Water Pump Fittings

This tubing cutter helps ensure a nice clean cut that results in a better fit.

Works with tubing up to 1/2" inch.

Perfect addition to our install kits

The Caffewerks 3/8 Push Fitting Release Tool, the ultimate companion for your Caffewerks Water Pump Systems. 

 Specifically designed to release, and insert beverage tubing to 3/8-inch push fittings with ease, this tool eliminates the frustration of tight connections and enhances efficiency in your daily tasks. 5” long handle is easy on your hands compared with other similar tools on the market. 

Key Features:

• Precision Design: Tailored for 3/8-inch push fittings
• Durable Build: Made from food grade HDPE to withstand frequent use and the demands of professional environments.
• Ergonomic Comfort: Lightweight and easy to use, with long handle for extra leverage and ease of use. 
• Time-Saving Efficiency: Simplifies the process of attaching and detaching push fittings from your 3/8 beverage tubing, helping you focus on what matters most.

Made in house at Caffewerks in Olympia Washington 

Upgrade your toolkit today with the Caffewerks 3/8 Push Fitting Release Tool and experience hassle-free maintenance!

Push Fit connector shut-off valve. The working pressure is 0 to 150 psi and the working temperature is 33° F to 140° F. These valves are not for use with compressed air, explosive gases, petroleum spirits and other fuels, or for heating systems. The O-ring material is EPDM.

*manufacturer may vary*

Email or fill out question box below with any questions 

This fitting will allow the connection of most standard espresso machines using 3/8 BSP braided steel hose to be connected to 3/8 beverage tubing.

3/8" Tube x 3/8" BSP  Connector Acetal

*manufacturer may vary*

Email or fill out question box below with any questions 

If you are installing your La Marzocco GS3 or Linea Mini using 3/8" beverage tubing this fitting will adapt the hose on your espresso machine to 3/8" beverage tubing. 

These fittings are designed for fluid applications where risk of chemical attack and/or leak resistance is of concern. 

• Leak Resistant Dual EPDM O-rings
  
• UV and Chemical Resistant Polypropylene
  
• Certified to NSF/ANSI Standard 58
  
• 304 Stainless Steel Gripping Teeth
• 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  
• 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  
• For use with Plastic or Soft Metal Tubing

Connect and disconnect tubing without tools. Meets FDA standards & NSF listed. O-ring/collet design. Body is polypropylene, O-rings are EPDM. Collet is polypropylene with stainless steel teeth. Max 150 PSI @70°F, 60 PSI at 140°F. Working Temp: 33°F to 140°F. Will withstand a full vacuum. Use fittings with rigid tubings. Tube-to-hose stems and elbows let you use soft tubing. Create rotating swivel connections by connecting special stem adapters with male pipe threads together. White in color.

*manufacturer may vary*

Email or fill out question box below with any questions 

Push Fit Female Adapter Flare - 3/8 tube x 3/8 Flare

This is the connector you need when installing a coffee brewer with a 3/8 Male  Flare fitting.

Complete installation kits are also available here.

*manufacturer may vary*

Email or fill out question box below with any questions 

• Leak Resistant Dual EPDM O-rings
  
• Chemical Resistant Polypropylene
  
• Certified to NSF/ANSI Standard 58
  
• 304 Stainless Steel Gripping Teeth
• 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  
• 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  
• For use with Plastic or Soft Metal Tubing

• Color : Grey
• Material : Polypropylene
• NSF/ANSI Certified : Yes
• O-Rings : EPDM (x1)

*manufacturer may vary*

Email or fill out question box below with any questions 

Omnipure Mounting Clip - 2" Diameter (single clip) - White

If you are trying to install your espresso machine using 3/8" beverage tubing to a 3/8 compression angle valve this is the fitting to use.

These fittings are designed for fluid applications where risk of chemical attack and/or leak resistance is of concern. 

• Leak Resistant Dual EPDM O-rings
  
• UV and Chemical Resistant Polypropylene
  
• Certified to NSF/ANSI Standard 58
  
• 304 Stainless Steel Gripping Teeth
• 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  
• 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  
• For use with Plastic or Soft Metal Tubing

0.3 cracking pressure 3/8 tube check valve.

