Water Pump Fittings

Filter By Category
Water Pump Fittings
27 products

27 products

Quick view
Tubing Cutter
$8.95
Quick view
Push Fit 3/8" Tube Shut-Off Valve - Polypropylene
$8.50
Quick view
Push Fit 3/8" Tube X 9/16" Male UNEF - 3/8 Compression Adapter // GS3 braided line to 3/8 tubing fitting
$7.95
Quick view
Push Fit 3/8" Tube x 1/2" NPT
$5.95
Quick view
Push Fit 3/8" tube X 3/8" Flare Female Connector
$5.25
Quick view
Push Fit 3/8" Tube X 1/2" Female BSPP
$8.95
Quick view
OMNIPURE MOUNTING CLIP - 2" DIAMETER (SINGLE CLIP) - WHITE
$3.75
Quick view
Push Fit 3/8" Check Valve - Black, Red Collet
$13.75
Quick view
Push Fit 3/8" Tube X 3/8" Stem Elbow - Black
$5.95
Quick view
Push Fit 3/8" Tube X 7/16"-24 UNS
$4.95
Quick view
EZ ANGLE STOP ADAPTER - 3/8" ML
$7.95
Quick view
Push Fit 3/8" Tube 2-Way Divider - Black
$7.95
Quick view
Push Fit 3/8" Tube X 3/8" Male NPTF-Black
$5.95
Quick view
Push Fit 3/8" Check Valve, Red Collet
$13.75
Quick view
Push Fit 3/8" Tube Union Tee
$4.95
Quick view
Push Fit 3/8" TUBE X 1/4" TUBE UNION
$4.95
Quick view
Push Fit 3/8" Tube X 1/2" Male NPTF
$5.95
Quick view
Push Fit 3/8" Tube X 3/4" Female Garden Hose Thread
$8.95
Quick view
Push Fit 3/8" TUBE X 3/8" TUBE UNION ELBOW-BLACK
$4.65
Quick view
Push Fit 3/8" Tube X 1/4" Female Flare Fitting
$5.25
Quick view
Quick Connection Fittings
$24.00
Quick view
Push Fit 3/8" Tube Stem Branch Tee
$5.95
Quick view
Push Fit 3/8" TUBE Stem Run Tee
$5.98
Quick view
Push Fit 3/8" TUBE Stem Plug In Elbow
$5.98
Quick view
Push Fit 1/2" TUBE x 3/8 Tube Union Elbow
$5.95
Quick view
Rinser Connection Fitting Push Fit 3/8 tube x 1/2 BSP 90 Angle Elbow
$8.95
Quick view
Push Fit 3/8” Quick Connection Fittings
$24.00

Tubing Cutter

$8.95
/
Shipping calculated at checkout.

This tubing cutter helps ensure a nice clean cut that results in a better fit.

Works with tubing up to 1/2" inch.

Perfect addition to our install kits

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Push Fit 3/8" Tube Shut-Off Valve - Polypropylene - Caffewerks

Push Fit 3/8" Tube Shut-Off Valve - Polypropylene

$8.50
/
Shipping calculated at checkout.

Push Fit connector shut-off valve. The working pressure is 0 to 150 psi and the working temperature is 33° F to 140° F. These valves are not for use with compressed air, explosive gases, petroleum spirits and other fuels, or for heating systems. The O-ring material is EPDM.

*manufacturer may vary*

Email or fill out question box below with any questions 

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Colin Brown
Critical piece for Mobile Espresso

Pricy yet necessary

B
Brandon Wollman

Push Fit 3/8" Tube Shut-Off Valve - Polypropylene

3/8" TUBE X 9/16" MALE UNEF-BLACK 3/8 compression Adapter

Push Fit 3/8" Tube X 9/16" Male UNEF - 3/8 Compression Adapter // GS3 braided line to 3/8 tubing fitting

$7.95
/
Shipping calculated at checkout.

If you are installing your La Marzocco GS3 or Linea Mini using 3/8" beverage tubing this fitting will adapt the hose on your espresso machine to 3/8" beverage tubing. 

These fittings are designed for fluid applications where risk of chemical attack and/or leak resistance is of concern. 

  • Leak Resistant Dual EPDM O-rings
  • UV and Chemical Resistant Polypropylene
  • Certified to NSF/ANSI Standard 58
  • 304 Stainless Steel Gripping Teeth
  • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  • For use with Plastic or Soft Metal Tubing
  • Color may vary


 

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Justin

Exactly what I needed to hook up my water line to my sink on my coffee cart.

