The Caffewerks Connect Cube line is designed to redefine mobile water, filtration, and power distribution solutions. Leveraging our extensive experience in the mobile coffee and catering industry, we’ve refined our early designs to prioritize increased mobility and efficiency.
Hydro High Volume Connect Cube Overview:
The Hydro High Volume Connect Cube is an all-in-one water supply solution equipped with a powerful 3.2 GPM water pump paired with a 2-gallon accumulator tank to ensure a continuous water supply. Built into a custom, durable HDPE case, this system is engineered for reliability and convenience.
Key Features:
Dual-Stage Water Filtration: Includes a pre-sediment filter and carbon block filters to reduce taste and odor issues. Replacement filters are available for purchase.
Versatile Connectivity: The case is equipped with (1) quick-connect inlet, (4) filtered outlets, and (4) non-filtered outlets, all protected from bumps and jostles.
Integrated Power Strip: Features a built-in waterproof 110v power strip to power additional 110v devices.
Space-Saving & Portable: The stackable HDPE case design and built-in handle make transport and storage efficient. Stack it with our Connect Cube Portable Rinser for a complete setup.
Perfect for:
Catering, special events, trade shows, camping, and any environment where you need reliable water and power access. The Hydro High Volume Connect Cube easily supports multiple espresso machines, pitcher rinsers, and small sinks.
This system is awesome. We have been using it now for a couple weeks and it was so simple to set up and easy to use. It is really lightweight and is so far super dependable. This thing rocks!
Caffewerks Connect Cube: Mobile Water, Filtration, and Power Distribution System
The Caffewerks Connect Cube line is designed to revolutionize mobile water supply systems for coffee and catering professionals. With our deep industry experience, we’ve re-engineered our original mobile water pump systems for improved mobility and ease of use.
Key Features:
Modular & Versatile: Use the Connect Cubes independently or combine them for greater flexibility, depending on your setup.
Powerful Pump System: The Hydro Connect Cube includes a 1.5 GPM (gallons per minute) water pump with a 60 PSI rating, paired with a ½ liter accumulator tank for reliable water flow.
Durable & Stackable Design: Housed in a custom, stackable HDPE case with a built-in handle for easy transport. Quick-connect inlet and three outlets are securely positioned to withstand movement and impacts.
Efficient Space Management: Optional Connect Clips allow side-by-side configurations or stacking to optimize your workspace.
Ideal for:
One-group espresso machines
Pitcher rinsers
Small sink connections
Product Specifications:
Power: 110v / 3 amp
Pump: 1.5 GPM 60 PSI Diaphragm Pump
Accumulator Tank: ½ Liter
Connections: One ¼” quick-connect inlet & Three ¼” quick-connect outlets
Case: Durable HDPE Carry Case / Stackable Connect Cube
Dimensions: 5.5” W x 14” L x 11.5” H
Weight: 12 lbs (Hydro Cube)
What’s Included:
Install Kit for Espresso Machine
Install Kit for Rinser
7-Gallon Aquatainer Pick-Up Tube
Optional Add-On: Caffewerks Spinjet Mini Rinser
Additional Options:
Extra Install/Connection Kits: Available separately.
Water Pump Consulting: Starting at $55.00.
Note: Each system is built to order. Please allow 10 days for processing before shipping.
Elevate your mobile coffee operations with the Caffewerks Connect Cube—where convenience meets reliability.
The Caffewerks Connect Cube line is designed to revolutionize mobile water supply systems, offering flexibility and reliability for coffee and catering professionals. With years of experience in the industry, we've refined our early designs to create a system that enhances mobility and ease of use.
Key Features:
Modular Design: Use the Connect Cubes individually or together based on your setup needs.
Space-Saving & Portable: The unique stacking design and built-in handle make transport easy. Optional Connect Clips allow side-by-side configurations and stacking for efficient space management.
Comprehensive Filtration: Coffee is 98% water, and our filtration system is essential for protecting your espresso equipment and maintaining great coffee taste.
Dual-Filter Connect Cube:
The Dual-Filter Connect Cube uses a two-stage filtration process for high-efficiency water purification:
First Filter: A 2.5" Polypropylene Sediment Depth Filter that offers greater surface area for longer life and dirt holding capacity. It’s a cost-effective solution for pre-filtration, listed for food contact applications under Title 21 of the U.S. Code of Federal Regulations.
Second Filter: A carbon block cartridge that effectively reduces chlorine taste, odor, fine sediment, and cysts (such as giardia and cryptosporidium). This filter features a nominal 0.5-micron rating with a 2 GPM flow rate and is made entirely from FDA-compliant materials. NSF and FDA approved.