Use before pitcher rinsers, sinks, espresso coffee machines.

Use between pumps and accumulators. 

• Leak Resistant Dual EPDM O-rings
  
• Chemical Resistant Polypropylene
  
• Certified to NSF/ANSI Standard 58
  
• 304 Stainless Steel Gripping Teeth
• 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  
• 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  
• For use with Plastic or Soft Metal Tubing

• Color : Black
• Material : Polypropylene
• NSF/ANSI Certified : Yes
• O-Rings : EPDM (x2)

*manufacturer may vary*

Email or fill out question box below with any questions 

3/8" TUBE X 3/8" STEM ELBOW-BLACK

• Leak Resistant Dual EPDM O-rings
  
• Chemical Resistant Polypropylene
  
• Certified to NSF/ANSI Standard 58
  
• 304 Stainless Steel Gripping Teeth
• 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  
• 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  
• For use with Plastic or Soft Metal Tubing

• Color : Black
• Material : Polypropylene
• NSF/ANSI Certified : Yes
• O-Rings : EPDM (x2)

• *manufacturer may vary*

  Email or fill out question box below with any questions 

3/8" TUBE X 7/16"-24 UNS connects to faucet threads on single tap faucets.

• Leak Resistant Dual EPDM O-rings
  
• Chemical Resistant Polypropylene
  
• Certified to NSF/ANSI Standard 58
  
• 304 Stainless Steel Gripping Teeth
• 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  
• 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  
• For use with Plastic or Soft Metal Tubing

• Color : White
• Material : Polypropylene
• NSF/ANSI Certified : Yes
• O-Rings : EPDM (x2)

*manufacturer may vary*

Email or fill out question box below with any questions 

This fitting connects to your existing 3/8 compression / 9/16 UNEF cold water connection adding a 3/8 tube push fitting that can then be run to your device.

 EZ Angle Stop Adapters are the simplest way to connect any water-using appliance from icemakers to espresso coffee equipment. Constructed of chemical resistant Polypropylene.

*manufacturer may vary*

Email or fill out question box below with any questions 

• Leak Resistant Dual EPDM O-rings
  
• Chemical Resistant Polypropylene
  
• Certified to NSF/ANSI Standard 58
  
• 304 Stainless Steel Gripping Teeth
• 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  
• 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  
• For use with Plastic or Soft Metal Tubing

• Color : Black
• Material : Polypropylene
• NSF/ANSI Certified : Yes
• O-Rings : EPDM (x2)

*manufacturer may vary*

Email or fill out question box below with any questions 

• 3/8" TUBE X 3/8" MALE NPTF-BLACK
• Leak Resistant Dual EPDM O-rings
  
• Chemical Resistant Polypropylene
  
• Certified to NSF/ANSI Standard 58
  
• 304 Stainless Steel Gripping Teeth
• 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  
• 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  
• For use with Plastic or Soft Metal Tubing

• Color : Black
• Material : Polypropylene
• NSF/ANSI Certified : Yes
• O-Rings : EPDM (x2)

*manufacturer may vary*

Email or fill out question box below with any questions 

3/8" MUR-LOK CHECK VALVE, RED COLLET

• 0.3 cracking pressure
• Leak Resistant Dual EPDM O-rings
  
• Chemical Resistant Polypropylene
  
• Certified to NSF/ANSI Standard 58
  
• 304 Stainless Steel Gripping Teeth
• 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  
• 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  
• For use with Plastic or Soft Metal Tubing

• Color : White
• Material : Polypropylene
• NSF/ANSI Certified : Yes
• O-Rings : EPDM (x2)

*manufacturer may vary*

Email or fill out question box below with any questions 

A 3/8" Tube three-way union tee. 

