The Caffewerks low volume / Home Panel water pump system with 1/2 liter accumulator is perfect for use with Rinsers, Single Group Espresso Machines in low volume situations and bulk brewing equipment and other equipment that does not require high volume pressure.

The system includes a 1.5 GPM x 35 PSI pump connected with a check valve to a 1/2 liter accumulator tank for better down line pressure and reduced pump cycling.   

Add install kits for Espresso Machine or Pitcher Rinser 

Contents: 

1.4 GPM Pump and 1/2 L Accumulator Pump System with fittings for 3/8th Bev Tubing

3 amp/ 110v Power Supply 

Dimensions: 

 9.5  x 10.5  x  5.5 

8lbs 

 Looking for a troubleshooting guide or FAQ sheet- look no further! 

*Each Water Pump System is built to order. Please allow 7-10 days for order processing prior to shipping*

The Caffewerks High Volume water pump system is perfect for all catering operations where you need to connect a commercial espresso machine (one or two groups), pitcher rinser, sink and coffee brewer. This system can handle it all! 

Built with the same components as our Stack Mounted High Volume System, the Panel Mounted version allows for a wall or vertical installation freeing up floors space in your cart, trailer or truck! 

 Caffewerks water systems are built using 3/8 Push Fit connections for simple install and use.

Add install kits for Espresso Machine and Pitcher Rinser  if needed. Our selection of Push Fit Fittings can be found here.

Contents:  

3.2 GPM Aquatec Pump

2 Gal Accumulator Pump 

3/8 Push Fit Connections

110v Powered Pump / 1.1 amps / 132 watts

Dimensions: 

11" H x 15" W x 15" D

12lbs 

Water Pump Trouble Shooting Guide

If you need assistance Click here for our water pump consulting services starting at $ 55.00  

*Each Water Pump System is built to order. Please allow 7-10 days for order processing prior to shipping*

The Caffewerks High Volume Water Pump System is your go-to solution for all catering operations, pop-up coffee shops, and compact commercial setups. Designed to effortlessly support your essential coffee equipment, this system provides reliable water flow for a commercial espresso machine, pitcher rinser, sink, and coffee brewer—all from a single, high-capacity source.

Key Features:

• High Volume Capacity: Specially engineered to handle multiple devices simultaneously, ensuring consistent water supply even during peak hours. Ideal for catering businesses, mobile cafes, or  mobile carts or trailers where pressurized water is required. 
• Quick & Easy Installation: Built with 3/8 Push Fit connections, this system allows for a hassle-free setup, minimizing downtime and ensuring your operation runs smoothly.
• Compatible with Additional Kits: Choose from our install kits for Espresso Machines and Pitcher Rinsers to easily expand your setup as needed.

Why Choose Caffewerks?

The Caffewerks High Volume Water Pump System is a reliable solution for professionals who require seamless water management in busy settings. Whether you're running a compact coffee cart, a bustling small café, or a pop-up catering service, this system delivers consistent performance to keep you running efficiently. Built for durability and ease of use, the Caffewerks system is designed to make installation and everyday operations as straightforward as possible.

Available Accessories:

• Install Kits: Optimize your setup with dedicated install kits for espresso machines and pitcher rinsers. Easily connect and get up and running quickly.

Specifications:

• Connections: 3/8 Push Fit
• Applications: Commercial espresso machine, pitcher rinser, sink, and coffee brewer

Contents:  

3.2 GPM Aquatec Pump

2 Gal Accumulator Pump 

3/8 Push Fit Connections

110v Powered Pump / 1.1 amps / 132 watts

Dimensions: 

14" H x 8"W x 16"D

12lbs 

Water Pump Trouble Shooting Guide

If you need assistance Click here for our water pump consulting services starting at $ 55.00  

*Each Water Pump System is built to order. Please allow 7-10 days for order processing prior to shipping*

The Caffewerks Medium Volume Water Pump System is the ideal choice for small catering operations and compact coffee setups. Designed specifically to connect an espresso machine and a pitcher rinser, this system offers dependable water supply for essential equipment. With a 2-gallon accumulator, it efficiently supports high-demand commercial coffee brewers like Fetco, Curtis, or Bunn, ensuring consistent performance for batch brewing.

