Adventure Vanwerks // Adventure Vehicle Plumbing and Electrical

How you get water to your pump is important to the functionality and longevity of your pump system.

These pick up tubes shown fit the Reliance Auqatainer 7 gallon, 4 Gallon or 7 Gallon Jumbotainer 2.0 water containers but we can create any length you might need.

The standard connection on top is a 3/8 push fitting.

The tubing that can be used for this is 3/8 OD x 1/4 ID Polyethylene or Polyurethane. We do not recommend the use of Vinyl tubing as it is not approved for drinking water use.

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A custom designed stainless steel strainer finishes off the bottle of the pick up tube and keeps larger particles from traveling into the tube. 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container. This is so that you are less likely to pull air into the system if the water is run completely dry. 

Looking for 3/8" tubing, or install kits for Espresso machines, Sinks and more 

7 Gallon Aquatainer available Separately 

----------------

Check out this quick video on the use of the pick up tube

 Looking for a Pick Up Tube for a standard 5 Gallon Water Tank

If you need a custom length please note required size in notes section during check out 

• Rigid, 7-gallon /  26.5 liter rectangular water container with molded contour grip
• Made with BPA free HDPE Plastic
• Space-saving design for easy storing and stacking when empty
• New and improved screw-on vent; hideaway spigot for on-demand water dispensing
• Suitable for outdoors activities and emergency water storage
• NOTE: Prolonged exposure to direct sunlight will cause the water container to degrade and become brittle, increasing the chance of leaks. It is highly recommended to store water containers in cool shaded areas.
• Five-year warranty against manufacturer's defects
• Measurements are 11.5 x 12 x 16 inches
• 
  
  2lbs 

Please note: Water tanks/jugs are not eligible for return or exchange. 

Filtro Azul

Adding UV-C LED water purification to your build is as easy as installing the Filtro Azul device before the point of use.

• Flow rates up to 8 LPM 
• Higher flow rates can be addressed with multiple units in parallel 
• Disinfection performance third party validated
• Self-contained in one unit (reactor, light source, ballast, and controls)
• State of the art UV-C LEDs with lamp life up to 10,000 hours
• Highly configurable with water and electrical connections, cooling, and UV-C output power

Have total confidence in the water quality for your family, eliminating up to 99.9999% of bacteria and viruses. When used with our 5" Carbon Block Prefilter, the system also provides for removal of:

• Reduced chlorine, taste and odor
• Effective filtering of cryptosporidium and 
• giardia cysts
• High capacity chlorine reduction
• Nominal 0.5 micron rating

Maintenance-free

Very low maintenance requirements & operates on-demand –only when water is flowing.

Low power consumption. The system is activated only when water is flowing, reducing power consumption by 90% compared to traditional other systems.

12v power source required.

Pressurized water required.

How you get water to your pump is important to the functionality and longevity of your pump system.

These pick up tubes shown fit the standard Hed Pak style 5 gallon water container. 

The standard connection on top is a 3/8 push fitting.

The tubing that can be used for this is 3/8 OD x 1/4 ID Polyethylene or Polyurethane. We do not recommend the use of Vinyl tubing as it is not approved for drinking water use.

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A custom designed stainless steel strainer finishes off the bottle of the pick up tube and keeps larger particles from traveling into the tube. 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container. This is so that you are less likely to pull air into the system if the water is run completely dry. 

Looking for 3/8" tubing, or install kits for Espresso machines, Sinks and more 

*Hedpak container not included 

----------------

Check out this quick video on the use of the pick up tube

 Looking for a Pick Up Tube for a standard 5 Gallon Water Tank

If you need a custom length please note required size in notes section during check out