J
Justin Runyon
This is the piece you're looking for

If you're looking to hook up a pitcher rinser or sink faucet in a coffee cart, this is the piece you haven't been able to find at any hardware store, plumbing store, etc. It took me forever to realize that this was the one thing I was missing. If you're hooking up a Flojet (or similar), you'll bring the 1/4" tube to the 3/8" tube with another adapter piece, then the 3/8" tube to this so that it connects to the rinser/sink line. Don't hesitate - buy it now so you can finish your project sooner!

G
George Farago
Perfect fit for my GS3

This works perfectly with my GS3 plumbed in. Thanks Caffewerks for the quick and easy recommendations.

V
Voltage Coffee Project
Works perfectly as intended.

After searching high and low to find an adapter for the water line on a La Marzocco GS3, this was the one part we needed to connect it to a pex water line for using with the Simple Cart System. Additionally, many RO water systems use pex tubing in this size, so going back and forth between portable cart mode and in-line water is a breeze.

E
Emily Kliewer
Super thankful! So rare to find!

I had such trouble finding a John Guest Push Fit accessory to fit my waterline connected to my La Marzocco Espresso Machine. After numerous emails and many purchases from other companies, I was super thankful for Zachary and his diligence in leading me directly to what I needed. Very pleased!

12
3/8" Tube OD x 1/2" MNPTF Connector, Caffewerks

Push Fit 3/8" Tube x 1/2" NPT

$5.95
/
Shipping calculated at checkout.

Connect and disconnect tubing without tools. Meets FDA standards & NSF listed. O-ring/collet design. Body is polypropylene, O-rings are EPDM. Collet is polypropylene with stainless steel teeth. Max 150 PSI @70°F, 60 PSI at 140°F. Working Temp: 33°F to 140°F. Will withstand a full vacuum. Use fittings with rigid tubings. Tube-to-hose stems and elbows let you use soft tubing. Create rotating swivel connections by connecting special stem adapters with male pipe threads together. White in color.

 

*manufacturer may vary*

Email or fill out question box below with any questions 

Push Fit 3/8" tube X 3/8" Flare Female Connector

$5.25
/
Shipping calculated at checkout.

Push Fit Female Adapter Flare - 3/8 tube x 3/8 Flare

This is the connector you need when installing a coffee brewer with a 3/8 Male  Flare fitting.

 

Complete installation kits are also available here.

 

*manufacturer may vary*

Email or fill out question box below with any questions 
3/8" JG SPEEDFIT X 1/2" FEMALE BSPP-GREY

Push Fit 3/8" Tube X 1/2" Female BSPP

$8.95
/
Shipping calculated at checkout.
3/8" JG SPEEDFIT X 1/2" FEMALE BSPP-GREY
Used with pitcher rinsers and shurflo pump connections. Fits 1/2" British Standard Threads x 3/8 tube
  • Leak Resistant Dual EPDM O-rings
  • Chemical Resistant Polypropylene
  • Certified to NSF/ANSI Standard 58
  • 304 Stainless Steel Gripping Teeth
  • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  • For use with Plastic or Soft Metal Tubing
  • Color : Grey
  • Material : Polypropylene
  • NSF/ANSI Certified : Yes
  • O-Rings : EPDM (x1)

*manufacturer may vary*

Email or fill out question box below with any questions 

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Tyron Clemmons

I got everything I ordered on time. Will order again.

OMNIPURE MOUNTING CLIP - 2" DIAMETER (SINGLE CLIP) - WHITE

OMNIPURE MOUNTING CLIP - 2" DIAMETER (SINGLE CLIP) - WHITE

$3.75
/
Shipping calculated at checkout.

 

Omnipure Mounting Clip - 2" Diameter (single clip) - White

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    3/8" MUR-LOK CHECK VALVE-BLACK, RED COLLET

    Push Fit 3/8" Check Valve - Black, Red Collet

    $13.75
    /
    Shipping calculated at checkout.

     

    0.3 cracking pressure 3/8 tube check valve.

    Use before pitcher rinsers, sinks, espresso coffee machines.

    Use between pumps and accumulators. 

    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : Black
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer may vary*

    Email or fill out question box below with any questions 
    3/8" TUBE X 3/8" STEM ELBOW-BLACK

    Push Fit 3/8" Tube X 3/8" Stem Elbow - Black

    $5.95
    /
    Shipping calculated at checkout.