Key Features:

• Optimized for Espresso Machines and Rinsers: Specially built to accommodate the water flow needs of an espresso machine and a pitcher rinser, making it a perfect fit for small catering operations and busy service environments.
• Pre-Plumbed for Convenience: The kit comes pre-assembled and plumbed to a T fitting at the base of the accumulator, simplifying installation and reducing setup time. Just connect and go!
• Ideal for Batch Brewing: Equipped with a 2-gallon accumulator, this system is engineered to handle the large water draws required by commercial coffee brewers, such as Fetco, Curtis, or Bunn models.

Why Choose the Caffewerks Medium Volume System?

For professionals managing a smaller coffee setup, the Caffewerks Medium Volume Water Pump System delivers reliable water management with a focus on versatility and efficiency. From connecting an espresso machine and pitcher rinser to supporting larger batch brewers, this system meets the demands of small catering businesses, mobile cafés, and specialty coffee shops.

Ready-to-Install Design:

The system arrives plumbed to a T fitting, making installation straightforward. With a comprehensive design tailored for small-scale commercial coffee operations, you’ll spend less time setting up and more time serving customers. 

Add install kits for Espresso Machine and Pitcher Rinser or Coffee Brewer 

Specifications:

• Accumulator Capacity: 2 gallons
• Pre-Plumbed Connections: T fitting at the bottom of the accumulator
• Applications: Espresso machine, pitcher rinser, commercial coffee brewer

Contents: 

1.5 GPM Pump and 2 Gal Accumulator Pump System with fittings for 3/8th Bev Tubing 

115 volt / .09 AMPS / 10.8 watts 

Dimensions: 

12" H x 8"W x 12"D

12lbs 

Water Pump Trouble Shooting Guide

Trouble Shooting Video 

If you need assistance Click here for our water pump consulting services starting at 55.00  

*Each Water Pump System is built to order. Please allow 7-10 days for order processing prior to shipping*

The Caffewerks High Volume Water Pump System is engineered specifically for catering operations and coffee setups featuring Slayer Espresso machines. Designed to meet Slayer’s unique installation requirements, this system efficiently connects and supports your espresso machine, pitcher rinser, sink, and coffee brewer—all from a single, high-capacity water source. Whether you’re catering an event or running a busy café, this system has you covered.

Key Features:

• Optimized for Slayer Espresso Machines: Built to deliver the required 3 BAR of pressure essential for proper Slayer installation, ensuring your espresso machine performs at its best. Here is a link to the current Slayer install requirements
• 2-Gallon Accumulator for High Demand: Includes a 2-gallon accumulator, providing stable water pressure and volume for larger water draws—ideal for commercial coffee brewers and other essential equipment.
• Pre-Plumbed for Easy Setup: The system comes completely pre-plumbed with a check valve to a T fitting at the bottom of the accumulator, reducing installation time and complexity. Just connect and start pulling great espresso!
• Flexible Equipment Compatibility: Connect and support multiple devices, including espresso machines, pitcher rinsers, sinks, and brewers, for a comprehensive coffee setup.

Why Choose the Caffewerks High Volume System for Slayer?

This system is designed with the specific requirements of Slayer Espresso machines in mind, making it the perfect solution for high-performance setups. The combination of precise water pressure and a large accumulator allows for seamless operation, even in demanding catering or café environments. Whether you’re pulling shots or rinsing pitchers, you’ll have consistent water flow and pressure to maintain peak performance.

Available Accessories:

• Install Kits : Add install kits for Espresso Machines and Pitcher Rinsers to customize your setup according to your needs.

Specifications:

• Accumulator Capacity: 2 gallons
• Pressure Level: 3 BAR required for Slayer Espresso machines
• Pre-Plumbed Connections: T fitting with a check valve at the bottom of the accumulator
• Applications: Slayer Espresso machine, pitcher rinser, sink, and commercial coffee brewer

Contents:  

1.5 GPM / 60 PSI Pump and 2 Gal Accumulator Pump System with fittings for 3/8 Beverage Tubing 

0.9 amp/ 110v Power Supply 

Dimensions: 

12" x 8" x 12" 

9lbs 

If you need assistance Click here for our water pump consulting services starting at $ 55.00  

Water Pump Trouble Shooting Guide

*Each Water Pump System is built to order. Please allow 7-10 days for order processing prior to shipping*

The Caffewerks High Volume water pump system in 220v  is perfect for small catering operations where you need to connect a commercial espresso machine, pitcher rinser, sink and coffee brewer. This system can handle it.

