Water Pump Fittings

Filter By Category
Water Pump Fittings
28 products

28 products

Quick view
Caffewerks // BaristaFlo // 3/8 Push Fit Lock and Release Tool
$6.95
Quick view
Push Fit 3/8" Tube Shut-Off Valve - Polypropylene
$8.50
Quick view
Push Fit 3/8" Tube X 9/16" Male UNEF - Black 3/8 Compression Adapter // GS3 braided line to 3/8 tubing fitting
$7.95
Quick view
Push Fit 3/8" Tube x 1/2" NPT
$5.75
Quick view
Push Fit 3/8" tube X 3/8" Flare Female Connector
$5.25
Quick view
Push Fit 3/8" Tube X 1/4" Flojet Fitting
$6.99
Quick view
Push Fit 3/8" Tube X 1/2" Female BSPP
$8.95
Quick view
OMNIPURE MOUNTING CLIP - 2" DIAMETER (SINGLE CLIP) - WHITE
$3.75
Quick view
Push Fit 3/8" Check Valve - Black, Red Collet
$13.75
Quick view
Push Fit 3/8" Tube X 3/8" Stem Elbow - Black
$5.95
Quick view
Push Fit 3/8" Tube X 7/16"-24 UNS
$4.95
Quick view
EZ ANGLE STOP ADAPTER - 3/8" ML
$7.95
Quick view
Push Fit 3/8" Tube 2-Way Divider - Black
$7.95
Quick view
Push Fit 3/8" Tube X 3/8" Male NPTF-Black
$5.95
Quick view
Push Fit 3/8" Check Valve, Red Collet
$13.75
Quick view
Push Fit 3/8" Tube Union Tee
$4.95
Quick view
Push Fit 3/8" TUBE X 1/4" TUBE UNION
$4.95
Quick view
Push Fit 3/8" Tube X 1/2" Male NPTF
$5.95
Quick view
Push Fit 3/8" Tube X 3/4" Female Garden Hose Thread
$8.95
Quick view
Push Fit 3/8" Tube x 1/4" Stem Elbow
$6.95
Quick view
Push Fit 3/8" TUBE X 3/8" TUBE UNION ELBOW-BLACK
$4.65
Quick view
Push Fit 3/8" Tube X 1/4" Female Flare Fitting
$5.25
Quick view
Push Fit 3/8" Tube Stem Branch Tee
$5.95
Quick view
Push Fit 3/8" 30 PSI Pressure Regulator
$15.95
Quick view
Push Fit 3/8" TUBE Stem Run Tee
$5.98
Quick view
Push Fit 3/8" TUBE Stem Plug In Elbow
$5.98
Quick view
Push Fit 1/2" TUBE x 3/8 Tube Union Elbow
$5.95
Quick view
Push Fit 3/8 Tube x 1/4 Male BSPT // LUCCA Braided line fitting
$5.95

Caffewerks // BaristaFlo // 3/8 Push Fit Lock and Release Tool

$6.95
/
Shipping calculated at checkout.

The Caffewerks 3/8 Push Fitting Release Tool, the ultimate companion for your Caffewerks Water Pump Systems. 

 Specifically designed to release, and insert beverage tubing to 3/8-inch push fittings with ease, this tool eliminates the frustration of tight connections and enhances efficiency in your daily tasks. 5” long handle is easy on your hands compared with other similar tools on the market. 

Key Features:

  • Precision Design: Tailored for 3/8-inch push fittings
  • Durable Build: Made from food grade HDPE to withstand frequent use and the demands of professional environments.
  • Ergonomic Comfort: Lightweight and easy to use, with long handle for extra leverage and ease of use. 
  • Time-Saving Efficiency: Simplifies the process of attaching and detaching push fittings from your 3/8 beverage tubing, helping you focus on what matters most.

Made in house at Caffewerks in Olympia Washington 

Upgrade your toolkit today with the Caffewerks 3/8 Push Fitting Release Tool and experience hassle-free maintenance!

