Espresso Machine Gasket, Shower Screen and Screw Fit Guide by Brand
Short answer: Match the part to your machine's brand and group, then confirm it against your old gasket's size. The table below lists every Caffewerks gasket, shower screen and group screw whose product page names a machine brand, each linked to the product. Caffewerks' commercial group gaskets range from 6mm thick for La Marzocco style groups to 9mm for Nuova Simonelli and Cimbali.
Which gasket, shower screen and screws fit my espresso machine?
Find your brand in the table. Each cell lists the Caffewerks part whose product page says it fits that brand or group. A blank cell means no Caffewerks product page states a fit for that brand yet, so ask before ordering.
Gasket sizes are shown as outer diameter x inner diameter x thickness, as Caffewerks lists them.
| Machine brand / group | Group gasket (size, color) | Shower screen | Screen + gasket kits | Group screw |
|---|---|---|---|---|
| La Marzocco / Slayer (screens also list Synesso) |
6mm La Marzocco style, red: 72 x 55 x 6.35mm. Fits La Marzocco, Slayer and Mavam. 8mm oversize La Marzocco style, magenta: 72 x 55 x 8.7mm. For older group bayonets and portafilters. May be too thick for newer machines. |
BaristaFlo Precision La Marzocco / Slayer style screen (La Marzocco, Slayer, Synesso) IMS Precision MA 200 IM (Carimali, La Marzocco, Slayer, Synesso) E&B Labs Nanotech screen (La Marzocco, Synesso, Slayer) |
BaristaFlo La Marzocco / Mini Linea / Slayer 2-pack, 6mm standard or 8mm oversized. The 6mm kit fits the Linea Mini and the Micra. IMS Precision screen with 6mm gasket E&B Labs screen with 6mm gasket E&B Labs screen with 8.5mm gasket // Synesso |
Group head screw // La Marzocco / Slayer |
| Synesso | 8.5mm, yellow: 73 x 57 x 8.5mm. Lists Synesso. |
BaristaFlo Precision La Marzocco / Slayer style screen IMS Precision MA 200 IM E&B Labs Nanotech screen (each lists Synesso) |
E&B Labs screen with 8.5mm gasket // Synesso | |
| Nuova Simonelli / Victoria Arduino |
9mm conical, blue: 71 x 56.5 x 9mm. Fits most Simonelli, Victoria Arduino and Cimbali machines. 7mm flat (straight side), purple: 72 x 58 x 7mm. For Simonelli Appia. |
BaristaFlo Precision Nuova Simonelli style screen IMS Precision SI200IM (Nuova Simonelli, Victoria Arduino, Mavam) |
BaristaFlo Nuova Simonelli 2-pack: conical for most NS machines, straight for Appia IMS Precision screen with 9mm gasket |
Countersunk flat head screws // Nuova Simonelli: 6mm x 1.0mm x 16mm (frequently fits Appia, Aurelia) or x 20mm (frequently fits Appia, Aurelia, Musica, Oscar) |
| Cimbali | 9mm conical, blue: 71 x 56.5 x 9mm. Fits most Cimbali machines. Same gasket as the Nuova Simonelli 9mm. |
IMS Precision CI 200 IM IMS Nanotech CI200 NT IMS Wire Mesh CI35 WM (each lists La Cimbali) |
||
| Rancilio | 8.4mm Rancilio, green: 74 x 58 x 8.4mm. Fits all Rancilio models including the Silvia, and New Wega models from 2019 on. | Sold in kits (next column) |
IMS Precision Rancilio screen and gasket kit. Screen does not fit the Rancilio Plus. IMS / E&B Lab Rancilio screen and gasket kit. Screen does not fit the Rancilio Plus or Silvia Pro X. |
|
|
Faema E61 and other E61 groups Faema owners: check whether your machine has an E61 group. If it doesn't, see the Cimbali row, whose IMS screens also list Faema. |
8mm Faema E61, orange: 73 x 57 x 8mm. Lists Rocket, Faema, Wega, Brasilia, Bezzera, Expo Bar, ECM Technika V, Gaggia, Iberital, Isomac, IZZO, Lelit Bianca and Mara, Orchestrale, Profitec, Quickmill, Synesso, Pasquini Livia 90 / G4. 8.5mm E61, yellow: 73 x 57 x 8.5mm. Lists Brasilia, Bezzera, Expo Bar, ECM, Faema, Gaggia / Gaggia Classic, Isomac, IZZO, Orchestrale, Profitec, Rocket, San Remo, Quickmill, Synesso. 7.5mm Bezzera / Pasquini, red/orange: 73 x 57 x 7.5mm. Works with thicker-rimmed baskets. |