 Caffewerks water systems are built using 3/8 Push Fit connections for simple install and use. Add install kits for Espresso Machine and Pitcher Rinser  if needed. Our selection of Push Fit Fittings can be found here.

Contents:  

3.2 GPM Aquatec Pump

2 Gal Accumulator Pump 

3/8 Push Fit Connections

220v Powered Pump

Dimensions: 

14" x 8" x 12" 

12lbs 

Water Pump Trouble Shooting Guide

If you need assistance Click here for our water pump consulting services starting at $ 55.00  

 *Each Water Pump System is built to order. Please allow 7-10 days for order processing prior to shipping*

The Caffewerks Medium Volume pump system is perfect for small catering operations where you need to connect a pitcher rinser as well as an espresso machine.

We build the system for this specific use and can help guide you through installation. Kit comes completely plumbed to a T fitting at the bottom of the accumulator and is ready for installation.

The Medium Volume System from Caffewerks will also be the best fit for a commercial coffee brewer, like a Fetco, Curtis or Bunn. The addition of the 2 gallon accumulator will best support the large water draw needed for batch brewing. 

Add install kits for Espresso Machine and Pitcher Rinser or Coffee Brewer 

Contents: 

1.5 GPM Pump and 2 Gal Accumulator Pump System with fittings for 3/8th Bev Tubing 

220v / EU Plug 

Dimensions: 

12" x 8" x 12" 

12lbs 

Water Pump Trouble Shooting Guide

Trouble Shooting Video 

If you need assistance Click here for our water pump consulting services starting at 55.00  

 *Each Water Pump System is built to order. Please allow 7-10 days for order processing prior to shipping*

This pre-assembled kit allows for the use of a 1/2 liter accumulator (pressure tank) to be used with a bottle water pump system like the Flojet BW5000 Series Bottle Water pump or the Caffewerks CW 5000.

The addition of an accumulator will allow better pressure for your espresso equipment and pitcher rinser and also keeps the pump from over cycling ( Turning on and off )

The kit is designed around 3/8" beverage tubing as a standard however we can supply additional fittings to match your current plumbing.

Contains: 

1/2 L Aquatec Accumulator 

Connections to attached to BW5000 or Other Bottle Water Pump 

Optional Equipment Install Kit: 

One Install Kit/ Connection manifold -includes fittings for use with Espresso machine, Rinser or Refrigerator (see photo for description) 

*We advise this system to be used with only one device 

Installation is quick and easy with our video: https://youtu.be/dH3jRFyb4EQ

If you need a custom configuration please contact us at info@caffewerks.com for assistance

All Caffewerks Water Pump Systems are built to order, please give 7 days for build time

Caffewerks Connect Cube: Mobile Water, Filtration, and Power Distribution System

The Caffewerks Connect Cube line is designed to revolutionize mobile water supply systems for coffee and catering professionals. With our deep industry experience, we’ve re-engineered our original mobile water pump systems for improved mobility and ease of use.

Key Features:

• Modular & Versatile: Use the Connect Cubes independently or combine them for greater flexibility, depending on your setup.
• Powerful Pump System: The Hydro Connect Cube includes a 1.7 GPM (gallons per minute) water pump with a 60 PSI rating, paired with a ½ liter accumulator tank for reliable water flow.
• Durable & Stackable Design: Housed in a custom, stackable HDPE case with a built-in handle for easy transport. Quick-connect inlet and three outlets are securely positioned to withstand movement and impacts.
• Efficient Space Management: Optional Connect Clips allow side-by-side configurations or stacking to optimize your workspace.

