into our push fittings.

Filtro Azul

Adding UV-C LED water purification to your build is as easy as installing the Filtro Azul device before the point of use.

• Flow rates up to 8 LPM 
• Higher flow rates can be addressed with multiple units in parallel 
• Disinfection performance third party validated
• Self-contained in one unit (reactor, light source, ballast, and controls)
• State of the art UV-C LEDs with lamp life up to 10,000 hours
• Highly configurable with water and electrical connections, cooling, and UV-C output power

Have total confidence in the water quality for your family, eliminating up to 99.9999% of bacteria and viruses. When used with our 5" Carbon Block Prefilter, the system also provides for removal of:

• Reduced chlorine, taste and odor
• Effective filtering of cryptosporidium and 
• giardia cysts
• High capacity chlorine reduction
• Nominal 0.5 micron rating

Maintenance-free

Very low maintenance requirements & operates on-demand –only when water is flowing.

Low power consumption. The system is activated only when water is flowing, reducing power consumption by 90% compared to traditional other systems.

12v power source required.

Pressurized water required.

Filtro UV-C + Carbon

Adding UV-C LED water purification to your build is as easy as installing the Filtro UV-C + Carbon System before the point of use.

UV-C LED and Carbon Block pre-filter combined for the perfect addition to your water pump system

• Flow rates up to 8 LPM 
• Higher flow rates can be addressed with multiple units in parallel 
• Disinfection performance third party validated
• Self-contained in one unit (reactor, light source, ballast, and controls)
• State of the art UV-C LEDs with lamp life up to 10,000 hours
• Highly configurable with water and electrical connections, cooling, and UV-C output power

Have total confidence in the water quality for your family, eliminating up to 99.9999% of bacteria and viruses. The 5" Carbon Block Pre-filter also provides for removal of:

• Reduced chlorine, taste and odor
• Effective filtering of cryptosporidium and 
• giardia cysts
• High capacity chlorine reduction
• Nominal 0.5 micron rating

Pre Mounted to a HDPE plastic mounting panel. Predrilled and ready for installation

Maintenance-free

Very low maintenance requirements & operates on-demand –only when water is flowing.

Low power consumption. The system is activated only when water is flowing, reducing power consumption by 90% compared to traditional other systems.

Dimensions

10.5w x 9.5t x 5.5 d

Weight

8 Lbs

12v power source required.

Pressurized water required.

How you get water to your pump is important to the functionality and longevity of your pump system.

These pick up tubes shown fit the standard Hed Pak style 5 gallon water container. 

The standard connection on top is a 3/8 push fitting.

The tubing that can be used for this is 3/8 OD x 1/4 ID Polyethylene or Polyurethane. We do not recommend the use of Vinyl tubing as it is not approved for drinking water use.

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A custom designed stainless steel strainer finishes off the bottle of the pick up tube and keeps larger particles from traveling into the tube. 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container. This is so that you are less likely to pull air into the system if the water is run completely dry. 

Looking for 3/8" tubing, or install kits for Espresso machines, Sinks and more 

*Hedpak container not included 

----------------

Check out this quick video on the use of the pick up tube

 Looking for a Pick Up Tube for a standard 5 Gallon Water Tank

If you need a custom length please note required size in notes section during check out