    3/8" TUBE X 3/8" STEM ELBOW-BLACK

    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : Black
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    • *manufacturer may vary*

      Email or fill out question box below with any questions 

    Push Fit 3/8" Tube X 7/16"-24 UNS

    $4.95
    /
    Shipping calculated at checkout.

    3/8" TUBE X 7/16"-24 UNS connects to faucet threads on single tap faucets.

    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : White
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer may vary*

    Email or fill out question box below with any questions 
    EZ ANGLE STOP ADAPTER - 3/8" ML

    EZ ANGLE STOP ADAPTER - 3/8" ML

    $7.95
    /
    Shipping calculated at checkout.

    This fitting connects to your existing 3/8 compression / 9/16 UNEF cold water connection adding a 3/8 tube push fitting that can then be run to your device.

     EZ Angle Stop Adapters are the simplest way to connect any water-using appliance from icemakers to espresso coffee equipment. Constructed of chemical resistant Polypropylene.

    *manufacturer may vary*

    Email or fill out question box below with any questions 
    3/8" TUBE 2-WAY DIVIDER-BLACK

    Push Fit 3/8" Tube 2-Way Divider - Black

    $7.95
    /
    Shipping calculated at checkout.
    3/8" TUBE 2-WAY DIVIDER SPLITTER - BLACK
    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : Black
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer may vary*

    Email or fill out question box below with any questions 
    3/8" TUBE X 3/8" MALE NPTF-BLACK

    Push Fit 3/8" Tube X 3/8" Male NPTF-Black

    $5.95
    /
    Shipping calculated at checkout.
    • 3/8" TUBE X 3/8" MALE NPTF-BLACK
    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : Black
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer may vary*

    Email or fill out question box below with any questions 
    3/8" MUR-LOK CHECK VALVE, RED COLLET

    Push Fit 3/8" Check Valve, Red Collet

    $13.75
    /
    Shipping calculated at checkout.

    3/8" MUR-LOK CHECK VALVE, RED COLLET

     

    • 0.3 cracking pressure
    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : White
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer may vary*

    Email or fill out question box below with any questions 

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    3/8" TUBE UNION TEE

    Push Fit 3/8" Tube Union Tee

    $4.95
    /
    Shipping calculated at checkout.

    A 3/8" Tube three-way union tee. 

    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : white
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer may vary*

    Email or fill out question box below with any questions 

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    J
    John Kirk
    Boom

    Snip. Snip. Click. Click. Click. and my second machine was up and running. So easy. So efficient. Cheers-

    3/8" TUBE X 1/4" TUBE UNION

    Push Fit 3/8" TUBE X 1/4" TUBE UNION

    $4.95
    /
    Shipping calculated at checkout.

    Adapt 1/4 tube to 3/8 tube

    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : White
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer may vary*

    Email or fill out question box below with any questions 
    Push Fit 3/8" Tube X 1/2" Male NPTF

    Push Fit 3/8" Tube X 1/2" Male NPTF

    $5.95
    /
    Shipping calculated at checkout.

    3/8" TUBE X 1/2" MALE NPTF

    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : white
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer and color may vary*

    Email or fill out question box below with any questions 
    3/8" TUBE X 3/4" FEMALE GARDEN HOSE THREAD

    Push Fit 3/8" Tube X 3/4" Female Garden Hose Thread

    $8.95
    /
    Shipping calculated at checkout.

    Connect from 3/4 Garden hose thread connections to 3/8 beverage tubing.

    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : Black
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer may vary*

    Email or fill out question box below with any questions 
    Push Fit 3/8" TUBE X 3/8" TUBE UNION ELBOW-BLACK

    Push Fit 3/8" TUBE X 3/8" TUBE UNION ELBOW-BLACK

    $4.65
    /
    Shipping calculated at checkout.

    3/8" TUBE X 3/8" TUBE UNION ELBOW-BLACK

     

    Features:

    • Leak Resistant Dual EPDM O-rings
    • UV and Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing

    *manufacturer may vary*

    Email or fill out question box below with any questions 

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    Push Fit 3/8" Tube X 1/4" Female Flare Fitting

    Push Fit 3/8" Tube X 1/4" Female Flare Fitting

    $5.25
    /
    Shipping calculated at checkout.

    Push Fit Female Adapter Flare - 3/8" tube x 1/4" Flare

    This is the connector you need when installing a coffee brewer with a 1/4" Male  Flare fitting.

     

    Complete installation kits are also available here.

    *manufacturer may vary*

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Quick Connection Fittings

    $24
    /
    Shipping calculated at checkout.