• Leak Resistant Dual EPDM O-rings
  
• Chemical Resistant Polypropylene
  
• Certified to NSF/ANSI Standard 58
  
• 304 Stainless Steel Gripping Teeth
• 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  
• 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  
• For use with Plastic or Soft Metal Tubing

• Color : white
• Material : Polypropylene
• NSF/ANSI Certified : Yes
• O-Rings : EPDM (x2)

*manufacturer may vary*

Email or fill out question box below with any questions 

Adapt 1/4 tube to 3/8 tube

• Leak Resistant Dual EPDM O-rings
  
• Chemical Resistant Polypropylene
  
• Certified to NSF/ANSI Standard 58
  
• 304 Stainless Steel Gripping Teeth
• 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  
• 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  
• For use with Plastic or Soft Metal Tubing

• Color : White
• Material : Polypropylene
• NSF/ANSI Certified : Yes
• O-Rings : EPDM (x2)

*manufacturer may vary*

Email or fill out question box below with any questions 

3/8" TUBE X 1/2" MALE NPTF

• Leak Resistant Dual EPDM O-rings
  
• Chemical Resistant Polypropylene
  
• Certified to NSF/ANSI Standard 58
  
• 304 Stainless Steel Gripping Teeth
• 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  
• 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  
• For use with Plastic or Soft Metal Tubing

• Color : white
• Material : Polypropylene
• NSF/ANSI Certified : Yes
• O-Rings : EPDM (x2)

*manufacturer and color may vary*

Email or fill out question box below with any questions 

Connect from 3/4 Garden hose thread connections to 3/8 beverage tubing.

• Leak Resistant Dual EPDM O-rings
  
• Chemical Resistant Polypropylene
  
• Certified to NSF/ANSI Standard 58
  
• 304 Stainless Steel Gripping Teeth
• 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  
• 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  
• For use with Plastic or Soft Metal Tubing

• Color : Black
• Material : Polypropylene
• NSF/ANSI Certified : Yes
• O-Rings : EPDM (x2)

*manufacturer may vary*

Email or fill out question box below with any questions 

Perfect for converting Flojet BW5000 systems over to 3/8 beverage tube.

*manufacturer may vary*

Email or fill out question box below with any questions 

3/8" TUBE X 3/8" TUBE UNION ELBOW-BLACK

Features:

• Leak Resistant Dual EPDM O-rings
  
• UV and Chemical Resistant Polypropylene
  
• Certified to NSF/ANSI Standard 58
  
• 304 Stainless Steel Gripping Teeth
• 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  
• 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  
• For use with Plastic or Soft Metal Tubing

*manufacturer may vary*

Email or fill out question box below with any questions 

Push Fit Female Adapter Flare - 3/8" tube x 1/4" Flare

This is the connector you need when installing a coffee brewer with a 1/4" Male  Flare fitting.

Complete installation kits are also available here.

*manufacturer may vary*

These 3/8 Push Fit plugs come in handy when you want to block a port on another Push Fit fitting.

*manufacturer may vary*

Email or fill out question box below with any questions 

How you get water to your pump is important to the functionality and longevity of your pump system. We designed these pick up tubes as a solution for anyone looking to move water from a tank with ease.

These pick up tubes shown fit a standard 5 gallon water container/ jug but we can create any length you might need.

*The 5 Gallon Pick Up Tube comes with a blue cap on the top that fits most standard 5 gallon water bottles. Please note, the cap does not seal or create a water tight fit, it is designed to sit gently on top of the water jug to keep out debris. This cap does not fit threaded or glass bottles

A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A *NEW* slim fit stainer on the end allows for an easy installation! 

The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container,  his is designed in an effort to keep settled debris from clogging your inlet screen

Total length of Pick Up Tube is approximately 20" - depth of pick up tube into container can be controlled by adjusting placement of lid.

Use a Reliance Brand Fresh Water Tank? Check out our Pick Up Tube for Reliance Tanks

Check out this quick video on the use of the pick up tube

If you need a custom length please note required size in notes section during check out 

These connections fittings have been updated to a Push Fit style connection (Linked below) for an even easier installation into our Equipment Install kits.

https://caffewerks.com/products/push-fit-3-8-quick-connection-fittings?_pos=1&_psq=quick&_ss=e&_v=1.0

These quick connection fittings make removal of equipment and devices easy.

Four inches of 3/8 OD tubing is provided on each connector. Each kit includes one female and one male quick connect.

Easy installation into our push fittings.  Additional fittings maybe required to connect inline with components.