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Push Fit 3/8" Tube Shut-Off Valve - Polypropylene - Caffewerks

Push Fit 3/8" Tube Shut-Off Valve - Polypropylene

$8.50
/
Shipping calculated at checkout.

Push Fit connector shut-off valve. The working pressure is 0 to 150 psi and the working temperature is 33° F to 140° F. These valves are not for use with compressed air, explosive gases, petroleum spirits and other fuels, or for heating systems. The O-ring material is EPDM.

*manufacturer may vary*

Email or fill out question box below with any questions 

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Colin Brown
Critical piece for Mobile Espresso

Pricy yet necessary

B
Brandon Wollman

Push Fit 3/8" Tube Shut-Off Valve - Polypropylene

3/8" TUBE X 9/16" MALE UNEF-BLACK 3/8 compression Adapter

Push Fit 3/8" Tube X 9/16" Male UNEF - Black 3/8 Compression Adapter // GS3 braided line to 3/8 tubing fitting

$7.95
/
Shipping calculated at checkout.

If you are installing your La Marzocco GS3 or Linea Mini using 3/8" beverage tubing this fitting will adapt the hose on your espresso machine to 3/8" beverage tubing. 

These fittings are designed for fluid applications where risk of chemical attack and/or leak resistance is of concern. 

  • Leak Resistant Dual EPDM O-rings
  • UV and Chemical Resistant Polypropylene
  • Certified to NSF/ANSI Standard 58
  • 304 Stainless Steel Gripping Teeth
  • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  • For use with Plastic or Soft Metal Tubing


 

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
Justin

Exactly what I needed to hook up my water line to my sink on my coffee cart.

J
Justin Runyon
This is the piece you're looking for

If you're looking to hook up a pitcher rinser or sink faucet in a coffee cart, this is the piece you haven't been able to find at any hardware store, plumbing store, etc. It took me forever to realize that this was the one thing I was missing. If you're hooking up a Flojet (or similar), you'll bring the 1/4" tube to the 3/8" tube with another adapter piece, then the 3/8" tube to this so that it connects to the rinser/sink line. Don't hesitate - buy it now so you can finish your project sooner!

G
George Farago
Perfect fit for my GS3

This works perfectly with my GS3 plumbed in. Thanks Caffewerks for the quick and easy recommendations.

V
Voltage Coffee Project
Works perfectly as intended.

After searching high and low to find an adapter for the water line on a La Marzocco GS3, this was the one part we needed to connect it to a pex water line for using with the Simple Cart System. Additionally, many RO water systems use pex tubing in this size, so going back and forth between portable cart mode and in-line water is a breeze.

E
Emily Kliewer
Super thankful! So rare to find!

I had such trouble finding a John Guest Push Fit accessory to fit my waterline connected to my La Marzocco Espresso Machine. After numerous emails and many purchases from other companies, I was super thankful for Zachary and his diligence in leading me directly to what I needed. Very pleased!

12
3/8" Tube OD x 1/2" MNPTF Connector, Caffewerks

Push Fit 3/8" Tube x 1/2" NPT

$5.75
/
Shipping calculated at checkout.

Connect and disconnect tubing without tools. Meets FDA standards & NSF listed. O-ring/collet design. Body is polypropylene, O-rings are EPDM. Collet is polypropylene with stainless steel teeth. Max 150 PSI @70°F, 60 PSI at 140°F. Working Temp: 33°F to 140°F. Will withstand a full vacuum. Use fittings with rigid tubings. Tube-to-hose stems and elbows let you use soft tubing. Create rotating swivel connections by connecting special stem adapters with male pipe threads together. White in color.

 

*manufacturer may vary*

Email or fill out question box below with any questions 

Push Fit 3/8" tube X 3/8" Flare Female Connector

$5.25
/
Shipping calculated at checkout.

