Filter
- 1/2
- 1/4
- 3 way
- 3/8
- 3/8 bsp
- 3/8 check valve
- 3/8 Compression
- 3/8 GAM
- 3/8 push fit
- 30 psi regulator
- 7/16"-24 UNS
- 9/16 UNEF
- accumulator
- adapter
- angle stop
- angle stop adapter
- beer glass
- black check valve
- blender rinser
- blue hose
- bottled water pump
- braided line
- bw5000
- cart water pump
- check valve
- coffee brewer
- coffee cart
- colder
- connection kit
- connection manifold
- CPC
- elbow
- elbow fitting
- espresso machine
- ez
- ez angle stop
- fitting
- fittings
- flare
- flojet
- glass rinser
- gs3
- healthdepartmentapproved
- hydronix
- inline filter
- install kit
- john guest
- la marzocco
- lamarzocco
- line pressure
- linea
- marzocco
- mini linea
- minilinea
- mobile water
- murdock
- nsf
- nsf approved
- pitcher rinser
- pitcher rinser parts
- pressure
- pressure profiling
- pressure reducer
- pressure regulator
- push
- push fit
- push fitmurdock
- push fitting
- quad port
- quick connect
- quick connections
- quick release
- rinser
- rinser parts
- simple cart system
- simple cart systems
- simple display cart
- simplecart
- simplecartsystems
- spo-default
- spo-disabled
- stem elbow
- tee
- temporary water system
- three way
- tube
- tube fitting
- tube push fitting
- union tee
- valve
- water
- water pressure
- water pump
- water pump system
- water system
- water tube
- 1/2
- 1/4
- 3 way
- 3/8
- 3/8 bsp
- 3/8 check valve
- 3/8 Compression
- 3/8 GAM
- 3/8 push fit
- 30 psi regulator
- 7/16"-24 UNS
- 9/16 UNEF
- accumulator
- adapter
- angle stop
- angle stop adapter
- beer glass
- black check valve
- blender rinser
- blue hose
- bottled water pump
- braided line
- bw5000
- cart water pump
- check valve
- coffee brewer
- coffee cart
- colder
- connection kit
- connection manifold
- CPC
- elbow
- elbow fitting
- espresso machine
- ez
- ez angle stop
- fitting
- fittings
- flare
- flojet
- glass rinser
- gs3
- healthdepartmentapproved
- hydronix
- inline filter
- install kit
- john guest
- la marzocco
- lamarzocco
- line pressure
- linea
- marzocco
- mini linea
- minilinea
- mobile water
- murdock
- nsf
- nsf approved
- pitcher rinser
- pitcher rinser parts
- pressure
- pressure profiling
- pressure reducer
- pressure regulator
- push
- push fit
- push fitmurdock
- push fitting
- quad port
- quick connect
- quick connections
- quick release
- rinser
- rinser parts
- simple cart system
- simple cart systems
- simple display cart
- simplecart
- simplecartsystems
- spo-default
- spo-disabled
- stem elbow
- tee
- temporary water system
- three way
- tube
- tube fitting
- tube push fitting
- union tee
- valve
- water
- water pressure
- water pump
- water pump system
- water system
- water tube
8 products
8 products
Push Fit 3/8" 30 PSI Pressure Regulator
No reviews
/
Shipping calculated at checkout.
**Back Order - Shipping September 2024**
These regulators work well with all of our pitcher rinser products and can be used inline before most any coffee brewing equipment.
By maintaining a consistent and controlled water pressure, a pressure regulator helps prevent damage to plumbing fixtures, appliances, and pipes due to excessive pressure. It ensures a steady flow of water throughout the system, promoting efficient operation and prolonging the lifespan of the components.
This water pressure regulator is designed to control and maintain water pressure in a plumbing system. It specifically operates within a range of 30 pounds per square inch (PSI), which is equivalent to approximately 0.2-0.3 megapascals (MPa).
This water pressure regulator is equipped with 3/8 push fittings, which are a type of quick-connect fitting we use in all our systems
By maintaining a consistent and controlled water pressure, a regulator helps prevent damage to plumbing fixtures, appliances, and pipes due to excessive pressure. It ensures a steady flow of water throughout the system, promoting efficient operation and prolonging the lifespan of the components.
In the case of this specific water pressure regulator, it is designed to operate within a range of 0.2-0.3 MPa, which corresponds to approximately 30 PSI. This means that the regulator will aim to keep the water pressure within this range, adjusting as necessary to ensure the pressure remains consistent and within the desired limits.
Quick Connection Fittings
7 reviews
/
Shipping calculated at checkout.
