Hydronix ICF-6Q38 6" Inline Water Filter with 3/8" Quick Connect

The Hydronix ICF-6Q38 inline filter features 3/8" Quick-Connect fittings that allow for installation and replacement in a matter of seconds without the use of tools. 

A simple solution for inline filtration running to your espresso machine or water tap. 3/8"Push Fit fittings compatible with all Caffewerks Water Pump Systems.

Reduces Chlorine Taste and Odor

Contains coconut shell, granular activated carbon (GAC)

5 micron nominal filtration

1,000 gallon capacity 

3/8" Quick Connect (QC) fittings

Dimensions : 2" X 6"

Certified to NSF Standard 42

Non-proprietary design connects to any 3/8" water supply tubing

• For Compliance with Prop 65 Arsenic: Flush all carbon filters at the rated flow rate for 5+ minutes prior to using water from filter.

The Hydronix ICF-10Q38 inline filter features 3/8" Quick-Connect fittings that allow for installation and replacement in a matter of seconds without the use of tools.

A simple solution for inline filtration running to your espresso machine or water tap. 3/8"Push Fit fittings compatible with all Caffewerks Water Pump Systems.

• Reduces Chlorine Taste and Odor
• Contains coconut shell, granular activated carbon (GAC)
• 5 micron nominal filtration
• 2,000 gallon capacity 
• 3/8" Quick Connect (QC) fittings
• Dimensions : 2" X 10"
• Certified to NSF Standard 42
• Non-proprietary design connects to any 3/8" water supply tubing

• For Compliance with Prop 65 Arsenic: Flush all carbon filters at the rated flow rate for 5+ minutes prior to using water from filter.

• Spout Type : Long Reach
• Height : 9"
• Reach : 5.5"
• Stud Length : 3"
• NSF/ANSI Certified : Yes

Has a built in 90 degree elbow that connects to the drain fitting on the 150mm rinser 

This hose fits snug onto the SpinJet Rinser Drain

elbow sleeve internal ø 22 mm
straight sleeve internal ø 19 mm

Perfect for use with our 300mm, 600mm and Caffewerks Mini Rinser pitcher rinsers. 

This hose fits snug onto the SpinJet Rinser Drain

5ft long 

straight sleeve internal ø 19 mm

This pitcher rinser connection fitting is Push Fit 3/8 tube x 1/2 BSP 90 degree elbow.

That elusive piece that you can’t buy at the hardware store. 

If you are installing a rinser in a low profile setting this helps get it done.

Looking for the straight version of the rinser fitting?

Replacement part for our 3.3 pump systems

Flojet Quiet Quad Pressure Switch 35 PSI 

Part# 02090104

3/8" TUBE X 3/8" TUBE UNION ELBOW-BLACK

Features:

• Leak Resistant Dual EPDM O-rings
  
• UV and Chemical Resistant Polypropylene
  
• Certified to NSF/ANSI Standard 58
  
• 304 Stainless Steel Gripping Teeth
• 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  
• 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  
• For use with Plastic or Soft Metal Tubing

*manufacturer may vary*

Email or fill out question box below with any questions 

Using a Caffewerks Dual Stage Water Filter System on an espresso machine can have several benefits:

1. Improved taste: Water filters can remove impurities such as chlorine, sediment, and minerals that can affect the taste of your espresso. By removing these impurities, the water used to make your espresso will taste cleaner and less harsh.

2. Increased lifespan of the machine: Minerals in hard water can build up and damage the internal components of an espresso machine over time. Using a water filter can reduce the mineral buildup and extend the lifespan of your machine.

3. Better performance: By reducing mineral buildup, a water filter can help maintain the optimal water pressure and temperature for making espresso. This can result in a more consistent and better-quality espresso.

4. Easier maintenance: A water filter can help reduce the amount of maintenance required for your espresso machine. By reducing mineral buildup, you may need to descale your machine less frequently.

Overall, using a water filter on your espresso machine can improve the taste and quality of your espresso, extend the lifespan of your machine, and reduce the amount of maintenance required.

Coffee is 98% water and filtration is the best way to protect your espresso equipment, and clean water is also the best way to keep your coffee tasting great. 

The Caffewerks Dual Panel is a sediment pre-filter to ensure that the secondary carbon block filter will last longer. 

1. The first filter is a High Efficiency 2-1/2" Polypropylene Sediment Depth Filter, which is a reliable and economical solution for pre-filtration in many applications. The 2-1/2" sediment depth filter offers greater surface area for longer life and greater dirt holding capacity. The filters are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.

2. The Second filter is a carbon block cartridge that is highly effective at reducing chlorine taste and odor from potable drinking water. The unique structure of the carbon block enables it to reduce giardia, cryptosporidium and other cysts and fine sediment particles down to 0.5 microns. The filter is manufactured entirely from  FDA-compliant materials. NSF and FDA Approved.

Features:

• Reduces chlorine, taste and odor
• Effective at filtering cryptosporidium and 
• giardia cysts
• High capacity chlorine reduction
• Nominal 0.5 micron rating
• Made entirely of FDA-approved materials
• Ideal choice for a wide range of residential, food service, commercial and industrial applications

Best Practice is to replace the filters twice a year, about every 6 months.

Replacment fitlers can be found here  

Dimensions: 

10.5” Wide 

4.5”   Deep 

9”   Tall 

Weight: 

6.5 LBS

 *Color of filter cap may vary*

Water Filter Spec Sheets 

Filter Replacement Guide 

 *Each Water Pump System is built to order. Please allow 10-15 days for order processing prior to shipping*

How you get water to your pump is important to the functionality and longevity of your pump system.

These pick up tubes shown fit the standard Hed Pak style 5 gallon water container. 

The standard connection on top is a 3/8 push fitting.

The tubing that can be used for this is 3/8 OD x 1/4 ID Polyethylene or Polyurethane. We do not recommend the use of Vinyl tubing as it is not approved for drinking water use.

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A custom designed stainless steel strainer finishes off the bottle of the pick up tube and keeps larger particles from traveling into the tube. 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container. This is so that you are less likely to pull air into the system if the water is run completely dry. 

Looking for 3/8" tubing, or install kits for Espresso machines, Sinks and more 

*Hedpak container not included 

----------------

Check out this quick video on the use of the pick up tube

 Looking for a Pick Up Tube for a standard 5 Gallon Water Tank

If you need a custom length please note required size in notes section during check out 

These quick connection fittings make removal of equipment and devices easy.

These Push Fit 3/8” x Quick Connect are made of rugged FDA approved Acetal Plastic. Each connector has a built in check valve so no water is lost during disconnected transport. Each kit includes one female and one male quick connect.

Available as individual Male and Female parts as well. 

Easy installation just like all of our push fittings.