BaristaFlo Precision E61 screen (most E61 groups; does not fit Gaggia Classic) IMS Precision Flow E61 (all E61 groups) IMS Nanotech E61 (all E61 groups) E&B Labs E61 200 RNT Nanotech (all E61 groups, Kees van der Westen, San Remo) |
BaristaFlo E61 2-pack, 8mm orange or 8.5mm yellow IMS Precision Flow E61 screen with 8mm or 8.5mm gasket IMS Nanotech E61 screen with 8mm or 8.5mm gasket E&B Lab E61 Nanotech screen with 8mm or 8.5mm gasket |
|
| Rocket | 8mm orange or 8.5mm yellow E61 gaskets (both list Rocket; see the E61 row) | E61 screens (the BaristaFlo E61 screen lists Rocket; see the E61 row) | IMS CI35WM screen with 8mm gasket. Fits Rocket Boxer, most Rocket commercial machines, Profitec 300 and Profitec Go. The screw is no longer included; order the Rocket group screw separately. | Group head screw // Rocket Commercial / Rocket Boxer: M5 x 12 (5mm x 0.8mm x 12mm) |
| Lelit (Bianca, Mara) | 8mm Faema E61, orange lists Lelit Bianca and Mara | E61 screens (see the E61 row). Caffewerks' E61 post names the Lelit Bianca as an E61 machine. | E61 kits (see the E61 row) | |
| La Spaziale | 6.3mm La Spaziale, red: 64 x 52 x 6.3mm. Fits all La Spaziale models. Same gasket as the 6.3mm Lucca A53. | None currently | ||
| Lucca (A53) | 6.3mm Lucca A53, red: 64 x 52 x 6.3mm. Fits Lucca A53 and La Spaziale. | None currently | ||
| Gaggia | 8.5mm yellow E61 gasket lists Gaggia / Gaggia Classic (see the E61 row) | The BaristaFlo E61 screen does not fit the Gaggia Classic. Use the kit. | IMS Gaggia screen and 8.5mm gasket kit. Fits Gaggia Classic, Classic Pro, Carezza, Baby models, Gaggia Espresso, Tebe and Paros, and the KitchenAid Pro Line dual boiler. | |
| Mavam |
6mm La Marzocco style, red: 72 x 55 x 6.35mm 8mm oversize, magenta: for older or worn gear |
IMS Precision SI200IM (lists Mavam) | IMS Precision screen with 6mm gasket // Mavam. Includes the screen, gasket and a new group screw. | Group head screw // Mavam: 5mm x 0.8mm x 20mm |
| Breville 54mm (800 series) | Breville 54mm silicone brew gasket. Fits Barista Express (BES870XL, BES860XL), Infuser (BES840XL), Duo-Temp (BES810BSS), Bambino Plus and Bambino. |
BaristaFlo 54mm screen. Fits Barista, Bambino Plus, Infuser, Duo Temp Pro. Not compatible with Barista Pro, Touch or Touch Impress. IMS Breville / Sage precision screen. Fits Barista, Bambino, Bambino Plus, Infuser, Duo Temp Pro. |
800 series gasket and 54mm BaristaFlo screen 800 series upgrade kit (screen, gasket and 54mm puck screen) |
Breville 54mm group screws // 800 series: 5mm x 0.8mm x 10mm |
| Breville 58mm (900 series) | Breville 58mm silicone brew gasket. Fits Dual Boiler (BES900XL, BES920XL) and Oracle (BES980XL). | IMS CI 200 IM, CI200 NT and CI35 WM. Each lists BES900XL, BES920XL, BES980XL, BES990 and Oracle Dual Boiler. |
900 series gasket and IMS screen 900 series gasket and IMS Nanotech screen |
Two more parts that aren't brand-specific: paper shim gaskets (0.5mm or 0.8mm, fit most 58mm gaskets) raise the gasket's profile when a worn portafilter locks in past the six o'clock position. Countersunk group screws come in 5mm x 0.8mm thread at 10, 12, 16, 18 and 20mm lengths. Match yours by measuring the old screw.
How do I confirm the fit before I order?
Check your machine's brand and model, then measure the old gasket and compare it to the sizes in the table. If any number doesn't match, contact Caffewerks before ordering.
- Find the brand and model. On Breville machines, the series matters: 54mm fits 800 series machines, 58mm fits 900 series machines, and 50mm fits some older 800 series machines.
- Check the group type. Dozens of manufacturers use the E61 group. If your group is E61, use the E61 row even if your brand isn't listed. Faema parts appear in both the E61 and the Cimbali-style screen lists, so Faema owners should check this first.
- Remove the old gasket and measure it. Measure the outer diameter (OD), the inner diameter (ID) and the thickness in millimetres. Compare them with the sizes in the table.