Push Fit Female Adapter Flare - 3/8 tube x 3/8 Flare

This is the connector you need when installing a coffee brewer with a 3/8 Male  Flare fitting.

 

Complete installation kits are also available here.

 

*manufacturer may vary*

Email or fill out question box below with any questions 
Flojet Poly Tube Fitting 1/4"port x 3/8 tube

Push Fit 3/8" Tube X 1/4" Flojet Fitting

$6.99
/
Shipping calculated at checkout.

Flojet Poly Tube Fitting 1/4"port x 3/8 tube

These fittings work with the Flojet LF and Bevjet series pumps 1/4 port x 3/8 tube

 

*manufacturer may vary*

Email or fill out question box below with any questions 

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
David Gurney
Just what I needed.

Caffewerks was the only place I could find the Flojet 1/4 inch to JG 3/8 tube fitting. Arrived fast and did what I needed it to do. I was plumbing a small RV water system the used John Guest fittings after the pump.

3/8" JG SPEEDFIT X 1/2" FEMALE BSPP-GREY

Push Fit 3/8" Tube X 1/2" Female BSPP

$8.95
/
Shipping calculated at checkout.
3/8" JG SPEEDFIT X 1/2" FEMALE BSPP-GREY
Used with pitcher rinsers and shurflo pump connections. Fits 1/2" British Standard Threads x 3/8 tube
  • Leak Resistant Dual EPDM O-rings
  • Chemical Resistant Polypropylene
  • Certified to NSF/ANSI Standard 58
  • 304 Stainless Steel Gripping Teeth
  • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
  • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
  • For use with Plastic or Soft Metal Tubing
  • Color : Grey
  • Material : Polypropylene
  • NSF/ANSI Certified : Yes
  • O-Rings : EPDM (x1)

*manufacturer may vary*

Email or fill out question box below with any questions 

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Tyron Clemmons

I got everything I ordered on time. Will order again.

OMNIPURE MOUNTING CLIP - 2" DIAMETER (SINGLE CLIP) - WHITE

OMNIPURE MOUNTING CLIP - 2" DIAMETER (SINGLE CLIP) - WHITE

$3.75
/
Shipping calculated at checkout.

 

Omnipure Mounting Clip - 2" Diameter (single clip) - White

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    3/8" MUR-LOK CHECK VALVE-BLACK, RED COLLET

    Push Fit 3/8" Check Valve - Black, Red Collet

    $13.75
    /
    Shipping calculated at checkout.

     

    0.3 cracking pressure 3/8 tube check valve.

    Use before pitcher rinsers, sinks, espresso coffee machines.

    Use between pumps and accumulators. 

    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : Black
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer may vary*

    Email or fill out question box below with any questions 
    3/8" TUBE X 3/8" STEM ELBOW-BLACK

    Push Fit 3/8" Tube X 3/8" Stem Elbow - Black

    $5.95
    /
    Shipping calculated at checkout.

    3/8" TUBE X 3/8" STEM ELBOW-BLACK

    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : Black
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    • *manufacturer may vary*

      Email or fill out question box below with any questions 

    Push Fit 3/8" Tube X 7/16"-24 UNS

    $4.95
    /
    Shipping calculated at checkout.

    3/8" TUBE X 7/16"-24 UNS connects to faucet threads on single tap faucets.

    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : White
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer may vary*

    Email or fill out question box below with any questions 
    EZ ANGLE STOP ADAPTER - 3/8" ML

    EZ ANGLE STOP ADAPTER - 3/8" ML

    $7.95
    /
    Shipping calculated at checkout.

    This fitting connects to your existing 3/8 compression / 9/16 UNEF cold water connection adding a 3/8 tube push fitting that can then be run to your device.

     EZ Angle Stop Adapters are the simplest way to connect any water-using appliance from icemakers to espresso coffee equipment. Constructed of chemical resistant Polypropylene.