Ideal for:
Filtering water for espresso machines
Providing separate non-filtered outlets for devices like pitcher rinsers and sinks
Product Specifications:
Dimensions: 5.5” W x 14” L x 11.5” H
Weight: 12 lbs (Filtro Cube)
What’s Included:
18” connection for linking the Filtro Connect Cube to the Hydro Connect Cube
Filtration Features:
Reduces chlorine, taste, and odor
Filters cryptosporidium and giardia cysts
High capacity for chlorine reduction
Nominal 0.5-micron rating
Ideal for residential, food service, commercial, and industrial applications
Additional Options:
Standalone Install Kits: Available separately for Filtro Cube
The Caffewerks low volume / Home Panel water pump system with 1/2 liter accumulator is perfect for use with Rinsers, Single Group Espresso Machines in low volume situations and bulk brewing equipment and other equipment that does not require high volume pressure.
The system includes a 1.5 GPM x 60 PSI pump connected with a check valve to a 1/2 liter accumulator tank for better down line pressure and reduced pump cycling.
Creating a mobile coffee setup? Need help getting the right parts? We can help sort out exactly what pump system(s), tubing, connectors, and fittings you need to finish out your mobile coffee space.
This listing is for those who are brand new, and those who are ready to place an order, but have questions and want to make sure they've got exactly what they need to set up right out of the box.
Lean on our 30 years of experience in the mobile water space, specially for coffee, for advice, tips, tricks, and suggestions for everything you might need in and on your cart, van, truck, bus or table. What water heater is the best? How do I access power? Where do I find 30 gallon water tanks, etc
Call and email support $65.00 per 30 minutes.
Most sessions take around 30 minutes to learn about your project and needs, answer any questions and allow us to put together draft invoice/product suggestions to share.
New consulting calls are typically scheduled Tuesday - Thursday 10am - 3pm PST via google meet (if you would prefer a voice call with let us know)
*After your place your order for consulting, we will send you a questionnaire that will help us determine the best components to assemble. After our phone call we send a draft invoice that allows you to preview the system we suggest. If you like it all you need to do is click the payment link and we will get the process started by sending a questionnaire that will help us determine the best components to assemble.
If you need help putting a system together please email us info@caffewerks.com
They took a topic I knew nothing about and was fearful about and created ease and comfort. I am truly grateful and happy I used them for my mobile water system. Thank you!
C
Cristobal Colon
Owner
The time and all attentions where GREAT !!!
This people really knows their business… one of my best decisions to contact this company this year 😊👏👏🙏
E
Erik Pettee
Fantastic company, product and service.
Great product and expertise. I spoke with the owner by phone in a consulting call and they are the real deal.
Adding UV-C LED water purification to your build is as easy as installing the Filtro UV-C + Carbon System before the point of use.
UV-C LED and Carbon Block pre-filter combined for the perfect addition to your water pump system
Flow rates up to 8 LPM
Higher flow rates can be addressed with multiple units in parallel
Disinfection performance third party validated
Self-contained in one unit (reactor, light source, ballast, and controls)
State of the art UV-C LEDs with lamp life up to 10,000 hours
Highly configurable with water and electrical connections, cooling, and UV-C output power
Have total confidence in the water quality for your family, eliminating up to 99.9999% of bacteria and viruses. The 5" Carbon Block Pre-filter also provides for removal of:
Reduced chlorine, taste and odor
Effective filtering of cryptosporidium and
giardia cysts
High capacity chlorine reduction
Nominal 0.5 micron rating
Pre Mounted to a HDPE plastic mounting panel. Predrilled and ready for installation
Maintenance-free
Very low maintenance requirements & operates on-demand –only when water isflowing.
Low power consumption. The system is activated only when water is flowing, reducing power consumption by 90% compared to traditional other systems.
This panelized system allows for easy integration into any mobile water system.
The 1.4 GPM 12v pump pressurizes the system up to 40 PSI, and features a resettable low water feature. 3/8 push type fittings are used through out the system.
The UV-C LED water purification component provides:
Flow rates up to 8 LPM
Higher flow rates can be addressed with multiple units in parallel
Disinfection performance third party validated
Self-contained in one unit (reactor, light source, ballast, and controls)
State of the art UV-C LEDs with lamp life up to 10,000 hours
Highly configurable with water and electrical connections, cooling, and UV-C output power
Have total confidence in the water quality for your family, eliminating up to 99.9999% of bacteria and viruses. Our 6" Carbon Block Pre-filter, the system also provides for removal of:
Reduced chlorine, taste and odor
Effective filtering of cryptosporidium and
giardia cysts
High capacity chlorine reduction
Nominal 0.5 micron rating
Maintenance-free
Very low maintenance requirements & operates on-demand –only when water isflowing.
