Filter
- 150mm
- 2.75" drain
- 3-EDP
- 3/8
- 3/8 check valve
- 30 psi regulator
- 300mm
- 600mm
- 600mm rinser
- accumulator
- asse
- asse approved
- bar and cafe rinser
- bar and caffe rinser
- beer glass
- blender
- blender rinser
- bottled water pump
- cafe rinser
- caffewerks
- caffewerks spinjet
- camper water pump
- coffee cart
- coffeehouse
- counter rinser
- cup washer
- cw-spinset
- drain
- drain hose
- drain tube
- elbow
- elbow fitting
- Elkay Rinser
- espresso cart
- espressoparts
- faucet
- FFS19011164
- fitting
- fittings
- food truck
- Franke Rinser
- glass rinser
- glass washer
- healthdepartmentapproved
- inline filter
- install
- install kit
- jetter
- john guest
- jug rinser
- juice
- juice bar
- krome
- low pro drain
- low profile
- mech pin
- milkshake
- mini spinjet
- mini spinjet rinser
- mobile coffee
- mobile water
- nsf
- nsf approved
- overland water pump
- pitcher
- pitcher rinser
- pitcher rinser parts
- rh-spinset
- rh3pe-spvsk
- rhino
- rhino coffee gear
- rhino spinjet
- rhino spinjet nozzle
- rhino spinset
- rhinocoffeegear
- RHMECHPIN
- RHspinset
- rhspinset2
- RHSPVSK-01
- rinser
- rinser cleaner
- rinser gasket
- rinser o ring
- rinser parts
- Rinser repair
- rinser riser
- rinser screw
- rinser spring
- rinser upgrade
- rinser valve
- rinser valve repair
- riser
- rv water pump
- screw
- screw rinser screw
- shallow drain
- shot glass
- shower drain
- sink drain
- smoothie
- spinjet
- spinjet hot
- spinjet RH3
- spinjet rinser
- spinjet rinser mini
- spinjetter
- spo-default
- spo-disabled
- Starb3-EDP
- Starbucks rinser
- taphouse
- temporary water system
- tubing
- van build
- van water pump
- vented screw
- vessel rinser
- water
- water faucet
- water filter
- water pump
- water pump system
- wobble washer
- 150mm
- 2.75" drain
- 3-EDP
- 3/8
- 3/8 check valve
- 30 psi regulator
- 300mm
- 600mm
- 600mm rinser
- accumulator
- asse
- asse approved
- bar and cafe rinser
- bar and caffe rinser
- beer glass
- blender
- blender rinser
- bottled water pump
- cafe rinser
- caffewerks
- caffewerks spinjet
- camper water pump
- coffee cart
- coffeehouse
- counter rinser
- cup washer
- cw-spinset
- drain
- drain hose
- drain tube
- elbow
- elbow fitting
- Elkay Rinser
- espresso cart
- espressoparts
- faucet
- FFS19011164
- fitting
- fittings
- food truck
- Franke Rinser
- glass rinser
- glass washer
- healthdepartmentapproved
- inline filter
- install
- install kit
- jetter
- john guest
- jug rinser
- juice
- juice bar
- krome
- low pro drain
- low profile
- mech pin
- milkshake
- mini spinjet
- mini spinjet rinser
- mobile coffee
- mobile water
- nsf
- nsf approved
- overland water pump
- pitcher
- pitcher rinser
- pitcher rinser parts
- rh-spinset
- rh3pe-spvsk
- rhino
- rhino coffee gear
- rhino spinjet
- rhino spinjet nozzle
- rhino spinset
- rhinocoffeegear
- RHMECHPIN
- RHspinset
- rhspinset2
- RHSPVSK-01
- rinser
- rinser cleaner
- rinser gasket
- rinser o ring
- rinser parts
- Rinser repair
- rinser riser
- rinser screw
- rinser spring
- rinser upgrade
- rinser valve
- rinser valve repair
- riser
- rv water pump
- screw
- screw rinser screw
- shallow drain
- shot glass
- shower drain
- sink drain
- smoothie
- spinjet
- spinjet hot
- spinjet RH3
- spinjet rinser
- spinjet rinser mini
- spinjetter
- spo-default
- spo-disabled
- Starb3-EDP
- Starbucks rinser
- taphouse
- temporary water system
- tubing
- van build
- van water pump
- vented screw
- vessel rinser
- water
- water faucet
- water filter
- water pump
- water pump system
- wobble washer
4 products
4 products
Rhino Spinjet HOT Spray Assembly & Actuator Star // 3-EDP
No reviews
/
Shipping calculated at checkout.
Rhino Coffee Gear has reimagined the tried and tested Spinjet valve system to meet the changing needs of the industry. With an all-new extended stainless steel body, coupled with CNC-milled Delrin, and robust seal components, the RH3PE valve provides customers with the ability to use the valve in HOT water applications (Up to 55 degrees Celsius / 131 Degrees Fahrenheit).