These quick connection fittings make removal of equipment and devices easy.
Four inches of 3/8 OD tubing is provided on each connector. Each kit includes one female and one male quick connect.
Easy installation into our push fittings.
B
Benjamin Cox Quick Connection Fittings
A
Antonio I was very pleased with how Caffewerks fixed my Accumalater and Pump along with adding brand new Quick Connection Fittings, which has my Coffee Cart running smoothly!
H
Heather Lyles Quick Connection Fittings
J
Joe DiFulgentis I used this for a faster disconnect from a dip tube placed inside a 7 gallon water tank when I need to refill the tank. No leaks and easy to use. Great customer service as well!
Y
Yegor Vekhov Robust quick connect. Recommend
Rinser Connection Fitting Push Fit 3/8 tube x 1/2 BSP 90 Angle Elbow
/
Shipping calculated at checkout.
This pitcher rinser connection fitting is Push Fit 3/8 tube x 1/2 BSP 90 degree elbow.
That elusive piece that you can’t buy at the hardware store.
If you are installing a rinser in a low profile setting this helps get it done.
Looking for the straight version of the rinser fitting?
Push Fit 3/8" Tube X 1/2" Female BSPP
1 review
/
Shipping calculated at checkout.
3/8" JG SPEEDFIT X 1/2" FEMALE BSPP-GREY
Used with pitcher rinsers and shurflo pump connections. Fits 1/2" British Standard Threads x 3/8 tube
- Leak Resistant Dual EPDM O-rings
- Chemical Resistant Polypropylene
- Certified to NSF/ANSI Standard 58
- 304 Stainless Steel Gripping Teeth
- 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
- 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
- For use with Plastic or Soft Metal Tubing
- Color : Grey
- Material : Polypropylene
- NSF/ANSI Certified : Yes
- O-Rings : EPDM (x1)
*manufacturer may vary*
Email or fill out question box below with any questions
T
Tyron Clemmons I got everything I ordered on time. Will order again.
Push Fit 3/8" Check Valve, Red Collet
/
Shipping calculated at checkout.
3/8" MUR-LOK CHECK VALVE, RED COLLET
- 0.3 cracking pressure
- Leak Resistant Dual EPDM O-rings
- Chemical Resistant Polypropylene
- Certified to NSF/ANSI Standard 58
- 304 Stainless Steel Gripping Teeth
- 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
- 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
- For use with Plastic or Soft Metal Tubing
- Color : White
- Material : Polypropylene
- NSF/ANSI Certified : Yes
- O-Rings : EPDM (x2)
*manufacturer may vary*
Email or fill out question box below with any questions
Push Fit 3/8" Check Valve - Black, Red Collet
/
Shipping calculated at checkout.
0.3 cracking pressure 3/8 tube check valve.
Use before pitcher rinsers, sinks, espresso coffee machines.
Use between pumps and accumulators.
- Leak Resistant Dual EPDM O-rings
- Chemical Resistant Polypropylene
- Certified to NSF/ANSI Standard 58
- 304 Stainless Steel Gripping Teeth
- 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
- 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
- For use with Plastic or Soft Metal Tubing
- Color : Black
- Material : Polypropylene
- NSF/ANSI Certified : Yes
- O-Rings : EPDM (x2)
*manufacturer may vary*
Email or fill out question box below with any questions
Push Fit 3/8" Tube X 3/8" Male NPTF-Black
/
Shipping calculated at checkout.
- 3/8" TUBE X 3/8" MALE NPTF-BLACK
- Leak Resistant Dual EPDM O-rings
- Chemical Resistant Polypropylene
- Certified to NSF/ANSI Standard 58
- 304 Stainless Steel Gripping Teeth
- 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
- 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
- For use with Plastic or Soft Metal Tubing
- Color : Black
- Material : Polypropylene
- NSF/ANSI Certified : Yes
- O-Rings : EPDM (x2)
*manufacturer may vary*
Email or fill out question box below with any questions
Push Fit 3/8" Tube 2-Way Divider - Black
/
Shipping calculated at checkout.
3/8" TUBE 2-WAY DIVIDER SPLITTER - BLACK
- Leak Resistant Dual EPDM O-rings
- Chemical Resistant Polypropylene
- Certified to NSF/ANSI Standard 58
- 304 Stainless Steel Gripping Teeth
- 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
- 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
- For use with Plastic or Soft Metal Tubing
- Color : Black
- Material : Polypropylene
- NSF/ANSI Certified : Yes
- O-Rings : EPDM (x2)
*manufacturer may vary*
Email or fill out question box below with any questions