Low power consumption. The system is activated only when water is flowing, reducing power consumption by 90% compared to traditional other systems.
Stabilize water pressure for extractions is as important as the water being delivered to your machine.
If you have water pressure fluctuation problems this kit will help stabilize the line pressure and regulate that pressure to 30 PSI to take advantage of low flow pre-infusion on machines capable of pre-infusion.
Line stabilization helps when the guy next door turns on the water and your espresso machine water pressure drops during a shot. Stop ruining otherwise great shots of espresso with this kit.
This kit allows our baristas to focus on fine tuning during morning dial in as opposed to completely redialing the shot due to pressure build up over night.
Water System Pick Up Tube for 5 Gallon Water Bottle
How you get water to your pump is important to the functionality and longevity of your pump system. We designed these pick up tubes as a solution for anyone looking to move water from a tank with ease.
These pick up tubes shown fit a standard 5 gallon water container/ jug but we can create any length you might need.
*The 5 Gallon Pick Up Tube comes with a blue cap on the top that fits most standard 5 gallon water bottles. Please note, the cap does not seal or create a water tight fit, it is designed to sit gently on top of the water jug to keep out debris. This cap does not fit threaded or glass bottles
A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A *NEW* slim fit stainer on the end allows for an easy installation!
The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container, his is designed in an effort to keep settled debris from clogging your inlet screen
Total length of Pick Up Tube is approximately 20" - depth of pick up tube into container can be controlled by adjusting placement of lid.
We run a small café service for a church called Overflow Café. You guys were super helpful with the supplies as I needed it last minute as well, thank you.
- Dan
B
Brian Galvan
Water System Pick Up Tube for 5 Gallon Water Bottle
Water System Pick Up Tube for 5 Gallon Water Bottle is another quality component from Caffewerks! I trust the craftsmanship of all their components for our mobile coffee operations. Customer support is always phenomenal for any of their products when you have questions.
H
Holly Schmidt
Water System Pick Up Tube for 5 Gallon Water Bottle
How you get water to your pump is important to the functionality and longevity of your pump system.
These pick up tubes shown fit the Reliance Auqatainer 7 gallon, 4 Gallon or 7 Gallon Jumbotainer 2.0 water containers but we can create any length you might need.
The standard connection on top is a 3/8 push fitting.
The tubing that can be used for this is 3/8 OD x 1/4 ID Polyethylene or Polyurethane. We do not recommend the use of Vinyl tubing as it is not approved for drinking water use.
A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A custom designed stainless steel strainer finishes off the bottle of the pick up tube and keeps larger particles from traveling into the tube.
The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container. This is so that you are less likely to pull air into the system if the water is run completely dry.
Really happy with the way the pickup tube is working. It was so easy to setup. Staff was even kind enough to help me troubleshoot some other components of my system that didn't come from them.
T
Thomas Oakley
As advertised
Good quality build, but I ordered the wrong one :( meant to grab the 7gallon but must have hit the wrong button. Seems well built though!
M
Matthew Sprouls
Excellent Product
Tube assembly arrive in perfect shape.
The product has exceeded my expectations.
Highly recommend if you are trying to build out a coffee machine water supply.
A small zip tie is perfect to lock the cone into position once you get everything setup.
T
TJ
Works perfectly!
The tube does exactly what it's supposed to do. It really cleaned up my water set up in the back of my 4Runner. I'm usually off-roading when I'm using it and spitted the bottom pice to keep it clocked in the aquatainer top and it works perfectly. Great solution to connect to your 12v pump hose!
N
Nancy K
I love love love these!
I actually designed the plumbing system for my van conversion around these I liked them so much (bought 1 extra just to have). I would have purchased a whole package (including pump) from you if I hadn't already installed a pump but I think you system works beautifully for a van conversion. My plumbing system looks so cool and professional!
I was very pleased with how Caffewerks fixed my Accumalater and Pump along with adding brand new Quick Connection Fittings, which has my Coffee Cart running smoothly!
H
Heather Lyles
Quick Connection Fittings
J
Joe DiFulgentis
Works great
I used this for a faster disconnect from a dip tube placed inside a 7 gallon water tank when I need to refill the tank. No leaks and easy to use. Great customer service as well!
The Hydronix ICF-10Q38 inline filter features 3/8" Quick-Connect fittings that allow for installation and replacement in a matter of seconds without the use of tools.
A simple solution for inline filtration running to your espresso machine or water tap. 3/8"Push Fit fittings compatible with all Caffewerks Water Pump Systems.
This Accumulator Tank is intended for installation in any pumped water system controlled by a pressure switch. For example, most pressure pumps as found in boats, RV's, motor caravans, coaches and similar applications.