Ideal for:

• One-group espresso machines
• Pitcher rinsers
• Small sink connections

Product Specifications:

• Power: 110v
• Pump: 1.7 GPM 60 PSI Diaphragm Pump
• Accumulator Tank: ½ Liter
• Connections: One ¼” quick-connect inlet & Three ¼” quick-connect outlets
• Case: Durable HDPE Carry Case / Stackable Connect Cube
• Dimensions: 5.5” W x 14” L x 11.5” H
• Weight: 12 lbs (Hydro Cube)

What’s Included:

• Install Kit for Espresso Machine
• Install Kit for Rinser
• 7-Gallon Aquatainer Pick-Up Tube
• Optional Add-On: Caffewerks Spinjet Mini Rinser

Additional Options:

• Extra Install/Connection Kits: Available separately.
• Water Pump Consulting: Starting at $55.00.

Note: Each system is built to order. Please allow 10 days for processing before shipping.

Elevate your mobile coffee operations with the Caffewerks Connect Cube—where convenience meets reliability.

The Caffewerks Connect Cube line is designed to revolutionize mobile water supply systems, offering flexibility and reliability for coffee and catering professionals. With years of experience in the industry, we've refined our early designs to create a system that enhances mobility and ease of use.

Key Features:

• Modular Design: Use the Connect Cubes individually or together based on your setup needs.
• Space-Saving & Portable: The unique stacking design and built-in handle make transport easy. Optional Connect Clips allow side-by-side configurations and stacking for efficient space management.
• Comprehensive Filtration: Coffee is 98% water, and our filtration system is essential for protecting your espresso equipment and maintaining great coffee taste.

Dual-Filter Connect Cube:

The Dual-Filter Connect Cube uses a two-stage filtration process for high-efficiency water purification:

1. First Filter: A 2.5" Polypropylene Sediment Depth Filter that offers greater surface area for longer life and dirt holding capacity. It’s a cost-effective solution for pre-filtration, listed for food contact applications under Title 21 of the U.S. Code of Federal Regulations.
2. Second Filter: A carbon block cartridge that effectively reduces chlorine taste, odor, fine sediment, and cysts (such as giardia and cryptosporidium). This filter features a nominal 0.5-micron rating with a 2 GPM flow rate and is made entirely from FDA-compliant materials. NSF and FDA approved.

Ideal for:

• Filtering water for espresso machines
• Providing separate non-filtered outlets for devices like pitcher rinsers and sinks

Product Specifications:

• Dimensions: 5.5” W x 14” L x 11.5” H
• Weight: 12 lbs (Filtro Cube)

What’s Included:

• 18” connection for linking the Filtro Connect Cube to the Hydro Connect Cube

Filtration Features:

• Reduces chlorine, taste, and odor
• Filters cryptosporidium and giardia cysts
• High capacity for chlorine reduction
• Nominal 0.5-micron rating
• Ideal for residential, food service, commercial, and industrial applications

Additional Options:

• Standalone Install Kits: Available separately for Filtro Cube
• Water Filter Spec Sheets & Replacement Guide
• Water Pump Consulting: Starting at $55.00

Note: Each system is custom-built to order. Please allow 10-15 days for processing before shipping.

Elevate your mobile coffee operations with the Caffewerks Connect Cube—where quality meets convenience.

The Caffewerks Connect Cube line is designed to redefine mobile water, filtration, and power distribution solutions. Leveraging our extensive experience in the mobile coffee and catering industry, we’ve refined our early designs to prioritize increased mobility and efficiency.

Hydro High Volume Connect Cube Overview:

The Hydro High Volume Connect Cube is an all-in-one water supply solution equipped with a powerful 3.2 GPM water pump paired with a 2-gallon accumulator tank to ensure a continuous water supply. Built into a custom, durable HDPE case, this system is engineered for reliability and convenience.

Key Features:

• Dual-Stage Water Filtration: Includes a pre-sediment filter and carbon block filters to reduce taste and odor issues. Replacement filters are available for purchase.
• Versatile Connectivity: The case is equipped with (1) quick-connect inlet, (4) filtered outlets, and (4) non-filtered outlets, all protected from bumps and jostles.
• Integrated Power Strip: Features a built-in waterproof 110v power strip to power additional 110v devices.
• Space-Saving & Portable: The stackable HDPE case design and built-in handle make transport and storage efficient. Stack it with our Connect Cube Portable Rinser for a complete setup.

Perfect for:

Catering, special events, trade shows, camping, and any environment where you need reliable water and power access. The Hydro High Volume Connect Cube easily supports multiple espresso machines, pitcher rinsers, and small sinks.