- Note the profile. Some gaskets are conical and some are flat. The Nuova Simonelli 2-pack, for example, comes conical for most NS machines and straight for the Appia.
- Check where your portafilter locks. Caffewerks' 6mm La Marzocco style gasket is described as landing the portafilter at six o'clock on newish gear. If yours swings well past six o'clock, an oversize gasket or a paper shim may be the fix. If you're not sure, ask.
- Read the "does not fit" notes. Several screens list exceptions, such as the Gaggia Classic, Rancilio Plus, Silvia Pro X and some Breville models.
What is the difference between the 6mm and 8mm La Marzocco style gaskets?
Thickness. The 6mm red gasket is the standard fit. The 8mm oversize magenta gasket is for older group bayonets and worn portafilters.
Caffewerks lists the 6mm gasket at 72mm OD x 55mm ID x 6.35mm. It has 6mm of thickness where the basket lands and an 8mm conical section that sits inside the basket for an extra seal. The oversize version measures 8.7mm thick. Its page warns it may be too thick for newer machines. Both list La Marzocco, Slayer and Mavam.
Which E61 gasket do I need: 7.5mm, 8mm or 8.5mm?
All three share the same 73mm x 57mm diameter, so thickness is what you choose. Measure your old gasket and match it.
The product pages list different brands for each thickness, as shown in the table. The 7.5mm gasket lists Pasquini Livia 90 / G4 and Bezzera, and its page says it works well with modern, thicker-rimmed baskets. For background on the group itself, read Let's learn more about the E61 group head, or shop the E61 collection.
Do I need new group screws?
If your old screw is damaged or missing, match the replacement to your brand. Caffewerks lists group screws for La Marzocco / Slayer, Nuova Simonelli, Rocket, Mavam and Breville 54mm machines.
When you fit a new Breville 54mm screen, don't over-tighten the screw. Caffewerks' screen pages warn this can warp the screen and cause channeling. All screws are in the screws collection.
What if I order the wrong part?
Confirm the fit first, because espresso machine parts are not returnable but may be exchanged if defective or damaged in shipping. If you're unsure, send Caffewerks your machine model and the old gasket's measurements before ordering.
Gasket and shower screen fit FAQ
Where can I buy replacement gaskets and shower screens for a commercial espresso machine?
Caffewerks sells silicone group gaskets, shower screens, screen and gasket kits, and group screws for the brands in the table above. Start with the gaskets and shower screens collections.
What size gasket does a La Marzocco take?
Caffewerks' La Marzocco style gasket is 72mm OD x 55mm ID x 6.35mm, sold as 6mm, and the 6mm BaristaFlo screen and gasket kit fits the Linea Mini and Micra. An 8mm oversize version is available for older groups. More La Marzocco parts are in the La Marzocco collection.
Does the same gasket fit Nuova Simonelli and Victoria Arduino?
Yes. Caffewerks' 9mm blue conical gasket (71 x 56.5 x 9mm) lists most Nuova Simonelli, Victoria Arduino and Cimbali machines. The Simonelli Appia uses the 7mm flat purple gasket instead.
What gasket does a Synesso take?
The 8.5mm yellow gasket (73 x 57 x 8.5mm). Caffewerks also sells an E&B Labs screen and 8.5mm gasket kit for Synesso.
Which Breville gasket do I need?
Check your series. 800 series machines take the 54mm gasket and 900 series machines take the 58mm gasket. Some older 800 series machines use 50mm. If your Breville still leaks after a new gasket, see Breville gasket troubleshooting and the Breville collection.
My brand isn't in the table. Can Caffewerks still help?
Possibly. If your machine has an E61 group, use the E61 row. Otherwise, contact Caffewerks with your machine model and the old gasket's measurements.
Found your fit? Shop group gaskets and shower screens, or ask Caffewerks to confirm the part for your machine.
Sources
- Caffewerks gaskets collection and product pages (sizes, colors and listed fits): https://caffewerks.com/collections/gaskets
- Caffewerks shower screens collection and product pages (listed fits and exclusions): https://caffewerks.com/collections/shower-screens
- Caffewerks screws collection and product pages (thread sizes and listed fits): https://caffewerks.com/collections/screws
- Caffewerks, Breville Gasket Troubleshooting (50mm, 54mm and 58mm by series): https://caffewerks.com/blogs/news/breville-gasket-troubleshooting
- Caffewerks, Let's learn more about the E61 Group Head (Lelit Bianca as an E61 machine): https://caffewerks.com/blogs/news/lets-learn-more-about-the-e61-group-head
- Caffewerks, paper shim gasket product page: https://caffewerks.com/products/paper-shim-gasket-10-pack
Leave a comment