Cleaning and maintaining your beverage pitchers properly is a multi-step process. Regular rinsing of these implements throughout the day is key to removing unwanted solids that can cause cross-contamination in your finished product, and lessen the life of the tools you used to produce them. The existing technology in Rhino’s patented Spinjet technology utilises water pressure to channel flow into the cleaning jets, creating a fast rotating motion. This rotating movement creates a superior cleaning action that rinses matter away from the surface from multiple angles.
How do you improve a fantastic cleaning action when chemicals are not practical? We add temperature. Warm water assists in making a large number of contaminants more soluble which in turn, makes them easier to remove from a surface.
Suitable for the cleaning of beverage implements used in making fruit juices, non-dairy-based smoothies, and alcoholic, and non-alcoholic cocktails.
Product Specifications:
- Dimensions (approximate): 140 mm (Length total) - 60 mm (Length above sink) - 85mm (Length below sink).
- Materials: Stainless Steel body, Delrin Spinjet.
- Inlet thread size : ½: BSP Male thread
Certifications:
- The RH3PE-SPINSET valve is NSF certified to standard ASME 1812.19.13 / CSA B45.4 2017, when installed in conjunction with a sink that meets regulatory standards.
Installation Information: - Depth Requirements: The Rhino rinsers are 40mm deep, however, this is without fittings. We recommend at least 150mm of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.
- It is recommended that the RH3PE-SPINSET is installed in conjunction with a 350 kpa / 50 psi PLV.
- It is also recommended that the RH3PE-SPINSET is installed in conjunction with a Tempering valve set at no greater than 55 Degrees Celsius / 131 Degrees Fahrenheit.
Install and FAQ information, Click Here!
The 2023 MICE Product and Innovation Award Winner for the "Ancillary Electrical Equipment Award"
Rhino Spinjet Rinser HOT Valve Service Gasket Kit // 3 - EDPM
1 review
/
Shipping calculated at checkout.
Rhino Spinjet Valve Service Gasket Kit 3 - EDPM has been produced to allow current users of the Rhino Spinjet valve platform to upgrade, to our hot water (55 Deg C) suitable variant, utilising hard-wearing, and durable EPDM material. This Gasket kit is suitable for use in routine maintenance and gasket replacement on the Rhino Coffee Gear RHSPINSET, and RH3PE Spinjet Rinser and Valve Sets.
Inclusions:
- 1 x Spring
- 1x Piston Gasket
- 3 x Mechanism O-rings”
F
Frank Braun These are better then the cold ones.
Spinjet Pitcher Rinser Valve Wobbly Washer 3 PK
No reviews
/
Shipping calculated at checkout.
SPINJET Pitcher Rinser / Glass Rinser Service Parts for routine maintenance / replacement on the Rhino Coffee Gear Spinjet Rinser & Valve Set. These 304 stainless steel wobbly washers help lock the Spinjet to the valve.
Rhino Pitcher Rinser Riser Suits 300mm Sink
No reviews
/
Shipping calculated at checkout.
The Rhino Pitcher Rinser Riser RHRISER300-BK in Black suits the Rhino Coffee Gear 300mm Pitcher Rinser. These risers have been designed to allow a simple installation without the need for a professional shop fitter to cut specific dimensions into the bench. Instead, the riser lifts the sink above the bench, enabling a smaller hole to be cut into the benchtop to supply water and drainage.
Features:
- Allows for a smaller supply line access hole to be cut into the bench.
- Removes the need for a large, exact cut-out to fit specific rinser dimensions.
- Shallow profile design reduces visual clutter on the benchtop and doesn't disrupt workflow.
- Allows for an easy upgrade from the RHPR150-S to the RHPR300 without any more cutting into your bench.
Specifications:
- Material: Powder-coated stainless steel
- Colour: Black
- Dimensions: 354mm (13.94in) L x 232mm (9.13in) W x 45mm (1.77in) H
Upgrade Your Existing Rinser with the RHRISER-300-BK:
Are you looking to upgrade your existing RHPR150-S or similar low footprint rinser but don’t want the headache of hiring an installer to cut into your benchtops again? Rhino’s new RHRISER300-BK allows you to make a quick and easy upgrade, enabling you to utilise our larger Rhino RHPR300-S Pitcher Rinser. What advantages can I expect from utilising The Rhino Pitcher Rinser 300mm?
- Rhino’s award-winning Spinjet Spray Valve which reduces water usage by up to 50% and cleans 2 x faster than other valves in the market. The Spinjet Valve sprays and spins at the same time creating a superior mechanical cleaning action compared to regular rinsing valves.
- A honeycomb grate design which minimises the surface area of the drain tray, reducing the static build-up of liquids and making cleaning easy.
- The Actuator Star diameter and design allows both small and large volume vessels to be cleaned with ease.
- A low profile body which is optimally sloped and angled to ensure effective removal of liquids, reducing common odours caused by static waste.
- The RHPR300-S features a spacious drainage grate, that is able to store roughly 4 milk jugs at once.
- A large drain outlet and a wide grate-free opening near the drain which creates a convenient location to quickly discard larger volumes of liquid.