Baskets, Gaskets, Screen and Screws
Ship free over $15 in USA
19 products
Push Fit 3/8" Tube Union Tee
A 3/8" Tube three-way union tee.
*manufacturer may vary*
Email or fill out question box below with any questions
Snip. Snip. Click. Click. Click. and my second machine was up and running. So easy. So efficient. Cheers-
Push Fit 3/8" Tube Shut-Off Valve - Polypropylene
Push Fit connector shut-off valve. The working pressure is 0 to 150 psi and the working temperature is 33° F to 140° F. These valves are not for use with compressed air, explosive gases, petroleum spirits and other fuels, or for heating systems. The O-ring material is EPDM.
*manufacturer may vary*
Email or fill out question box below with any questions
Pricy yet necessary
Push Fit 3/8" Tube Shut-Off Valve - Polypropylene
Push Fit 3/8" Tube X 9/16" Male UNEF - Black 3/8 Compression Adapter // GS3 braided line to 3/8 tubing fitting
If you are installing your La Marzocco GS3 or Linea Mini using 3/8" beverage tubing this fitting will adapt the hose on your espresso machine to 3/8" beverage tubing.
These fittings are designed for fluid applications where risk of chemical attack and/or leak resistance is of concern.
Exactly what I needed to hook up my water line to my sink on my coffee cart.
If you're looking to hook up a pitcher rinser or sink faucet in a coffee cart, this is the piece you haven't been able to find at any hardware store, plumbing store, etc. It took me forever to realize that this was the one thing I was missing. If you're hooking up a Flojet (or similar), you'll bring the 1/4" tube to the 3/8" tube with another adapter piece, then the 3/8" tube to this so that it connects to the rinser/sink line. Don't hesitate - buy it now so you can finish your project sooner!
This works perfectly with my GS3 plumbed in. Thanks Caffewerks for the quick and easy recommendations.
After searching high and low to find an adapter for the water line on a La Marzocco GS3, this was the one part we needed to connect it to a pex water line for using with the Simple Cart System. Additionally, many RO water systems use pex tubing in this size, so going back and forth between portable cart mode and in-line water is a breeze.
I had such trouble finding a John Guest Push Fit accessory to fit my waterline connected to my La Marzocco Espresso Machine. After numerous emails and many purchases from other companies, I was super thankful for Zachary and his diligence in leading me directly to what I needed. Very pleased!
Push Fit 3/8" Tube x 1/2" NPT
Connect and disconnect tubing without tools. Meets FDA standards & NSF listed. O-ring/collet design. Body is polypropylene, O-rings are EPDM. Collet is polypropylene with stainless steel teeth. Max 150 PSI @70°F, 60 PSI at 140°F. Working Temp: 33°F to 140°F. Will withstand a full vacuum. Use fittings with rigid tubings. Tube-to-hose stems and elbows let you use soft tubing. Create rotating swivel connections by connecting special stem adapters with male pipe threads together. White in color.
*manufacturer may vary*
Email or fill out question box below with any questions
Push Fit 3/8" Tube x 3/8" Male BSP // Most standard espresso machine braided line to 3/8 tubing
This fitting will allow the connection of most standard espresso machines using 3/8 BSP braided steel hose to be connected to 3/8 beverage tubing.
3/8" Tube x 3/8" BSP Connector Acetal
*manufacturer may vary*
Email or fill out question box below with any questions
Rinser Connection Fitting Push Fit 3/8 tube x 1/2 BSP 90 Angle Elbow
This pitcher rinser connection fitting is Push Fit 3/8 tube x 1/2 BSP 90 degree elbow.
That elusive piece that you can’t buy at the hardware store.
If you are installing a rinser in a low profile setting this helps get it done.
Looking for the straight version of the rinser fitting?
Push Fit 3/8" Tube X 1/2" Female BSPP
*manufacturer may vary*
Email or fill out question box below with any questions
I got everything I ordered on time. Will order again.
Push Fit 3/8" Tube X 1/4" Flojet Fitting
Flojet Poly Tube Fitting 1/4"port x 3/8 tube
These fittings work with the Flojet LF and Bevjet series pumps 1/4 port x 3/8 tube
*manufacturer may vary*
Email or fill out question box below with any questions
Caffewerks was the only place I could find the Flojet 1/4 inch to JG 3/8 tube fitting. Arrived fast and did what I needed it to do. I was plumbing a small RV water system the used John Guest fittings after the pump.
Push Fit 3/8" tube X 3/8" Flare Female Connector
Push Fit Female Adapter Flare - 3/8 tube x 3/8 Flare
This is the connector you need when installing a coffee brewer with a 3/8 Male Flare fitting.
Complete installation kits are also available here.
*manufacturer may vary*
Email or fill out question box below with any questions
Push Fit 3/8" Tube X 3/8" Stem Elbow - Black
3/8" TUBE X 3/8" STEM ELBOW-BLACK
*manufacturer may vary*
Email or fill out question box below with any questions
Push Fit 3/8" Check Valve, Red Collet
3/8" MUR-LOK CHECK VALVE, RED COLLET
*manufacturer may vary*
Email or fill out question box below with any questions
Push Fit 3/8" Check Valve - Black, Red Collet
0.3 cracking pressure 3/8 tube check valve.
Use before pitcher rinsers, sinks, espresso coffee machines.
Use between pumps and accumulators.
*manufacturer may vary*
Email or fill out question box below with any questions
Push Fit 3/8" Tube X 3/8" Male NPTF-Black
*manufacturer may vary*
Email or fill out question box below with any questions
Push Fit 3/8" Tube 2-Way Divider - Black
*manufacturer may vary*
Email or fill out question box below with any questions
Push Fit 3/8" TUBE X 1/4" TUBE UNION
Adapt 1/4 tube to 3/8 tube
*manufacturer may vary*
Email or fill out question box below with any questions
Push Fit 3/8" Tube X 1/2" Male NPTF
3/8" TUBE X 1/2" MALE NPTF
*manufacturer and color may vary*
Email or fill out question box below with any questions
Push Fit 3/8" Tube X 3/4" Female Garden Hose Thread
Connect from 3/4 Garden hose thread connections to 3/8 beverage tubing.
*manufacturer may vary*
Email or fill out question box below with any questions
Push Fit 3/8" Tube X 7/16"-24 UNS
3/8" TUBE X 7/16"-24 UNS connects to faucet threads on single tap faucets.
*manufacturer may vary*
Email or fill out question box below with any questions
Push Fit 3/8" Tube Stem Run Tee
A 3/8" Tube Stem Run Tee.
Email or fill out question box below with any questions