Product Specifications:

• Dimensions: 16.25" H x 11.75" W x 18" D
• Weight: 34 lbs

What’s Included:

• 3.2 GPM 60 PSI Diaphragm Pump
• 2-Gallon Accumulator
• Dual-Stage 5” Housing Water Filtration
• (1) Quick-Connect Inlet
• (8) Quick-Connect Outlets
• Espresso Machine Connect Kit
• Rinser Connect Kit
• 7 gallon aquatainer Pick-Up Tube
• 110v Waterproof Power Strip
• HDPE Carry Case / Stackable Connect Cube

Additional Options:

• Troubleshooting Guide & FAQs: Access our support materials anytime.
• Water Filter Spec Sheets & Replacement Guide
• Water Pump Consulting: Starting at $55.00 for expert support.

Note: Each system is custom-built to order. Please allow 10-15 days for processing before shipping.

Get ready to elevate your mobile coffee operations with the Caffewerks Connect Cube—designed for convenience, reliability, and efficiency.

Creating a mobile coffee setup? Need help getting the right parts? We can help sort out exactly what pump system(s), tubing, connectors, and fittings you need to finish out your mobile coffee space.   

This listing is for those who are brand new, and those who are ready to place an order, but have questions and want to make sure they've got exactly what they need to set up right out of the box. 

Lean on our 30 years of experience in the mobile water space, specially for coffee, for advice, tips, tricks, and suggestions for everything you might need in and on your cart, van, truck, bus or table. What water heater is the best? How do I access power? Where do I find 30 gallon water tanks, etc

Call and email support $65.00 per 30 minutes.

Most sessions take around 30 minutes to learn about your project and needs, answer any questions and allow us to put together draft invoice/product suggestions to share.

New consulting calls are typically scheduled on Wednesdays via google meet (if you would prefer a voice call with let us know) 

If you need help putting a system together please email us info@caffewerks.com

Filtro UV-C + Carbon

Adding UV-C LED water purification to your build is as easy as installing the Filtro UV-C + Carbon System before the point of use.

UV-C LED and Carbon Block pre-filter combined for the perfect addition to your water pump system

• Flow rates up to 8 LPM 
• Higher flow rates can be addressed with multiple units in parallel 
• Disinfection performance third party validated
• Self-contained in one unit (reactor, light source, ballast, and controls)
• State of the art UV-C LEDs with lamp life up to 10,000 hours
• Highly configurable with water and electrical connections, cooling, and UV-C output power

Have total confidence in the water quality for your family, eliminating up to 99.9999% of bacteria and viruses. The 5" Carbon Block Pre-filter also provides for removal of:

• Reduced chlorine, taste and odor
• Effective filtering of cryptosporidium and 
• giardia cysts
• High capacity chlorine reduction
• Nominal 0.5 micron rating

Pre Mounted to a HDPE plastic mounting panel. Predrilled and ready for installation

Maintenance-free

Very low maintenance requirements & operates on-demand –only when water is flowing.

Low power consumption. The system is activated only when water is flowing, reducing power consumption by 90% compared to traditional other systems.

Dimensions

10.5w x 9.5t x 5.5 d

Weight

8 Lbs

12v power source required.

Pressurized water required.

Hydro Plus

This panelized system allows for easy integration into any mobile water system.

The 1.4 GPM 12v pump pressurizes the system up to 40 PSI, and features a resettable low water feature. 3/8 push type fittings are used through out the system.

The UV-C LED water purification component provides:

• Flow rates up to 8 LPM 
• Higher flow rates can be addressed with multiple units in parallel 
• Disinfection performance third party validated
• Self-contained in one unit (reactor, light source, ballast, and controls)
• State of the art UV-C LEDs with lamp life up to 10,000 hours
• Highly configurable with water and electrical connections, cooling, and UV-C output power

Have total confidence in the water quality for your family, eliminating up to 99.9999% of bacteria and viruses.  Our 6" Carbon Block Pre-filter, the system also provides for removal of:

• Reduced chlorine, taste and odor
• Effective filtering of cryptosporidium and 
• giardia cysts
• High capacity chlorine reduction
• Nominal 0.5 micron rating

Maintenance-free

Very low maintenance requirements & operates on-demand –only when water is flowing.