    *manufacturer may vary*

    Email or fill out question box below with any questions 
    3/8" TUBE 2-WAY DIVIDER-BLACK

    Push Fit 3/8" Tube 2-Way Divider - Black

    $7.95
    /
    Shipping calculated at checkout.
    3/8" TUBE 2-WAY DIVIDER SPLITTER - BLACK
    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : Black
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer may vary*

    Email or fill out question box below with any questions 
    3/8" TUBE X 3/8" MALE NPTF-BLACK

    Push Fit 3/8" Tube X 3/8" Male NPTF-Black

    $5.95
    /
    Shipping calculated at checkout.
    • 3/8" TUBE X 3/8" MALE NPTF-BLACK
    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : Black
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer may vary*

    Email or fill out question box below with any questions 
    3/8" MUR-LOK CHECK VALVE, RED COLLET

    Push Fit 3/8" Check Valve, Red Collet

    $13.75
    /
    Shipping calculated at checkout.

    3/8" MUR-LOK CHECK VALVE, RED COLLET

     

    • 0.3 cracking pressure
    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : White
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer may vary*

    Email or fill out question box below with any questions 
    3/8" TUBE UNION TEE

    Push Fit 3/8" Tube Union Tee

    $4.95
    /
    Shipping calculated at checkout.

    A 3/8" Tube three-way union tee. 

    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : white
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer may vary*

    Email or fill out question box below with any questions 

    Customer Reviews

    Based on 1 review
    100%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    J
    John Kirk
    Boom

    Snip. Snip. Click. Click. Click. and my second machine was up and running. So easy. So efficient. Cheers-

    3/8" TUBE X 1/4" TUBE UNION

    Push Fit 3/8" TUBE X 1/4" TUBE UNION

    $4.95
    /
    Shipping calculated at checkout.

    Adapt 1/4 tube to 3/8 tube

    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : White
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer may vary*

    Email or fill out question box below with any questions 

    Push Fit 3/8" Tube X 1/2" Male NPTF

    $5.95
    /
    Shipping calculated at checkout.

    3/8" TUBE X 1/2" MALE NPTF

    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : white
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer and color may vary*

    Email or fill out question box below with any questions 
    3/8" TUBE X 3/4" FEMALE GARDEN HOSE THREAD

    Push Fit 3/8" Tube X 3/4" Female Garden Hose Thread

    $8.95
    /
    Shipping calculated at checkout.

    Connect from 3/4 Garden hose thread connections to 3/8 beverage tubing.

    • Leak Resistant Dual EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : Black
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM (x2)

    *manufacturer may vary*

    Email or fill out question box below with any questions 
    1/4” stem x 3/8” tube plug in elbow

    Push Fit 3/8" Tube x 1/4" Stem Elbow

    $6.95
    /
    Shipping calculated at checkout.

    Perfect for converting Flojet BW5000 systems over to 3/8 beverage tube.

    *manufacturer may vary*

    Email or fill out question box below with any questions 

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    Push Fit 3/8" TUBE X 3/8" TUBE UNION ELBOW-BLACK

    Push Fit 3/8" TUBE X 3/8" TUBE UNION ELBOW-BLACK

    $4.65
    /
    Shipping calculated at checkout.

    3/8" TUBE X 3/8" TUBE UNION ELBOW-BLACK

     

    Features:

    • Leak Resistant Dual EPDM O-rings
    • UV and Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing

    *manufacturer may vary*

    Email or fill out question box below with any questions 

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    Push Fit 3/8" Tube X 1/4" Female Flare Fitting

    Push Fit 3/8" Tube X 1/4" Female Flare Fitting

    $5.25
    /
    Shipping calculated at checkout.

    Push Fit Female Adapter Flare - 3/8" tube x 1/4" Flare

    This is the connector you need when installing a coffee brewer with a 1/4" Male  Flare fitting.

     

    Complete installation kits are also available here.

    *manufacturer may vary*

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    Push Fit 3/8" Tube Stem Branch Tee

    Push Fit 3/8" Tube Stem Branch Tee

    $5.95
    /
    Shipping calculated at checkout.