     

    These connections fittings have been updated to a Push Fit style connection (Linked below) for an even easier installation into our Equipment Install kits.

    https://caffewerks.com/products/push-fit-3-8-quick-connection-fittings?_pos=1&_psq=quick&_ss=e&_v=1.0

    These quick connection fittings make removal of equipment and devices easy.

    Four inches of 3/8 OD tubing is provided on each connector. Each kit includes one female and one male quick connect.

    Easy installation into our push fittings.  Additional fittings maybe required to connect inline with components. 

     

    Customer Reviews

    Based on 8 reviews
    100%
    (8)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    T
    Travis Swanson
    Great Service

    Always quick to get things out and a fantastic resource.

    B
    Benjamin Cox

    Quick Connection Fittings

    A
    Antonio
    Great Service and Turnaround

    I was very pleased with how Caffewerks fixed my Accumalater and Pump along with adding brand new Quick Connection Fittings, which has my Coffee Cart running smoothly!

    H
    Heather Lyles

    Quick Connection Fittings

    J
    Joe DiFulgentis
    Works great

    I used this for a faster disconnect from a dip tube placed inside a 7 gallon water tank when I need to refill the tank. No leaks and easy to use. Great customer service as well!

    12
    Push Fit 3/8" Tube Stem Branch Tee

    Push Fit 3/8" Tube Stem Branch Tee

    $5.95
    /
    Shipping calculated at checkout.

    A 3/8" Tube Stem Run Tee. 

    • Leak Resistant EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : white
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM

    Email or fill out question box below with any questions 

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    Push Fit 3/8" TUBE Stem Run Tee

    Push Fit 3/8" TUBE Stem Run Tee

    $5.98
    /
    Shipping calculated at checkout.
    3/8 tube x 3/8 tube x 3/8 stem push fitting for use with LDPE and Polyurethane 3/8 tubing

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    Push Fit 3/8" TUBE Stem Plug In Elbow

    Push Fit 3/8" TUBE Stem Plug In Elbow

    $5.98
    /
    Shipping calculated at checkout.
    3/8 STEM x 3/8 tube Elbow push fitting for use with LDPE and Polyurethane 3/8 tubing

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    Push Fit 1/2" TUBE x 3/8 Tube Union Elbow

    Push Fit 1/2" TUBE x 3/8 Tube Union Elbow

    $5.95
    /
    Shipping calculated at checkout.
    1/2'' Tube x 3/8'' Tube Union Elbow-Black
    Caffewerks Polypropylene Fittings are designed for fluid applications where risk of chemical attack and/or leak resistance is of concern.
    Features:
      • Leak Resistant Dual EPDM O-rings
      • UV and Chemical Resistant Polypropylene
      • Certified to NSF/ANSI Standard 58
      • 304 Stainless Steel Gripping Teeth
      • 150 p.s.i. @ 70°F (10 Bar @ 20°C)
      • 60 p.s.i. @ 140°F (4 Bar @ 60°C)
      • For use with Plastic or Soft Metal Tubing
    Origin Country: United States

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Rinser Connection Fitting Push Fit 3/8 tube x 1/2 BSP 90 Angle Elbow

    $8.95
    /
    Shipping calculated at checkout.

    This pitcher rinser connection fitting is Push Fit 3/8 tube x 1/2 BSP 90 degree elbow.

    That elusive piece that you can’t buy at the hardware store. 

    If you are installing a rinser in a low profile setting this helps get it done.

     

    Looking for the straight version of the rinser fitting?

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    F
    Frank Hansen
    Fast delivery & quality products

    Appreciate the great customer support! Only knock would be the cost of shipping.

    Push Fit 3/8” Quick Connection Fittings

    $24
    /
    Shipping calculated at checkout.

    These quick connection fittings make removal of equipment and devices easy.

    These Push Fit 3/8” x Quick Connect are made of rugged FDA approved Acetal Plastic. Each connector has a built in check valve so no water is lost during disconnected transport. Each kit includes one female and one male quick connect.

    Available as individual Male and Female parts as well. 

    Easy installation just like all of our push fittings.

     

    Customer Reviews

    Based on 2 reviews
    100%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    A
    Armando
    Product Line

    The Connect Cube // Hydro, water line tubing, water tank pick up tube, quick connect and disconnect fittings are all in all exceptional products. The craftsmanship of the parts is easy to work with and its functionality is one of a kind.

    T
    Tio Fallen

    Push Fit 3/8” Quick Connection Fittings