Low power consumption. The system is activated only when water is flowing, reducing power consumption by 90% compared to traditional other systems.

12v power source required. 2.5mm pin connection

Wholesale Pricing Available

How you get water to your pump is important to the functionality and longevity of your pump system. We designed these pick up tubes as a solution for anyone looking to move water from a tank with ease.

These pick up tubes shown fit a standard 5 gallon water container/ jug but we can create any length you might need.

*The 5 Gallon Pick Up Tube comes with a blue cap on the top that fits most standard 5 gallon water bottles. Please note, the cap does not seal or create a water tight fit, it is designed to sit gently on top of the water jug to keep out debris. 

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A *NEW* slim fit stainer on the end allows for an easy installation! 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container,  his is designed in an effort to keep settled debris from clogging your inlet screen

Total length of Pick Up Tube is approximately 20" - depth of pick up tube into container can be controlled by adjusting placement of lid.

Use a Reliance Brand Fresh Water Tank? Check out our Pick Up Tube for Reliance Tanks

Check out this quick video on the use of the pick up tube

If you need a custom length please note required size in notes section during check out 

How you get water to your pump is important to the functionality and longevity of your pump system.

These pick up tubes shown fit the Reliance Auqatainer 7 gallon, 4 Gallon or 7 Gallon Jumbotainer 2.0 water containers but we can create any length you might need.

The standard connection on top is a 3/8 push fitting.

The tubing that can be used for this is 3/8 OD x 1/4 ID Polyethylene or Polyurethane. We do not recommend the use of Vinyl tubing as it is not approved for drinking water use.

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A custom designed stainless steel strainer finishes off the bottle of the pick up tube and keeps larger particles from traveling into the tube. 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container. This is so that you are less likely to pull air into the system if the water is run completely dry. 

Looking for 3/8" tubing, or install kits for Espresso machines, Sinks and more 

7 Gallon Aquatainer available Separately 

----------------

Check out this quick video on the use of the pick up tube

 Looking for a Pick Up Tube for a standard 5 Gallon Water Tank

If you need a custom length please note required size in notes section during check out 

This tubing cutter helps ensure a nice clean cut that results in a better fit.

Works with tubing up to 1/2" inch.

Perfect addition to our install kits

This Accumulator Tank is intended for installation in
any pumped water system controlled by a pressure
switch. For example, most pressure pumps as found
in boats, RV's, motor caravans, coaches and similar
applications.

The Accumulator Tank smooths water flow and reduces on/
off cycling of the pump by lessening the variation in pressure
and flow between the pump and the outlets in the system.
The even flow of water gives better control of hot water
temperature especially noticeable with instantaneous
gas water heaters and with showers.
Reduces on/off cycling, reduces noise from the pump
motor, and from shock pressures (water hammer). It
also reduces battery drain from current spikes.

When used with a one way valve the system can provide steady down line pressure. We recommend using accumulator with all water pump applications. How large of a tank is determined by use requirements.

2 gallon 1/2" Female NPT
Custom wall Brackets included
Reverse Osmosis Expansion Tank
Max Liquid Pressure: 130 PSI Pre-Pressurized Air: 30 PSI

Dimensions: 

12" x 8" x 12" 

*PROP 65 WARNING*

• Spout Type : Long Reach
• Height : 9"
• Reach : 5.5"
• Stud Length : 3"
• NSF/ANSI Certified : Yes

 The Aqua Jet UNO pump is a five chamber positive displacement diaphragm pump system with a 2 liter Accumulator Tank. This pump is the ideal choice for pressurizing water in a closed system such as a food truck or in a RV. It can easily build the pressure required for a pressurized water supply system.

Quiet operation • Smooth flowing • Self priming ( 2m 6.5ft for UNO 3.5) (2.5m 8.2ft for UNO 5.2) • Integrated pressure switch turns pump on and off automatically when tap is opened and closed • Dry running without damage • Low power consumption • Quick disconnect fittings

Filtro Azul

Adding UV-C LED water purification to your build is as easy as installing the Filtro Azul device before the point of use.