The Accumulator Tank smooths water flow and reduces on/ off cycling of the pump by lessening the variation in pressure and flow between the pump and the outlets in the system. The even flow of water gives better control of hot water temperature especially noticeable with instantaneous gas water heaters and with showers. Reduces on/off cycling, reduces noise from the pump motor, and from shock pressures (water hammer). It also reduces battery drain from current spikes.
When used with a one way valve the system can provide steady down line pressure. We recommend using accumulator with all water pump applications. How large of a tank is determined by use requirements.
2 gallon 1/2" Female NPT Custom wall Brackets included Max Liquid Pressure: 130 PSI Pre-Pressurized Air: 30 PSI
Adding UV-C LED water purification to your build is as easy as installing the Filtro Azul device before the point of use.
Flow rates up to 8 LPM
Higher flow rates can be addressed with multiple units in parallel
Disinfection performance third party validated
Self-contained in one unit (reactor, light source, ballast, and controls)
State of the art UV-C LEDs with lamp life up to 10,000 hours
Highly configurable with water and electrical connections, cooling, and UV-C output power
Have total confidence in the water quality for your family, eliminating up to 99.9999% of bacteria and viruses. When used with our 5" Carbon Block Prefilter, the system also provides for removal of:
Reduced chlorine, taste and odor
Effective filtering of cryptosporidium and
giardia cysts
High capacity chlorine reduction
Nominal 0.5 micron rating
Maintenance-free
Very low maintenance requirements & operates on-demand –only when water isflowing.
Low power consumption. The system is activated only when water is flowing, reducing power consumption by 90% compared to traditional other systems.
Using a Caffewerks Dual Stage Water Filter System on an espresso machine can have several benefits:
Improved taste: Water filters can remove impurities such as chlorine, sediment, and minerals that can affect the taste of your espresso. By removing these impurities, the water used to make your espresso will taste cleaner and less harsh.
Increased lifespan of the machine: Minerals in hard water can build up and damage the internal components of an espresso machine over time. Using a water filter can reduce the mineral buildup and extend the lifespan of your machine.
Better performance: By reducing mineral buildup, a water filter can help maintain the optimal water pressure and temperature for making espresso. This can result in a more consistent and better-quality espresso.
Easier maintenance: A water filter can help reduce the amount of maintenance required for your espresso machine. By reducing mineral buildup, you may need to descale your machine less frequently.
Overall, using a water filter on your espresso machine can improve the taste and quality of your espresso, extend the lifespan of your machine, and reduce the amount of maintenance required.
Coffee is 98% water and filtration is the best way to protect your espresso equipment, and clean water is also the best way to keep your coffee tasting great.
The Caffewerks Dual Panel is a sediment pre-filter to ensure that the secondary carbon block filter will last longer.
1. The first filter is a High Efficiency 2-1/2" Polypropylene Sediment Depth Filter, which is a reliable and economical solution for pre-filtration in many applications. The 2-1/2" sediment depth filter offers greater surface area for longer life and greater dirt holding capacity. The filters are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.
2. TheSecond filter is a carbon block cartridge that is highly effective at reducing chlorine taste and odor from potable drinking water. The unique structure of the carbon block enables it to reduce giardia, cryptosporidium and other cysts and fine sediment particles down to 0.5 microns. The filter is manufactured entirely from FDA-compliant materials. NSF and FDA Approved.
Features:
Reduces chlorine, taste and odor
Effective at filtering cryptosporidium and
giardia cysts
High capacity chlorine reduction
Nominal 0.5 micron rating
Made entirely of FDA-approved materials
Ideal choice for a wide range of residential, food service, commercial and industrial applications
Best Practice is to replace the filters twice a year, about every 6 months.
How you get water to your pump is important to the functionality and longevity of your pump system.
These pick up tubes shown fit the standard Hed Pak style 5 gallon water container.
The standard connection on top is a 3/8 push fitting.
The tubing that can be used for this is 3/8 OD x 1/4 ID Polyethylene or Polyurethane. We do not recommend the use of Vinyl tubing as it is not approved for drinking water use.
A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A custom designed stainless steel strainer finishes off the bottle of the pick up tube and keeps larger particles from traveling into the tube.
The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container. This is so that you are less likely to pull air into the system if the water is run completely dry.
These quick connection fittings make removal of equipment and devices easy.
These Push Fit 3/8” x Quick Connect are made of rugged FDA approved Acetal Plastic. Each connector has a built in check valve so no water is lost during disconnected transport. Each kit includes one female and one male quick connect.
Available as individual Male and Female parts as well.
Easy installation just like all of our push fittings.