What Water Filtration System Does a Coffee Shop Need?
Short answer: most coffee shops need two stages of filtration on the line that feeds the espresso machine: a sediment filter, then a carbon block filter. Together they take out sediment, chlorine, and the tastes and odors that change espresso. Neither stage softens hard water, so check your water's hardness before you buy.
What a coffee shop water filter has to do
Coffee is 98% water, so the filter on your line protects both the drink and the machine. Chlorine and sediment change the taste of espresso. Hard water leaves scale inside boilers, valves and pumps.
The water targets to aim for
- Total dissolved solids (TDS): around 150 ppm, the Specialty Coffee Association target.
- Hardness: roughly 50 to 100 ppm (3 to 6 grains per gallon).
Water that is too soft can taste flat and be corrosive. Water that is too hard scales the machine. Our guide to which water you can use in an espresso machine covers hardness, pH and chlorine in more detail.
Choose a filter by how your water arrives
| Your setup | Filter | What it does |
|---|---|---|
| Cafe bar or panel-mounted pump system | Caffewerks Dual Stage Water Filter System | Sediment and carbon block stages in fixed housings. |
| Mobile coffee cart or trailer running from tanks or jugs | Connect Cube Filtro | A 2.5" polypropylene sediment depth filter, then a carbon block cartridge rated to 0.5 micron. Stacks with the Connect Cube Hydro pump. |
| A single line to one machine or tap | Hydronix ICF-6Q38 6" inline filter | Coconut-shell carbon, 5 micron, 1,000 gallon capacity, NSF Standard 42. 3/8" push-fit ends. |
| 1/4" lines, ice makers and drink dispensers | Aqua-Pure IL-IM-01 | 5 micron, 0.5 GPM, rated for 6 months or 2,500 gallons. |
See every option in water filtration systems for coffee shops and espresso machines.
What sediment and carbon filters do not do
They do not remove the calcium and magnesium that make water hard. If your water tests hard, a sediment and carbon system alone will not stop scale. Message us before you buy and we will help you plan for it.
Installing a filter on a Caffewerks pump system
Caffewerks pump systems use 3/8" push-fit tubing, and the Filtro, the Dual Stage system and the Hydronix inline filter all connect to it. The filter goes on the line between the pump and the espresso machine. After you install it, slowly open the valve at the filter outlet to release air, then flush at least half a gallon of water to clear carbon particles. The water pump system install guide walks through each step.
When to change the cartridges
- Follow the rating on each filter: the Hydronix inline filter is rated for 1,000 gallons, and the Aqua-Pure IL-IM-01 for 6 months or 2,500 gallons.
- Change any cartridge sooner if flow drops or the chlorine taste comes back.
- The Filtro and the Dual Stage system use the same sediment and carbon block replacement cartridges. The filter replacement guide covers shutting off the water, relieving pressure and seating the O-ring.
Coffee shop water filtration FAQ
Do I still need a filter if my espresso machine has its own pump?
Yes. The pump moves water. It does not clean it. Filtration protects the machine whatever pump feeds it.
Does a carbon filter soften hard water?
No. Sediment and carbon filters reduce sediment, chlorine, taste and odor. They do not remove hardness minerals.
Which filter do I need for a mobile coffee cart?
Most carts use the Connect Cube Filtro, because it sits next to the Connect Cube pump and travels with the cart. If your pump is panel mounted, the Dual Stage Water Filter System does the same job in fixed housings.
Will these filters connect to my Caffewerks water pump system?
Yes. The Filtro, the Dual Stage system and the Hydronix inline filter all use the same 3/8" push-fit connections as Caffewerks pump systems.
Leave a comment