    A 3/8" Tube Stem Run Tee. 

    • Leak Resistant EPDM O-rings
    • Chemical Resistant Polypropylene
    • Certified to NSF/ANSI Standard 58
    • 304 Stainless Steel Gripping Teeth
    • 150 p.s.i. @ 70ºF (10 Bar @ 20ºC)
    • 60 p.s.i. @ 140ºF (4 Bar @ 60ºC)
    • For use with Plastic or Soft Metal Tubing
    • Color : white
    • Material : Polypropylene
    • NSF/ANSI Certified : Yes
    • O-Rings : EPDM

    Email or fill out question box below with any questions 

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Push Fit 3/8" 30 PSI Pressure Regulator

    $15.95
    /
    Shipping calculated at checkout.
    These regulators work well with all of our pitcher rinser products and can be used inline before most any coffee brewing equipment.

    By maintaining a consistent and controlled water pressure, a pressure regulator helps prevent damage to plumbing fixtures, appliances, and pipes due to excessive pressure. It ensures a steady flow of water throughout the system, promoting efficient operation and prolonging the lifespan of the components.  


    This water pressure regulator is designed to control and maintain water pressure in a plumbing system. It specifically operates within a range of 30 pounds per square inch (PSI), which is equivalent to approximately 0.2-0.3 megapascals (MPa).

    This water pressure regulator is equipped with 3/8 push fittings, which are a type of quick-connect fitting we use in all our systems

    By maintaining a consistent and controlled water pressure, a regulator helps prevent damage to plumbing fixtures, appliances, and pipes due to excessive pressure. It ensures a steady flow of water throughout the system, promoting efficient operation and prolonging the lifespan of the components.  

    In the case of this specific water pressure regulator, it is designed to operate within a range of 0.2-0.3 MPa, which corresponds to approximately 30 PSI. This means that the regulator will aim to keep the water pressure within this range, adjusting as necessary to ensure the pressure remains consistent and within the desired limits.

    Customer Reviews

    Based on 2 reviews
    100%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    A
    Alvaro Gomez
    Great service

    Great product easy to work with

    R
    Robert

    Worked as described.

    Push Fit 3/8" TUBE Stem Run Tee

    Push Fit 3/8" TUBE Stem Run Tee

    $5.98
    /
    Shipping calculated at checkout.
    3/8 tube x 3/8 tube x 3/8 stem push fitting for use with LDPE and Polyurethane 3/8 tubing

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    Push Fit 3/8" TUBE Stem Plug In Elbow

    Push Fit 3/8" TUBE Stem Plug In Elbow

    $5.98
    /
    Shipping calculated at checkout.
    3/8 STEM x 3/8 tube Elbow push fitting for use with LDPE and Polyurethane 3/8 tubing

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    Push Fit 1/2" TUBE x 3/8 Tube Union Elbow

    Push Fit 1/2" TUBE x 3/8 Tube Union Elbow

    $5.95
    /
    Shipping calculated at checkout.
    1/2'' Tube x 3/8'' Tube Union Elbow-Black
    Caffewerks Polypropylene Fittings are designed for fluid applications where risk of chemical attack and/or leak resistance is of concern.
    Features:
      • Leak Resistant Dual EPDM O-rings
      • UV and Chemical Resistant Polypropylene
      • Certified to NSF/ANSI Standard 58
      • 304 Stainless Steel Gripping Teeth
      • 150 p.s.i. @ 70°F (10 Bar @ 20°C)
      • 60 p.s.i. @ 140°F (4 Bar @ 60°C)
      • For use with Plastic or Soft Metal Tubing
    Origin Country: United States

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Push Fit 3/8 Tube x 1/4 Male BSPT // LUCCA Braided line fitting

    $5.95
    /
    Shipping calculated at checkout.

     

    This fitting is used on some espresso machine brands like the Lucca / La Spaziale range of machines.

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)