• Flow rates up to 8 LPM 
• Higher flow rates can be addressed with multiple units in parallel 
• Disinfection performance third party validated
• Self-contained in one unit (reactor, light source, ballast, and controls)
• State of the art UV-C LEDs with lamp life up to 10,000 hours
• Highly configurable with water and electrical connections, cooling, and UV-C output power

Have total confidence in the water quality for your family, eliminating up to 99.9999% of bacteria and viruses. When used with our 5" Carbon Block Prefilter, the system also provides for removal of:

• Reduced chlorine, taste and odor
• Effective filtering of cryptosporidium and 
• giardia cysts
• High capacity chlorine reduction
• Nominal 0.5 micron rating

Maintenance-free

Very low maintenance requirements & operates on-demand –only when water is flowing.

Low power consumption. The system is activated only when water is flowing, reducing power consumption by 90% compared to traditional other systems.

12v power source required.

Pressurized water required.

Using a Caffewerks Dual Stage Water Filter System on an espresso machine can have several benefits:

1. Improved taste: Water filters can remove impurities such as chlorine, sediment, and minerals that can affect the taste of your espresso. By removing these impurities, the water used to make your espresso will taste cleaner and less harsh.

2. Increased lifespan of the machine: Minerals in hard water can build up and damage the internal components of an espresso machine over time. Using a water filter can reduce the mineral buildup and extend the lifespan of your machine.

3. Better performance: By reducing mineral buildup, a water filter can help maintain the optimal water pressure and temperature for making espresso. This can result in a more consistent and better-quality espresso.

4. Easier maintenance: A water filter can help reduce the amount of maintenance required for your espresso machine. By reducing mineral buildup, you may need to descale your machine less frequently.

Overall, using a water filter on your espresso machine can improve the taste and quality of your espresso, extend the lifespan of your machine, and reduce the amount of maintenance required.

Coffee is 98% water and filtration is the best way to protect your espresso equipment, and clean water is also the best way to keep your coffee tasting great. 

The Caffewerks Dual Panel a sediment pre-filter to ensure that the secondary carbon block filter will last longer. The three filtered outlets are quick connections allowing easy connection to all of the devices that require filtered water.

1. The first filter is a High Efficiency 2-1/2" Polypropylene Sediment Depth Filter, which is a reliable and economical solution for pre-filtration in many applications. The 2-1/2" sediment depth filter offers greater surface area for longer life and greater dirt holding capacity. The filters are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.

2. The Second filter is a carbon block cartridge that is highly effective at reducing chlorine taste and odor from potable drinking water. The unique structure of the carbon block enables it to reduce giardia, cryptosporidium and other cysts and fine sediment particles down to 0.5 microns. The filter is manufactured entirely from  FDA-compliant materials. NSF and FDA Approved.

Features:

• Reduces chlorine, taste and odor
• Effective at filtering cryptosporidium and 
• giardia cysts
• High capacity chlorine reduction
• Nominal 0.5 micron rating
• Made entirely of FDA-approved materials
• Ideal choice for a wide range of residential, food service, commercial and industrial applications

Best Practice is to replace the filters twice a year, about every 6 months.

Replacment fitlers can be found here  

Dimensions: 

10.5” Wide 

4.5”   Deep 

9”   Tall 

Weight: 

6.5 LBS

 *Color of filter cap may vary*

Water Filter Spec Sheets 

Filter Replacement Guide 

 *Each Water Pump System is built to order. Please allow 10-15 days for order processing prior to shipping*

How you get water to your pump is important to the functionality and longevity of your pump system.

These pick up tubes shown fit the standard Hed Pak style 5 gallon water container. 

The standard connection on top is a 3/8 push fitting.

The tubing that can be used for this is 3/8 OD x 1/4 ID Polyethylene or Polyurethane. We do not recommend the use of Vinyl tubing as it is not approved for drinking water use.

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A custom designed stainless steel strainer finishes off the bottle of the pick up tube and keeps larger particles from traveling into the tube. 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container. This is so that you are less likely to pull air into the system if the water is run completely dry. 

Looking for 3/8" tubing, or install kits for Espresso machines, Sinks and more 

*Hedpak container not included 

----------------

Check out this quick video on the use of the pick up tube

 Looking for a Pick Up Tube for a standard 5 Gallon Water Tank

If you need a custom length please note required size in notes section during check out