If you are installing your La Marzocco GS3 or Linea Mini using 3/8" beverage tubing this fitting will adapt the hose on your espresso machine to 3/8" beverage tubing.
These fittings are designed for fluid applications where risk of chemical attack and/or leak resistance is of concern.
Exactly what I needed to hook up my water line to my sink on my coffee cart.
J
Justin Runyon
This is the piece you're looking for
If you're looking to hook up a pitcher rinser or sink faucet in a coffee cart, this is the piece you haven't been able to find at any hardware store, plumbing store, etc. It took me forever to realize that this was the one thing I was missing. If you're hooking up a Flojet (or similar), you'll bring the 1/4" tube to the 3/8" tube with another adapter piece, then the 3/8" tube to this so that it connects to the rinser/sink line. Don't hesitate - buy it now so you can finish your project sooner!
G
George Farago
Perfect fit for my GS3
This works perfectly with my GS3 plumbed in. Thanks Caffewerks for the quick and easy recommendations.
V
Voltage Coffee Project
Works perfectly as intended.
After searching high and low to find an adapter for the water line on a La Marzocco GS3, this was the one part we needed to connect it to a pex water line for using with the Simple Cart System. Additionally, many RO water systems use pex tubing in this size, so going back and forth between portable cart mode and in-line water is a breeze.
E
Emily Kliewer
Super thankful! So rare to find!
I had such trouble finding a John Guest Push Fit accessory to fit my waterline connected to my La Marzocco Espresso Machine. After numerous emails and many purchases from other companies, I was super thankful for Zachary and his diligence in leading me directly to what I needed. Very pleased!
Caffewerks was the only place I could find the Flojet 1/4 inch to JG 3/8 tube fitting. Arrived fast and did what I needed it to do. I was plumbing a small RV water system the used John Guest fittings after the pump.
This fitting connects to your existing 3/8 compression / 9/16 UNEF cold water connection adding a 3/8 tube push fitting that can then be run to your device.
EZ Angle Stop Adapters are the simplest way to connect any water-using appliance from icemakers to espresso coffee equipment. Constructed of chemical resistant Polypropylene.
*manufacturer may vary*
Email or fill out question box below with any questions
How you get water to your pump is important to the functionality and longevity of your pump system. We designed these pick up tubes as a solution for anyone looking to move water from a tank with ease.
These pick up tubes shown fit a standard 5 gallon water container/ jug but we can create any length you might need.
*The 5 Gallon Pick Up Tube comes with a blue cap on the top that fits most standard 5 gallon water bottles. Please note, the cap does not seal or create a water tight fit, it is designed to sit gently on top of the water jug to keep out debris. This cap does not fit threaded or glass bottles
A check valve is built into the end of the tube to maintain water pressure as you change tanks which keeps you from having to re-prime the system every time you change a tank. A *NEW* slim fit stainer on the end allows for an easy installation!
The Caffewerks Pick Up Tube is designed to leave a few inches of space from the bottom on the container, his is designed in an effort to keep settled debris from clogging your inlet screen
Total length of Pick Up Tube is approximately 20" - depth of pick up tube into container can be controlled by adjusting placement of lid.
We run a small café service for a church called Overflow Café. You guys were super helpful with the supplies as I needed it last minute as well, thank you.
- Dan
B
Brian Galvan
Water System Pick Up Tube for 5 Gallon Water Bottle
Water System Pick Up Tube for 5 Gallon Water Bottle is another quality component from Caffewerks! I trust the craftsmanship of all their components for our mobile coffee operations. Customer support is always phenomenal for any of their products when you have questions.
H
Holly Schmidt
Water System Pick Up Tube for 5 Gallon Water Bottle
I was very pleased with how Caffewerks fixed my Accumalater and Pump along with adding brand new Quick Connection Fittings, which has my Coffee Cart running smoothly!
H
Heather Lyles
Quick Connection Fittings
J
Joe DiFulgentis
Works great
I used this for a faster disconnect from a dip tube placed inside a 7 gallon water tank when I need to refill the tank. No leaks and easy to use. Great customer service as well!
A simple solution for inline filtration running to your espresso machine or water tap.
3/8"Push Fit fittings compatible with all Caffewerks Water Pump Systems.
These quick connection fittings make removal of equipment and devices easy.
These Push Fit 3/8” x Quick Connect are made of rugged FDA approved Acetal Plastic. Each connector has a built in check valve so no water is lost during disconnected transport. Each kit includes one female and one male quick connect.
Available as individual Male and Female parts as well.
Easy installation just like all of our push fittings.
